NDIS Driver for Windows for WorkGroup 3.11 Introduction: ============= This document shows you how to install Windows for Workgroup 3.11 NDIS driver. Location of Driver: \WFW311\DLKRTS.DOS Contents of the Subdirectory: ============================= OEMSETUP.INF The setup information file for WFW311. DLKRTS.DOS The enhanced mode NDIS2 driver. Installation: ============= Before starting with the installation process, make sure that the adapter is properly installed and configured. Setup Procedure: ---------------- 1) Start the Windows for Workgroup 3.11. 2) Select the "Windows Setup" icon in the Main Group. 3) Select the "Options" item. 4) Select the "Change Network Settings.." item. 5) Select the "Drivers" button. 6) Select the "Add Adapter.." button. 7) Select "Unlisted or Updated Network Adapter" 8) Insert the adapter driver disk with OEMSETUP.INF and DLKRTS.DOS and specify the path A:\WFW311. 9) Press <Enter> to select "D-Link DFE-538TX 10/100 Adapter". 10) Click "Setup..." if you want to modify the advanced features. 11) Close each windows and restart the computer.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.