NDIS2DOS.TXT Driver File Contents (FA411v300.zip)

\HELP\NDIS2DOS\NDIS2DOS.TXT

                       NETGEAR FA411 PCMCIA Mobile Adapter
                      -------------------------------------
                        NDIS Driver Installation Overview
                        ---------------------------------
  Introduction
  ------------
  The included NDIS driver complies with the Microsoft's NDIS v2.0.1
  specification.  The following text files describe the installation
  procedure for some of the most popular operating systems
  supporting NDIS drivers:

    File            Description
    ------------    ---------------------------------------------
    LANTASTI.TXT    NDIS2 driver installation for LANtastic

    The operating systems listed above is just one of the network
    operating systems that support the NDIS driver.  In general, any
    system that uses the NDIS 2.0.1 driver is functionally compatible
    with the NDIS drivers included in the driver diskette.


  Configuration Parameters in PROTOCOL.INI for FA411.DOS
  -------------------------------------------------------
  When the FA411 NDIS2 for DOS driver, FA411.DOS, is loaded into
  LANtastic, the driver looks into the PROTOCOL.INI file for specific
  configuration requirement.  The keywords are optional and come with their
  respective default values.

          IOBASE - This keyword specifies the I/O base address used by
                   the adapter.  This value must match the actual address
                   setting on the adapter.  If this keyword is not
                   specified, the default value (0x300) will be put into
                   effect.

       INTERRUPT - This keyword specifies the interrupt line used by the
                   adapter.  This value must match the actual IRQ setting
                   on the adapter.  If this keyword is not specified, the
                   default value (3) will be put into effect.

      DRIVERNAME - This keyword specifies the driver name for the
                   adapter.


  CONNECTIONTYPE - This keyword specifies the connector that used by the
                   adapter.  The default value is NWAY.

                 = NWAY   : The adapter will automatically detect the
                                network speed and duplex mode.

                 = S100FD : Forces the UTP port to operate in 100BASE-TX
                                full-duplex mode.

                 = S100   : Forces the UTP port to operate in 100BASE-TX
                                half-duplex mode.

                 = S10FD  : Forces the UTP port to operate in 10BASE-T
                                full-duplex mode.

                 = S10    : Forces the UTP port to operate in 10BASE-T
                                half-duplex mode.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.36