\HELP\LINUX\LINUX.TXT NETGEAR FA510 Fast Ethernet PCI Adapter --------------------------------------- LINUX Driver Installation Overview ---------------------------------- Preamble -------- This software may be used and distributed according to the terms of the GNU Public License, incorporated herein by reference. This driver is for the Digital "Tulip" ethernet adapter interface. It should work with most DEC 21x4x-based chips/ethercards, as well as PNIC and MXIC chips. This program was originally written and maintained by Donald Becker who may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O Center of Excellence in Space Data and Information Sciences Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771. The program is further modified and customized for use in the Netgear FA510 series of Fast Ethernet PCI adapter cards. For customer support, please call your respective local Netgear technical support. Getting Started --------------- This installation guide describes the installation procedures of the two most popular versions of Linux: RedHat Linux 5.2 and Slackware Linux 3.6. With either Linux variation, you can install it into the Monolithic Kernel or the Modular Kernel. RedHat Linux 5.2 ---------------- The "Digital 21040 (Tulip)" driver included in the software can be used. The installation software in RedHat automatically detects and points to the proper driver. The latest Tulip driver can be downloaded from the following web site: http://cesdis.gsfc.nasa.gov/linux/drivers/tulip.html Installation Procedure for Modular Kernel ----------------------------------------- 1. During installation of Linux, make sure that the "C Development" selection is choosen under "Component to Install" window. This will copy the C compiler into the system for compiling the driver. 2. Also the Network Configuration window during installation, you will be asked if you want to configure LAN (not dailup) networking for your installed system. Answer YES. 3. Insert the floppy disk with the FA510 driver, and mount the disk into the system with the following command: mount -t msdos /dev/fd0 /mnt 4. Copy the Linux-related files from the disk into the system hard disk with the following command. Four files will be copies: "cctulip", "tulip.c", "Copying", and "linux.txt". cp /mnt/linux/*.* . 5. Compile tulip.c by executing the "cctulip" command at the prompt. The following command will be executed. gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c tulip.c 6. Find the names of the files in the /lib/modules directory. You might see the following directories. eg. "2.0.36-0.7" and "preferred". 7. Copy the newly compiled tulip.o into the latest kernel's modules. cp tulip.o /lib/modules/2.0.36-0.7/net/tulip.o 8. Reboot the system. 9. You can check if the driver is properly activating the card using the "dmesg" command right after system bootup. Installation Procedure for Monolithic Kernel -------------------------------------------- 1. cp tulip.c /usr/src/linux/drivers/net/tulip.c 2. /user/src/linux# make config set the following a. EISA, VLB, PCI and on board controllers (CONFIG_NET_EISA) [N/y/?] Y b. DECchip Tulip (dc21x4x) PCI support (CONFIG_DEC_ELCP) [N/y/m/?] Y 3. Rebuild and install new kernel and reboot. a. make dep b. make clean c. make zImage or make zlilo Slackware 3.6 ---------------- The latest original Tulip drive is also downloadable from the following web site: http://cesdis.gsfc.nasa.gov/linux/drivers/tulip.html Installation Procedure for Modular Kernel ----------------------------------------- Slackware automatically install the compiler into the system, there is no need to alter the default installation procedure to add additional components. 1. Insert the floppy disk with the FA510 driver, and mount the disk into the system with the following command: mount -t msdos /dev/fd0 /mnt 2. Copy the Linux drivers from the disk into the system hard disk with the following command. Four files will be copies: cctulip, tulip.c, Copying, linux.txt. cp /mnt/linux/*.* . 3. Compile tulip.c by executing the "cctulip" command at the prompt. The following command will be executed. gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c tulip.c 4. Find the names of the files in the /lib/modules directory. You might see the following directories. eg. "2.0.35" and "preferred". 5. Copy the newly compiled tulip.o into the latest kernel's modules. cp tulip.o /lib/modules/2.0.35/net/tulip.o 6. Edit the "rc.modules" file in the /etc/rc.d directory with the following command: vi /etc/rc.d/rc.modules 7. Search the following line: "# /sbin/modprobe tulip" 8. Remove the "#" character at the beginning of the line and save the file. " /sbin/modprobe tulip" 9. Update kernel's module dependencies with the following command: /sbin/depmod -a 10. Reboot the system. 11. You can check if the driver is properly activating the card using the "dmesg" command right after system bootup. Installation Procedure for Monolithic Kernel -------------------------------------------- 1. cp tulip.c /usr/src/linux/drivers/net/tulip.c 2. /user/src/linux# make config set the following a. EISA, VLB, PCI and on board controllers (CONFIG_NET_EISA) [N/y/?] Y b. DECchip Tulip (dc21x4x) PCI support (CONFIG_DEC_ELCP) [N/y/m/?] Y 3. Rebuild and install new kernel and reboot. a. make dep b. make clean c. make zImage or make zlilo NOTE: The latest testing version of the driver should compile with all 1.2.*, 1.3.* development tools, 2.0.* and 2.1.* kernels.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.