<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> << Netgear ME102 802.11b Wireless Access Point >> << Firmware Release Version 1.4h.3 >> << USB Manager Release Version 1.7.6.16 >> << SNMP Manager Release Version 1.7.6.16 >> << January 14, 2002 >> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++ + IT IS IMPORTANT THAT YOU READ THIS FILE BEFORE + + UPGRADE THE PRODUCT!!! + ++++++++++++++++++++++++++++++++++++++++++++++++++ Table of Contents ================= 1. Introduction 2. What's New? 3. Getting Started 4. Known Problems 5. Known Limitations 6. Technical Support 1. Introduction ============ This release includes the upgrade for ME102 802.11b Wireless Access Point 1) Firmware: From Version V1.3i to V1.4h.3 2) USB Manager From Version V1.5 to V1.7.6.16 3) SNMP Manager From Version V1.7.0.0 to V1.7.6.16 Note: You must upgrade the USB Manager and SNMP Manager in order to manage the ME102 with firmware version V1.4h.3. 2. What's New? =========== - Support 128-bit WEP Encryption - Support wireless bridge functions: Point-to-Point and Point-to-MultiPoint - Support Access Point Client feature - Support MAC Address Control 3. Getting Started =============== Please refer to the upgrade procedure for the step-by-step upgrade procedure. 4. Known Problems ============== a. The Wireless stations will not be able to communicate with each other if the Power Saving Mode is enabled. b. The USB Manger is locked up after applying the change without the USB cable connected. You may terminate the ME102 USB Manager Task from Windows Task Manager and then restart the USB Manager with the USB cable connected. 5. Known Limitations ================= a. The subset mask setting is disabled in this release. ME102 will use 255.255.255.0 instead. 8. Technical Support ================= You’ll find technical support information at: http://www.NETGEAR.com/ through the customer service area. If you want to contact technical support by telephone, see the support information card for the correct telephone number for your country.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.