;----------------------------------------------------------------------------
; NETGEAR HA311 Wireless PCI Adapter
;
; INF file for installing NETGEAR HA311 Wireless PCI Adapter
; on Windows NT 4.0
;
;----------------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
ATH
[OptionsTextENG]
ATH = "NETGEAR HA311 Wireless PCI Adapter"
[AllFileConstants]
GenericInfVersion = " V1.3"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Atheros Communications, Inc."
CardName = "AR5BCB-01-01"
DISABLEPCMCIASYS = "0" ; "1"
PCIVendorID = 5772 ; 0x168c
; Devices: 0x0105, x0005, 0x0006, 0x0107, 0x0007, 0x0207
PCIDeviceIDList = { 261, 5, 6, 263, 7, 519 }
[FileConstants-ATH]
GenericAdapterName = "NETGEAR HA311 Wireless PCI Adapter"
GenericTitleName = "HA311 Wireless PCI Adapter"
GenericDriverName = "NETGEAR HA311 Wireless PCI Adapter"
GenericSysName = "AR5210N4.SYS"
GenericName = "AR5210N4"
ProductMajorVersion = "1"
ProductMinorVersion = "03"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "AR5210N4"
ProductSoftwareDesc = "NETGEAR HA311 Wireless PCI Adapter"
ProductSoftwarePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "ar5210n4Sys ndisDriver ar5210n4Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ar5210n4Sys"" yes no container"
NetRuleSoftwareClass = {"ar5210n4Driver basic"}
NetRuleSoftwareBindable = {"ar5210n4Driver ar5210n4Adapter non exclusive 100"}
ProductHardwareName = "AR5210N4"
ProductHardwareDesc = "NETGEAR HA311 Wireless PCI Adapter"
NetRuleHardwareType = "AR5210N4 ar5210n4Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ar5210n4Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "NETGEAR"
VERS1Product = "NETGEAR HA311 Wireless PCI Adapter"
VERS1Type = "HA311"
PCMCIA = 0
[GeneralConstants]
From = ""
To = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MaximumAllowed = 33554432
RegistryError = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExist = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec From 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;------------------------------------------------------------------------
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
Debug-Output "OEMSETUP.INF: InstallOption"
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set To = Begin
set From = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set From = end
set To = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Set the Default values
set bssTypeValue = *($(bssTypeValues), 1) ; bssType = AP (Infrastructure)
set sleepModeValue = *($(sleepModeValues), 2) ; sleepMode = Normal
set TurboEnableValue = *($(TurboEnableValues), 1) ; TurboEnable = Disabled
set defaultKeyValue = *($(defaultKeyValues), 1) ; defaultKey = Shared Key 1 (key0)
set uniqKeyLengthValue = *($(keyLengthValues), 1) ; uniqKeyLength = 40 bits
set keyLength0Value = *($(keyLengthValues), 1) ; keyLength0 = 40 bits
set keyLength1Value = *($(keyLengthValues), 1) ; keyLength1 = 40 bits
set keyLength2Value = *($(keyLengthValues), 1) ; keyLength2 = 40 bits
set keyLength3Value = *($(keyLengthValues), 1) ; keyLength3 = 40 bits
set MapRegistersValue = *($(MapRegistersValues), 4) ; 256
set QoSValue = *($(QoSList), 1) ; QoS = Disabled
set tpcValue = *($(tpcList), 1) ; tpc = Highest Power
; [ABC]
set MEMValue = *($(MEMList), 1)
set IRQValue = *($(IRQList), 6) ; default IRQ = 10
set SsidValue = ""
set NetworkAddressValue = ""
set uniqKeyValue = ""
set key0Value = ""
set key1Value = ""
set key2Value = ""
set Key3Value = ""
set privacyInvokedValue = "0" ; privacyInvoked = 0 (Disabled)
set beaconIntervalValue = "100"
set BusNum = 0
set DeviceNum = 0
set FunctionNum = 0
Set From = $(fatal)
Set To = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
; PCI Support.
; If a device is not found, don't error out => assume it's Cardbus.
Debug-Output "INF: Vendor ID = $(PCIVendorID)"
Debug-Output "INF: Device ID List= $(PCIDeviceIDList)"
set AdapterList = {}
ForListDo $(PCIDeviceIDList)
set PCIDeviceID = $($)
Shell $(UtilityInf), GetPCIInformation, $(PCIVendorID) $(PCIDeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; append all adapters onto the adapter list
ForListDo $($R0)
set AdapterList = >( $(AdapterList), {*($($),1), *($($),2), *($($),3)} )
EndForListDo
EndForListDo
Debug-Output "INF: Adapter List= $(AdapterList)"
ifstr(i) $(AdapterList) != {}
; Only support one PCI adapter
set BusNum = *(*($(AdapterList),1),1)
set DeviceNum = *(*($(AdapterList),1),2)
set FunctionNum = *(*($(AdapterList),1),3)
endif
; Check whether the same version of the software exists
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
; Add a new adapter card?
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExist = $(TRUE)
endif
endif
; DLL load addition
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
install "Install-Cpl"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
; Get the current values of all the parameters
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
; Get the other parameters; they're attached to the service parameters key
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExist = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
; Get the old values from the Registry [Get Values]
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "bssType"
set bssTypeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "sleepMode"
set sleepModeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TurboEnable"
set TurboEnableValue = $(ValueData)
else-ifstr(i) $(ValueName) == "defaultKey"
set defaultKeyValue = $(ValueData)
else-ifstr(i) $(ValueName) == "uniqKeyLength"
set uniqKeyLengthValue = $(ValueData)
else-ifstr(i) $(ValueName) == "keyLength0"
set keyLength0Value = $(ValueData)
else-ifstr(i) $(ValueName) == "keyLength1"
set keyLengthValue = $(ValueData)
else-ifstr(i) $(ValueName) == "keyLength2"
set keyLength2Value = $(ValueData)
else-ifstr(i) $(ValueName) == "keyLength3"
set keyLength3Value = $(ValueData)
else-ifstr(i) $(ValueName) == "MapRegisters"
set MapRegistersValue = $(ValueData)
else-ifstr(i) $(ValueName) == "QoS"
set QoSIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "tpc"
set tpcIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "Ssid"
set SsidValue = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkAddress"
set NetworkAddressValue = $(ValueData)
else-ifstr(i) $(ValueName) == "uniqKey"
set uniqKeyValue = $(ValueData)
else-ifstr(i) $(ValueName) == "key0"
set key0Value = $(ValueData)
else-ifstr(i) $(ValueName) == "key1"
set key1Value = $(ValueData)
else-ifstr(i) $(ValueName) == "key2"
set key2Value = $(ValueData)
else-ifstr(i) $(ValueName) == "key3"
set key3Value = $(ValueData)
else-ifstr(i) $(ValueName) == "privacyInvoked"
set privacyInvokedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "beaconInterval"
set beaconIntervalValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNum = $(ValueData)
else-ifstr(i) $(ValueName) == "SlotNumber"
set DeviceNum = $(ValueData)
else-ifstr(i) $(ValueName) == "FunctionNumber"
set FunctionNum = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBase" ; [ABC]
set MEMIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNum" ; [ABC]
set IRQIndex = $(ValueData)
endif
EndForListDo
; translate from registry value to listbox index
; e.g. 0/1 => disabled/enabled
set QoSValue = *($(QoSList), ~($(QoSValues),$(QoSIndex)))
ifstr(i) $(QoSValue) == ""
set QoSValue = *($(QoSList), 1)
endif
set tpcValue = *($(tpcList), ~($(tpcValues),$(tpcIndex)))
ifstr(i) $(tpcValue) == ""
set tpcValue = *($(tpcList), 1)
endif
; [ABC]
set MEMValue = *($(MEMList), ~($(MEMValues),$(MEMIndex)))
ifstr(i) $(MEMValue) == ""
set MEMValue = *($(MEMList), 1)
endif
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 1)
endif
adaptersetup = +
Set From = adapteroptions
adapteroptions = +
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set MapRegistersValue = $(Combo1Out)
set QoSIndex = $(Combo2Out)
set tpcIndex = $(Combo3Out)
; [ABC]
set MEMIndex = $(Combo4Out)
set IRQIndex = $(Combo5Out)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
; If installing, go create the necessary keys;
; if configuring, they're already open.
skipoptions =+
ifint $(OldVersionExist) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
; Add Software Component
ifint $(OldVersionExist) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwarePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
; $R1 contains the product version key handle
; $R2 contains the NetRules subkey handle
; $R3 contains the new Services key handle
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
set RegistryError = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
; Create the HARDWARE\Netcard region and its corresponding service
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
; REQUIRED: $(KeyParameters) contains service Parameters key handle
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; Add the rest of the parameters to the Services area
Debug-Output "OEMSETUP.INF: - Create Driver Parameters"
; Translate listbox index to registry value
; e.g. Disabled/Enabled to 0/1
set QoSValue = *($(QoSValues), ~($(QoSList), $(QoSIndex)))
set tpcValue = *($(tpcValues), ~($(tpcList), $(tpcIndex)))
; [ABC]
set MEMValue = *($(MEMValues), ~($(MEMList), $(MEMIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQIndex)))
set NewValueList = {{bssType, $(NoTitle),$(!REG_VT_SZ),$(bssTypeValue)},+
{sleepMode, $(NoTitle),$(!REG_VT_SZ),$(sleepModeValue)},+
{TurboEnable, $(NoTitle),$(!REG_VT_SZ),$(TurboEnableValue)},+
{defaultKey, $(NoTitle),$(!REG_VT_SZ),$(defaultKeyValue)},+
{uniqKeyLength, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyLengthValue)},+
{keyLength0, $(NoTitle),$(!REG_VT_SZ),$(keyLength0Value)},+
{keyLength1, $(NoTitle),$(!REG_VT_SZ),$(keyLength1Value)},+
{keyLength2, $(NoTitle),$(!REG_VT_SZ),$(keyLength2Value)},+
{keyLength3, $(NoTitle),$(!REG_VT_SZ),$(keyLength3Value)},+
{MapRegisters, $(NoTitle),$(!REG_VT_SZ),$(MapRegistersValue)},+
{QoS, $(NoTitle),$(!REG_VT_SZ),$(QoSValue)},+
{tpc, $(NoTitle),$(!REG_VT_SZ),$(tpcValue)},+
{Ssid, $(NoTitle),$(!REG_VT_SZ),$(SsidValue)},+
{NetworkAddress, $(NoTitle),$(!REG_VT_SZ),$(NetworkAddressValue)},+
{uniqKey, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyValue)},+
{key0, $(NoTitle),$(!REG_VT_SZ),$(key0Value)},+
{key1, $(NoTitle),$(!REG_VT_SZ),$(key1Value)},+
{key2, $(NoTitle),$(!REG_VT_SZ),$(key2Value)},+
{key3, $(NoTitle),$(!REG_VT_SZ),$(key3Value)},+
{privacyInvoked, $(NoTitle),$(!REG_VT_SZ),$(privacyInvokedValue)},+
{beaconInterval, $(NoTitle),$(!REG_VT_SZ),$(beaconIntervalValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
{DriverDesc,$(NoTitle),$(!REG_VT_SZ),$(GenericAdapterName)},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+
{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+
{DriverType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
; [ABC]
{MemoryMappedBase,$(NoTitle),$(!REG_VT_DWORD),$(MEMValue)},+
{InterruptNum,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1},+
{PlatformType,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PCMCIAKey)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
; ----------------------------------------------------------------------------------------------------------
; add driver info to the SYSTEM\CurrentControlSet\Services\resman\Database\....... for CardWizard
; ----------------------------------------------------------------------------------------------------------
set CWKey = "SYSTEM\CurrentControlSet\Services\resman"
set CWDatabaseKey = $(CWKey)"\Database"
set CWManufacturerKey = $(CWDatabaseKey)"\"$(Manufacturer)
set CWCardNameKey = $(CWManufacturerKey)"\"$(CardName)
Debug-Output "OEMSETUP.INF: Check the presence of CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" $(CWKey) $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
goto successful
endif
Debug-Output "OEMSETUP.INF: Create Registry Keys for CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "OEMSETUP.INF: Create Registry Keys (for CardName)"
OpenRegKey $(!REG_H_LOCAL) "" $(CWDatabaseKey) $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {$(Manufacturer),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" $(CWManufacturerKey) $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {$(CardName),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),$(GenericName)}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:"$(CardName)
CloseRegKey $(MyPcmciaHandle)
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} ; '0' restores the driver to "BOOT"
CloseRegKey $(PCMCIAKey)
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
; Update Software\ManufacturerName\ProductName\CurrentVersion and
; install new drivers and INF
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(From)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(From)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryError)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETUP.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Cpl]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "NETGEAR HA311 Setup Disk for NT"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETUP.INF, SIZE=58000, RENAME=$(!UG_Filename)
[Files-Dll]
1, AR5210N4.DLL, SIZE=21000
[Files-Cpl]
1, STACFG00.CPL , SIZE=21000
1, STACFG.HLP , SIZE=21000
[Files-ATH]
1, AR5210N4.SYS, SIZE=53000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "AR5210N4.DLL"
[FileConstantsENG-ATH]
FunctionTitle = $(GenericTitleName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
bssTypeList = ^(bssTypeChoices, 1)
bssTypeValues = ^(bssTypeChoices, 2)
sleepModeList = ^(sleepModeChoices, 1)
sleepModeValues = ^(sleepModeChoices, 2)
TurboEnableList = ^(TurboEnableChoices, 1)
TurboEnableValues = ^(TurboEnableChoices, 2)
defaultKeyList = ^(defaultKeyChoices, 1)
defaultKeyValues = ^(defaultKeyChoices, 2)
keyLengthList = ^(keyLengthChoices, 1)
keyLengthValues = ^(keyLengthChoices, 2)
MapRegistersList = ^(MapRegistersChoices, 1)
MapRegistersValues = ^(MapRegistersChoices, 2)
QoSList = ^(QoSChoices, 1)
QoSValues = ^(QoSChoices, 2)
tpcList = ^(tpcChoices, 1)
tpcValues = ^(tpcChoices, 2)
MEMList = ^(MEMChoices, 1)
MEMValues = ^(MEMChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
[DialogConstantsENG-ATH]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-ATH]
DlgType = "RadioCombination"
DlgTemplate = "AR5210N4"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO}
Combo1Label = "Map Registers:"
Combo2Label = "QoS (802.11e):"
Combo3Label = "Transmit Power Control:"
; [ABC]
Combo4Label = "Memory:"
Combo5Label = "IRQ:"
Combo1List = $(MapRegistersList)
Combo1Out = $(MapRegistersValue)
Combo2List = $(QoSList)
Combo2Out = $(QoSValue)
Combo3List = $(tpcList)
Combo3Out = $(tpcValue)
; [ABC]
Combo4List = $(MEMList)
Combo4Out = $(MEMValue)
Combo5List = $(IRQList)
Combo5Out = $(IRQValue)
; [ABC]
;ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
;ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[bssTypeChoices]
bssType_1 = "AP (Infrastructure)", 1
bssType_2 = "Ad Hoc", 2
[sleepModeChoices]
sleepMode_0 = "Off", 0
sleepMode_1 = "Normal", 2
sleepMode_2 = "Maximum", 1
[TurboEnableChoices]
TurboEnable_0 = "Disabled", 0
TurboEnable_1 = "Enabled", 1
[defaultKeyChoices]
defaultKey_0 = "Shared Encryption Key 1", 0
defaultKey_1 = "Shared Encryption Key 2", 1
defaultKey_2 = "Shared Encryption Key 3", 2
defaultKey_3 = "Shared Encryption Key 4", 3
defaultKey_4 = "Unique Encryption Key" , 4
[keyLengthChoices]
keyLength_0 = "40 bits", 5
keyLength_1 = "104 bits", 13
keyLength_2 = "128 bits", 16
[MapRegistersChoices]
MapRegisters_1 = "32", 32
MapRegisters_2 = "64", 64
MapRegisters_3 = "128", 128
MapRegisters_4 = "256", 256
MapRegisters_5 = "384", 384
MapRegisters_6 = "512", 512
[QoSChoices]
QoS_0 = "Disabled", 0
QoS_1 = "Enabled", 1
[tpcChoices]
tpc_0 = "Highest Power" , 0
tpc_1 = "50% Power" , 1
tpc_2 = "25% Power" , 2
tpc_3 = "12% Power" , 3
tpc_4 = "Lowest Power" , 4
; [ABC]
[MEMChoices]
MEM_1 = "0xF1000000",4043309056
MEM_2 = "0xF2000000",4060086272
MEM_3 = "0xF3000000",4076863488
MEM_4 = "0xF4000000",4093640704
MEM_5 = "0xF5000000",4110417920
MEM_6 = "0xF6000000",4127195136
MEM_7 = "0xF7000000",4143972352
; [ABC]
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
;IRQ_12 = "12",12
;IRQ_13 = "13",13
;IRQ_14 = "14",14
IRQ_8 = "15",15
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.