1. 9527144.exe Driver
2. readme.txt File Contents

readme.txt Driver File Contents (9527144.exe)

Information and Instructions about this download file

=======================
File Description:  610 Motherboard BIOS Update
Revision:  MY86510J.15A.0040.P03
Operating System:  All operating systems
Driver Part Number:  9527144
Date:  02/26/2004
=======================


Table of Contents
=======================
Overview
Identification
Installation
Removal
Troubleshooting
Reason for Update
Applicable Part Numbers
=======================


Overview

This is the P03 BIOS for the MY86510J Gateway 610 Media Center PC motherboards.


Identification

To confirm that this is the correct BIOS update for your motherboard, perform the following steps.

If the computer is turned off:

1.  Turn on the computer.  On your keyboard, repeatedly press the F1 key to enter the BIOS Setup Utility.

2.  In the BIOS Setup Utility, on the Main tab, look for the BIOS version line.  The version needs to read MY86510J.xxx.xxxx.Pxx (where x is variable characters).  The BIOS prefix MY86510J is constant and specifically identifies the correct motherboard.

3.  If this is correct, this is the correct BIOS update for your motherboard.  Press the F10 key to exit the BIOS Setup Utility.

If the computer is turned on and in Windows:

1.  From the Start menu, click Shut Down.  In the Shut Down Windows dialog box, select Restart, and then click Yes.

2.  As soon as the computer restarts, on your keyboard, repeatedly press the F1 key to enter the BIOS Setup Utility.

3.  In the BIOS Setup Utility, on the Main tab, look for the BIOS version line.  The version needs to read MY86510J.xxx.xxxx.Pxx (where x is variable characters).  The BIOS prefix MY86510J is constant and specifically identifies the correct motherboard.

4.  If this is correct, this is the correct BIOS update for your motherboard.  Press the F10 key to exit the BIOS Setup Utility.


Installation

Prepare your computer

Before updating your computer's BIOS, Enter the current BIOS Setup Utility, and then write down each of the current settings in the event that this information is needed again after the upgrade.  

Performing the update

1.  After you have downloaded and double-click the BIOS update file (9527144.exe), the files self-extract and copy into the C:\Cabs\9527144 directory on the hard drive.

2.  From the Start menu, click Run.

3.  In the Run dialog box, type: C:\Cabs\9527144\MY86510J_P03.exe.  Click OK.

4.  In the Intel(r) Express BIOS Update Setup window, in the Welcome dialog box, click Next.

5.  In the Software License Agreement dialog box, click Yes.

6.  In the Finish and Reboot dialog box, read the information and ensure that there is a check mark for the option Yes, I want to complete the BIOS update.  

7.  Note the WARNING message:  FOR THE NEXT 3 MINUTES DO NOT POWER OFF YOUR SYSTEM.  Your system will perform an automatic shutdown and reboot process.  Powering down before completion of this reboot process may cause your computer to require service by the system manufacturer.

8.  Click Finish. 

9.  In the Warning dialog box, the message identified in Step 7 is repeated.  Click OK.

10.  Please wait for the process to complete the restart sequence.

11.  When the computer shuts down, it may appear to take a longer period of time to restart.  This is considered normal and a part of the BIOS update process.  Yellow text appears on the display identifying the current version of BIOS and then the new version of the BIOS being loaded on the system.  Additionally, it identifies the memory areas of the BIOS as they are being changed until completed.  The computer then restarts again into the operating system.  

12.  The Intel(r) Express BIOS Update dialog box prompts that the Express BIOS update has completed successfully.  Click OK.


Removal

A motherboard must have a BIOS to operate, therefore there is no removal procedure.


Troubleshooting

If you have difficulties installing this BIOS update, download the file again, and then ensure that all installation steps in this document are followed.  If a checksum error message appears, enter the BIOS Setup Utility, change to default values, and then restart the computer.  


Reason for Update

P03-0040

* Solve the system hang issue while using Ambit home 120 Broadband Internet
* Add the solution for sometimes system hang when you press F2 to entering setup menu
* Add the solution for USB device boot priority issue.
 

Applicable Part Numbers

610 Media Center PCs:  2900005, 2900006, 2900007, 2900073, 2900209, 2900210, 2900211