\HELP\LINUX\LINUX.TXT NETGEAR FA511 CardBus Mobile Adapter ---------------------------------------- LINUX Driver Installation Overview ---------------------------------- Preamble -------- This software may be used and distributed according to the terms of the GNU Public License, incorporated herein by reference. This driver is for the Digital "Tulip" ethernet adapter interface. It should work with most DEC 21x4x-based chips/ethercards. This device driver also supports work-alike chips from ADMtek, ASIX, LiteOn, MXIC, STmicro, and relabeled PNIC chips from LinkSys and Netgear. This program was originally written and maintained by Donald Becker who may be reached as becker@scyld.com, or C/O Center of Excellence in Space Data and Information Sciences Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771. The program is further modified and customized for use in the NETGEAR FA511 CardBus Mobile Adapter. For customer support, please call your respective local Netgear technical support. Getting Started --------------- This installation guide describes the installation procedures of the most popular versions of Linux: RedHat Linux 6.0/6.1/6.2/7.0 and With other Linux variation, you can install it into the Monolithic Kernel or the Modular Kernel. Installation Procedure: ----------------------- 1. During installation of Linux, make sure that the "Development" selectionare (or C Development and Development Libraries for Redhat 6.0) and "Kernel Development" selectionare and "Workstation" selectionare choosen under "Component to Install" window. This will copy the C compiler and kernel development component into the system for compiling the driver. For RedHat 6.0, 6.1, 6.2, please upgrade PCMCIA-CS to version 3.1.19 (Please see note at the bottom for how to upgrade to version 3.1.19). For RedHat 6.0, 6.1 user, we recommend you to upgrade your system to 6.2 or 7.0. 2. Also in the Network Configuration window during installation, you will be asked if you want to configure LAN (not dailup) networking for your installed system. Answer YES. 3. Login as root. 4. Insert the Installation CDROM, and mount the disk into the system with the following command: mount -t iso9660 /dev/cdrom /mnt/cdrom 5. Copy the linux drivers from the CDROM into the system harddrive with the following command. Five files will be copied: tulip.c, pci-scan.h, kerncomp.h, tulip_cb.o, makefile. Command: cp /mnt/cdrom/linux/redhatx.x/* . 6. Compile tulip.c by executing "make" command at the prompt. The following command will be executed. for redhat 6.x gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 \ -c tulip.c -o tulip_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include for redhat 7.0 gcc -DCARDBUS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 \ -c tulip.c -o tulip_cb.o -I/usr/src/linux/pcmcia-cs-3.1.19/include \ -I/usr/src/linux/include 7. Find the names of the files in the /lib/modules directory. you might see the following directory. eg "2.2.14"... 8. Copy the newly compiled tulip.o into the latest kernel's modules. for redhat 6.0 cp tulip_cb.o /lib/modules/2.2.5-15/net/tulip_cb.o cp tulip_cb.o /lib/modules/2.2.5-15/pcmcia/tulip_cb.o for redhat 6.1 cp tulip_cb.o /lib/modules/2.2.12-20/net/tulip_cb.o cp tulip_cb.o /lib/modules/2.2.12-20/pcmcia/tulip_cb.o for redhat 6.2 cp tulip_cb.o /lib/modules/2.2.14-5.0/net/tulip_cb.o cp tulip_cb.o /lib/modules/2.2.14-5.0/pcmcia/tulip_cb.o for redhat 7.0 cp tulip_cb.o /lib/modules/2.2.16-22/net/tulip_cb.o cp tulip_cb.o /lib/modules/2.2.16-22/pcmcia/tulip_cb.o 9. Use vi or emac editor to append the following line into /etc/pcmcia/config card "NETGEAR FA511 CardBus Mobile Adapter" manfid 0x022d, 0x511A bind "tulip_cb" 10. reboot system. 11. You can check if the driver is properly activating the card using the "dmesg" command right after system bootup. ***Note*** How to upgrade to PCMCIA-CS-3.1.19 from old version on RedHat 6.0 1. Find the PCMCIA-CS-3.1.19 package pcmcia-cs-3.1.19.tar.gz on CD-ROM, you can also find it from website ftp://ftp.tux.org/util/pcmcia . 2. Copy pcmcia-cs-3.1.19.tar.gz to the directory /usr/src/linux 3. Uncompress the package using the following command tar xvfz pcmcia-cs-3.1.19.tar.gz this will generate the directory ./pcmcia-cs-3.1.19 4. Change to the directory pcmcia-cs-3.1.19 5. Execute the following commands make clean make config make all make install these will upgrade PCMCIA-CS to version 3.1.19 6. Execute the following commands to restart PCMCIA service /etc/rc.d/init.d/pcmcia stop /etc/rc.d/init.d/pcmcia startDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.