Intel DMI-SNMP Client Instrumentation v1.0.0
=======================================================================
Release Notes
------------------------------------------
This file contains the following sections:
- Release contents
- Target Environments
- Summary of Features
- Prerequisites.
- Installation instructions
- Usage with Applications.
- Unsupported features in the Intel DMI-SNMP Client Instrumentation
- Reference files / screens
Release contents:
=================
IntelNDM.nlm - Intel DMI-SNMP Network Device Manager NLM, Version 1.00
Intel_NI.nlm - Intel DMI-SNMP Client Instrumentation NLM, Version 1.00
Intel_NI.mif - Intel DMI-SNMP Client Instrumentation MIF, version 1.0
MIF file.
IntelDrv.dat - Intel DMI-SNMP managed Drivers Name and Export Symbols,
version 1.0 DAT file.
DMI2SNMP.NLM - Intel SNMP Extension module
Intel.mib - Intel Master MIB
Intelnic.mib - Intel Network Interface Card MIB
Target Environments
====================
Novell NetWare* 4.11
Summary of Features
====================
a. Features
This release provides the following features:
- Supports only Pro 100 and Pro 1000 PCI based Ethernet boards
- Has been tested only with the Intel DMI service Provider,
HP-OpenView* Network Node Manager 5.0, Intel Deviceview for web
and Intel DMI Explorer.
- Operating System: Novell NetWare 4.11
b. Attributes Support
The following shows what you should expect to see:
GROUP ATTRIBUTE SUPPORT
~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Component ID Manufacturer Yes
Product Yes
Version No
Serial Number No
Installation Yes
Verification Yes
802 Driver Index Yes
Name Yes
Version Yes
Description Yes
Size Yes
Interface Yes
Interface Ver. Yes
Interface Desc. Yes
802 Port Index Yes
Permanent addr. Yes
Current addr. Yes
Connector type Yes
Data rate Yes
Packets xmitted Yes
Bytes xmitted No
Packets rcv'd Yes
Bytes rcv'd No
Xmit errors Yes
Receive errors Yes
Host errors Yes
Network errors Yes
Ether Group
Number of frames recv'd with checksum errors Yes.
Frames received with alignment error Yes.
Frames transmitted with one collision Yes.
Frames transmitted with more than one collision Yes.
Frames transmitted after deferral Yes.
Frames not transmitted due to collisions Yes.
Frames not received due to overrun Yes.
Frames not transmitted due to underrun Yes.
SQE Test Errors No.
Times carrier sense signal lost Yes.
Late collisions detected Yes.
Frames received with errors Yes.
Ethernet Chip set Yes.
Prerequisites:
==============
1. Novell NetWare v4.11
2. Novell NetWare SNMP Master Agent.
3. Intel DMI Service Provider. Please download the Service provider
from www.intel.com/ial/wfm/tools/netsdk/index.htm and follow
installation instructions.
Note: It is strongly recommended that both NetWare SNMP and Intel
DMI Service Provider be installed before installing this
package.
Installation instructions:
==========================
1. Install the Intel DMI Service provider for NetWare taking extra
care to follow the instructions provided with the download. This
requires a Windows NT 4.0 station on your network to install from,
with your NetWare server mapped as a drive.
2. On the NetWare server load the Install NLM from the command prompt.
Select Other Product options and appropriate Source drive e.g A:\dmi-snmp\snmp\nwserver
3. Follow the directions given by the 'Intel DMI-SNMP Client
Instrumentation' install from there.
Usage with Applications:
=========================
1. With SNMP Agent:
- Make sure that NetWare SNMP Agent NLM and Intel DMI Service
Provider are installed and configured
2. With SNMP Manager: (HP-Open View etc.)
- Load/compile intel.mib and intelnic.mib
3. Use Intel DMI Explorer or any other DMI compliant Management
application on the Management Station (any Win32 Client connected
to NetWare Server) to access management information.
Unsupported features in the Intel DMI-SNMP Client Instrumentation
==================================================================
1. An exclusive Instrumentation directory for placing the NLM files
2. SETS/TRAPS.
Screens
========
Screen Name Screen Description
----------- -------------------
Intel DMI-SNMP Network Device Manager Instrumentation Device manager
module.
Intel DMI-SNMP Client Instrumentation Component Instrumentation
layer.
Messages
========
You may see the following messages under the specified conditions.
Condition: When the Instrumentation is up and running
Context 1: Unload a driver managed by the DMI Client Instrumentation
Message: Unloading the driver will cause DMI-SNMP Client
Instrumentation and Intel DMI-SNMP Network Device Manager
<Intel_NI.nlm and IntelNDM.nlm> not to support queries for its
attributes.
Context 2: Load a driver managed by the DMI Client Instrumentation
Message: You MUST unload Intel DMI-SNMP Network Client
Instrumentation and Intel DMI-SNMP Network Device Manager
<Intel_NI.nlm and IntelNDM.nlm> before loading a new LAN driver. If
you load the driver anyway, unload and load Instrumentation
immediately for SAFE functionality. Do not run queries WITHOUT
performing above mentioned steps.
Version: 06/01/98
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.