1. fa51v204.exe Driver
2. WIN95.TXT File Contents

WIN95.TXT Driver File Contents (fa51v204.exe)

\HELP\WIN95_98\WIN95.TXT

                  NETGEAR FA510 Fast Ethernet Cardbus Card
                  ----------------------------------------
             Driver Installation for Microsoft Windows 95 or Win95a
             ------------------------------------------------------

  Getting Started
  ---------------

  The initial releases of the Microsoft Windows 95 does not have support
  for Cardbus interface.  As a result, the NETGEAR FA510 Fast Ethernet
  Cardbus Card driver has to contain a Cardbus enabler to allow the the
  Cardbus card to work under the Win95 or Win95a environment.  For the
  FA510 Cardbus driver to function properly, the Win95 PCMCIA controller
  driver has to be disabled.

  It is highly recommended that the system be upgraded to Win95B (OSR2)
  or above where Cardbus support from the operating system is more
  complete.


  Determining the Win95 version
  -----------------------------

    To determine which version of Windows 95 is on the computer, complete
    the following steps.

      - Click on Start button in the lower left corner of the Win95 screen.
      - Select Setting and click on Control Panel.
      - In the Control Panel window, double click on the System icon.
      - When the System Properties window appears, the version indication
        for Windows 95 should be displayed.  You have Windows 95 if it
        displays:

            Microsoft Windows 95
              4.00.950
                 or
            Microsoft Windows 95
              4.00.950A

    Once determined that you have Win95 or Win95a, complete the following
    two procedures for the FA510 Cardbus card driver to function properly.


  Disabling PC Card Enabler in Win95
  ----------------------------------
    1.  Please do not insert the FA510 Cardbus Card at this time.
    2.  In the Control Panel, double-click the System icon.
    3.  System Properties window will appear, click the Device Manager tab.
    4.  Double-click PCMCIA Socket.
    5.  Click PCIC or compatible PCMCIA controller.
    6.  Click Remove.
    7.  The Remove Configuration windows will appear. Click OK and System 
        Settings Change window will appear.
    8.  Click Yes when prompted to restart the computer.

    When you restart the computer the first time after removing the
    PCIC device, you will be prompted to select a driver. Choose "Do
    not install a driver". This prompt will not be shown again.
  
  Installing the FA510 Cardbus driver
  -----------------------------------

    1.  Insert the NETGEAR FA510 Cardbus Card.
    2.  When you restart the computer the first time after removing the
        PCIC device, you will be prompted to select a driver.  Choose DO NOT 
        install a driver.  This prompt will not be shown again.   
    3.  Click on the Start button at the lower left corner of the screen.
    4.  Choose Settings and click Control Panel.
    5.  In the Control Panel window, double-click the Network icon.
    6.  In the Network dialog box, click Add.
    7.  In the Select Network Component Type window, double-click Adapter.
    8.  In the Select Network Adapter, click Have Disk. Insert the FA510 
        drivers and diagnostics diskette into the floppy drive.  Type
        "A:\" and click OK.
    9.  Select the "NETGEAR FA510 Fast Ethernet Cardbus Manual Load for
        Win95" and click OK.      
    10. In the Network window, click OK.  (The FA510 dialog box appears 
        and displays various settings.  An asterisk in any field indicates 
        that the current setting is being used.  Use the Up or Down arrow
        to adjust the setting until the asterisk disappears.) 
    11. Click OK and the Copying Files window will appear.
    12. Insert your original Windows 95 CD and click OK. (If Windows 95 was 
        pre-installed on your computer, the necessary files can be located
        in the \WINDOWS\OPTIONS\CABS directory.)
    13. Click Yes when prompted to restart the computer. 

    After rebotting, your computer will be ready to network with other
    computers.

  Known Limitation
  ----------------
    Since Windows 95 or 95a does not provide support for Cardbus and the
    Cardbus enabler comes from the FA510 Cardbus driver, you cannot use
    the FA510 Cardbus Card with another PCMCIA device..