1. CEM33.exe Driver
2. ANSWER33.TXT File Contents

ANSWER33.TXT Driver File Contents (CEM33.exe)

[Unattended]
OemPreinstall = yes
NoWaitAfterTextMode = 1
NoWaitAfterGUIMode = 1
FileSystem = LeaveAlone
ExtendOEMPartition = 0
ConfirmHardware = no
NtUpgrade = no
Win31Upgrade = no
TargetPath = \WINNT    
OverwriteOemFilesOnUpgrade = no
OemSkipEula = yes



[UserData]
FullName = "User_Name"
OrgName = "Your_Company_Name"
ComputerName = Your_Company_Name
ProductId = "xxx-xxxxxxx"

[GuiUnattended]
OemSkipWelcome = 1
OEMBlankAdminPassword = 1
TimeZone = "(GMT-08:00) Pacific Time (US & Canada); Tijuana"
;AdvServerType = LANSECNT	; Needed for NT Server, Backup Domain Controller
;AdvServerType = LANMANNT	; Needed for NT Server, Primary Domain Controller
;AdvServerType = SERVERNT	; Needed for Nt Server, Server

[LicenseFilePrintData]		; Needed for NT Server
AutoMode = PerSeat		; Needed for NT Server

[Display]
ConfigureAtLogon = 0
BitsPerPel = 8
XResolution = 800
YResolution = 600
VRefresh = 60
AutoConfirm = 1

[Network]
InstallAdapters = SelectedAdaptersSection		
InstallProtocols = ProtocolsSection
InstallServices = ServicesSection
DoNotInstallInternetServer = Yes
InstallDC = Name_of_Domain_Controller
;JoinWorkGroup = Workgroup
JoinDomain = Name_of_Domain_to_join	;Required to join a Domain
CreateComputerAccount = Computer_Account_Name

[SelectedAdaptersSection]
CEM33XPS = OEMAdapterParamSection, \$oem$\net\CEM33

[OEMAdapterParamSection]
			; decimal equivalents for desired hex values must be specified		

;InterruptNumber = 15	; Parameters needed only if default settings will not work
;IoBaseAddress_1 = 640	;Network Port = 280,768=300,800=320;
;IOBaseAddress = 744	;Modem IO = 03E8,1016 = 03f8, 760 = 02F8, 744 = 02E8;  
;PCCARDAttributeMemoryAddress = 860160	; Memory Address = D2000,868352 = D4000,884736 = D8000,835584 = CC000,819200 = C8000;	
;Mode = IO		;Choices = 0 = IO or Memory Mapped = 1;

[ProtocolsSection]
NBF = NBFParamSection
TC = TCPIPParamSection
NWLNKIPX = NWLNKIPXParamSection
RASPPTP = RASPPTPParamSection

[RASPPTPParamSection]

[TCPIPParamSection]
IPAddress = 000.000.000.000
Subnet = 255.255.255.0
Gateway = 000.000.000.000
;DHCP=yes

[NBFParamSection]

[NWLNKIPXParamSection]

[ServicesSection]
NWWKSTA = NWWKSTAParamSection
RAS = RASParameterSection
STCPIP = InstallSimpleTCPSection

[InstallSimpleTCPSection]

[RASParameterSection]
DialoutProtocols = NETBEUI
DialinProtocols = NETBEUI
NetBEUIClientAccess = Network
IPXClientAccess = Network
PortSections = PortSectionParameters
;UseDHCP = YES			;Needed to obtain IP address from DHCP Server

[PortSectionParameters]
PortName = COM2			;This assumes the next port assignment is COM2
DeviceType = Modem
PortUsage = DialinOut
Device = "Modem of Xircom Ethernet+Modem (CEM 33.6)"


[NWWKSTAParamSection]
!DefaultScriptOptions = 0

[MODEM]

InstallModem = ModemParametersSection


[ModemParametersSection]

Com2 = "Modem of Xircom Ethernet+Modem (CEM 33.6)"
   						 ;Needs to be the same as above port assignment
                               
					         ;This assumes the next port assignment is COM2