SANbox SNMP MIB's (12/15/2004)
Overview
______________
The SANbox family of Fibre Channel switches support SNMP which allows monitoring and management
of a Switch using Simple Network Management Protocol (SNMP) for the supported MIBs.
Components
______________
qlogic_snmp_mib_YYYYMM.zip This is the zip file downloaded
Files Description
_________________________ _____________________________
/manuals/snmp_manual_1.3 SNMP Manual version 1.3 (59044-00 rev.a)
/snmp_manual_1.4 SNMP Manual version 1.4 (59047-00 rev.a)
/snmp_manual_2.0 SNMP Manual version 2.0 (59047-01 rev.a)
/snmp_manual_4.0 SNMP Manual version 4.0 (59047-02 rev.a)
/snmp_manual_4.1 SNMP Manual version 4.1 (59047-03 rev.a)
/snmp_manual_4.2 SNMP Manual Version 4.2 (59037-04 rev.a)
/snmp_manual_5.0 SNMP Manual Version 5.0 (59047-05 rev.a)
/mibs/fa_30.mib Fibre Alliance 3.0 MIB (firmware 3.05.50 and 1.0.x-1.3.x)
/fa_40.mib Fibre Alliance 4.0 MIB (firmware 1.4.x and higher)
/fe.mib Fabric Element MIB (rfc2837)
/qlogic.mib QLogic’s Proprietary MIB
/snmp_framework.mib SNMP Management Architecture MIB (rfc2571)
/readme_qlogic_snmp_mib.txt This readme file
Support Matrix
______________
Firmware version Switch FA Version Manual
3.05.50 SB fa_30.mib -
1.0.x - 1.3.x SB2 fa_30.mib snmp_manual_1.3
1.4.x - 1.5.x SB2 fa_40.mib snmp_manual_1.4
2.x - 3.x SB2 fa_40.mib snmp_manual_2.0
4.0 SB2 & 5200 fa_40.mib snmp_manual_4.0
4.1 SB2 & 5200 fa_40.mib snmp_manual_4.1
4.2 SB2 & 5xxx fa_40.mib snmp_manual_4.2
5.0 - x SB2 $ 5xxx fa_40.mib snmp_manual_5.0
Installation
______________
Download and extract the MIB files to a temporary directory. Refer to the SNMP
application for loading of the MIB files.
Manuals
______________
The SANbox Switch Installer's/User's Manual and the Switch Management
Installer's/User's Manual manuals are available on QLogic's support
web. http://support.qlogic.com
Comments
______________
For more information about SNMP, checkout the following websites:
http://www.fibrealliance.org
http://www.ietf.org
http://www.snmp.com
If you have questions or comments, please contact QLogic Technical Support:
Phone: (952) 932-4040
Email: support@qlogic.com
Web: http://support.qlogic.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.