1. ep325.zip Driver
2. PCNFS.TXT File Contents

PCNFS.TXT Driver File Contents (ep325.zip)

NDIS 2.0 Driver for SUN PC-NFS

Installation driver:       ( Location of driver :     A:\MSCLIENT )
====================
1. Edit the CONFIG.SYS file to include the following command line , and
   reboot the PC:

   Device=c:\dos\ansi.sys

2. Insert the  PC-NFS Installation diskette into the PC's floppy  drive.
   Type the following from DOS and press <Enter> to bring up the  PC-NFS
   installation screen:

   INSTALL      <Enter>

3. Follow  screen prompts to configure your screen display. For example,
   press <M> to choose mono display,or press <C> to choose color display
   , or press  <ESC> to cancel the installation.

4. When the " Install the Basic PC-NFS files " window appears onscreen ,
   select "Install Full PC-NFS" from the choice list.

5. " Specify the target PC-NFS  installation  directory , "by typing the
   appropriate path in the field provided.For example, C:\NFS.Then press
   <Enter> to continue.

6. Carefully  read  and  respond  to  each  prompt that appears onscreen,
   indicating the suitable selections for your system.

7. When you reach the prompt that reads , " Configure an Ethernet network
   connection," choose "Ethernet" from the choice list.Then press <Enter>
   to confirm your choice.

8. Choose the network adapter you will use. Select " NDIS " from the list
   shown onscreen. Then press <Enter> to confirm your choice.

9. Follow screen instructions to complete the process.You will be prompted
   to insert some PC-NFS distribution diskettes.  And  during the process,
   files from the diskettes will be copied into your hard disk drive.

10.When prompted to update your AUTOEXEC.BAT & CONFIG.SYS files,press "Y".

11.Your system will prompt  you when the installation process is complete.
   It will display the following message,"PC-NFS installation is complete"

12.The  system will create  two  subdirectories  in the destination drive,
   namely, \LANMAN and \NFS.

13.Create the NETWORK.BAT, DRIVES,BAT and HOSTS files.Specify the PC name,
   IP address , server name and server IP address in these files . See the
   section on Sample Configuration Files for examples.

14.Copy the NETWORK.BAT, DRIVES.BAT and HOSTS files into the\NFS directory
   of your server.

15.Copy the EP325.DOS file from the following directory:
       A:\MSCLIENT
   or    \MSLANMAN.DOS\DRIVERS\ETHERNET\EP325
   of your Driver Diskette to the newly created subdirectory (\LANMAN) on
   your destination drive.

16.Edit the CONFIG.SYS file using a text editor. Add the following command
   line before the NFS_NDIS driver specification:

      DEVICE=C:\LANMAN\EP325.DOS

17.Edit the  PROTOCOL.INI  file in the  \LANMAN directory , replacing the
   following:

    a. Replace the section name [your-mac-module] with [EP325].
    b. Replace the command line "drivername=YOURMAC$" with " drivername =
       EP325$"
    c. Replace the command line "bindings=YOUR-MAC-MODULE"with"bindings =
       EP325$"
    d. Assign the media type and line speed as used in sample PROTOCOL.INI
       file.

18.Reboot your computer. Then start the application you need. For example:
    a. Execute  NFSCONF.EXE to configure the system , such  as  mounting a
       virtual drive E:
    b. Execute TELNET.EXE to do terminal emulation.
===========================================================================
Sample Configuration Files
1. NETWORK.BAT

   REM stc* is a sample PC-NFS workstation name
   REM sun_srv is a sample PC-NFS server address
   NET START RDR stc*
   NET PCNFSD sun_srv
   NET NAME stc*

2. DRIVES.BAT

   REM specify connections to remote directory
   NET USE l:sun_srv:/usr2/down
   NET USE k:sun_srv:/mnt

3. HOSTS

   REM specify gateway address
   130.66.24.100 <gateway # updated>

   REM specify workstation's IP address
   130.66.24.101 stc

   REM specify server's IP address
   130.66.24.102 sun_srv

4. CONFIG.SYS

   shell=c:\command.com /P /E:526
   dos=high, UMB
   rem ----pcnfs install
   Device=c:\dos\ansi.sys
   DEVICE=C:\NFS\PCNFS.SYS  /m
   DEVICE=C:\NFS\SOCKDRV.SYS
   REM Specify PROTOCOL.INI directory
   DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
   REM EP325 NDIS driver name
   device=C:\LANMAN\EP325.DOS
   DEVICE=C:\LANMAN\NFS-NDIS.SYS
   FILES=50
   BUFFERS=50
   LASTDRIVE=v
   STACKS=9,256

5. PROTOCOL.INI file at the \LANMAN directory

   [protocol manager]
      drivername = PROTMAN$

   [EP325]
   ; PROTOCOL.INI for EP325
     DriverName = EP325$

   [NFS-NDIS]
      drivername = NFSLINK1
      bindings = EP325

6. AUTOEXEC.BAT
   ...
   SET TZ=PST8
   SET path=C:\;C:\NFS;C:\LANMAN
   SET NFSDRIVE=D
   REM Add the following line to bind NDIS driver
   C:lanman\netbind
   PRT *
   REM Execute application you need, e.g. NFSRUN
   NFSRUN