\HELP\WIN2K\WIN2K.TXT
NETGEAR FA510 Fast Ethernet Cardbus Card
----------------------------------------
Driver Installation Microsoft Windows 2000
------------------------------------------
Driver Installation
-------------------
Use Intel 21143 compatible driver
---------------------------------
1. Turn on your notebook computer without the NETGEAR FA510 CardBus
card in the system. Wait until the system completes the entire
bootup sequence.
2. Insert the NETGEAR FA510 Fast Ethernet CardBus card into an
available CardBus slot in your notebook computer.
3. Since the MAC controller in the NETGEAR FA510 is an Intel 21143
compatible controller, Windows 2000 autotically installs the
"Intel 21143 Based PCI Fast Ethernet Adapter" driver for you.
4. Continue with the remaining steps of the installation. During
driver installation, you may need to provide additional information
(eg, computer and workgroup names) to properly add your system
into the network.
Use NETGEAR FA510 driver
------------------------
1. Turn on your notebook computer without the NETGEAR FA510 CardBus
card in the system. Wait until the system completes the entire
bootup sequence.
2. Insert the NETGEAR FA510 Fast Ethernet CardBus card into an
available CardBus slot in your notebook computer.
3. Since the MAC controller in the NETGEAR FA510 is an Intel 21143
compatible controller, Windows 2000 autotically installs the
"Intel 21143 Based PCI Fast Ethernet Adapter" driver for you.
4. Continue with the remaining steps of the installation. During
driver installation, you may need to provide additional information
(eg, computer and workgroup names) to properly add your system
into the network.
5. From the Windows 2000 desktop, click "Start" --> "Settings" -->
"Control Panel" --> "System".
6. Click "Hardware" --> "Device Mananger". All devices in the
system will be displayed.
7. Double-click on Network Adapters to show the "NE2000 Compatible"
network card.
8. Double-click on "NE2000 Compatible" network card to show the
adapter card properties.
9. Click on the "Driver" menu tab.
10. Click on the "Upgrade" button.
11. Select "Search for a suitable driver for my device (recommended)",
click Next to continue.
12. Insert the EA201 driver disk that contains EA201 driver.
13. Continue installation and select "Floppy Disk" when asked where
the driver for the network adapter card may reside.
14. Click on "Next" when "Digital Signature Not Found" dialogue box
appears.
15. Continue with the remaining steps of the installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.