1. ZEN1200A-01.zip Driver
2. LINUX.TXT File Contents

LINUX.TXT Driver File Contents (ZEN1200A-01.zip)

Realtek RTL8139C CardBus Fast Ethernet PC Card Installation on Linux
Test Environment: Red-Hat 7.0, KERNEL version is 2.2.17-14

*********  
    First you may download pcmcia-cs-3.1.15.tar.gz (If your PCMCIA version is newer
    than we said, you don't need to download it.) 
    { gzip -d pcmcia-cs-3.1.15.tar.gz
      tar xvf pcmcia-cs-3.1.15.tar     (on /usr/src/linux)      
      cd pcmcia-cs-3.1.15 (now pcmcia-cs-3.1.15 is directory)

      make config
      make all
      make install

      Above three "make" instructions, you MUST do it and then your PCMCIA service
      will work fine. 
    }  
********

1. Compile the source code :
 ->Copy the TAR file "cblinux.tar" to any directory (mcopy a:/linux/cblinux.tar .)
   and execute: tar xvf cblinux.tar
                ./cl8139 (chmod +x cl8139 to change its attribute)
   The directory "pcmcia-cs-3.1.15" stands for the card service version you 
   use. Please change it to the version on your system in order to include 
   proper .h file. The final file is realtek_cb.o

2. Copy driver :
 ->Copy the file "realtek_cb.o" to "/lib/modules/2.2.17-14/pcmcia" (see your kernel version)

3. Edit config:
 ->Add 5 lines to the file "/etc/pcmcia/config"
   
   #
   # Device driver definitions
   #
  
   device "realtek_cb"					 (==>Add 1/5)
     class "network" module "cb_enabler", "realtek_cb"   (==>Add 2/5) 


   :
   :

   #
   # CardBus Cards
   #

   card "Realtek RTL8139C CardBus Fast Ethernet PC Card" (==>Add 3/5)
     manfid 0x0000, 0x024C				 (==>Add 4/5)
     bind "realtek_cb"					 (==>Add 5/5)

   
   The values 0x0000, 0x024C are JEDEC ID and can be read by typing 
   "cardctl ident" on console with one card on socket.
	          
            
4. Edit linuxconf (Red Hat Linux)
   ->Type "linuxconf" and choose "Config"-->"Networking"-->"Client tasks"-->
   "Basic host information". 
   A. Select an Adapter, enable it (MANUAL item is to specify static IP and 
      DHCP item is to get Dynamic IP.)
   B. Type "realtek_cb" on "Kernel module". 
   C. Type "eth0" (or eth1, eth2) on "Net device". 
   (If you select MANUAL item, please set IP Address and Netmask.)
   D. Click on "Accept" button and "Act/change" button.


5. Reboot the computer.

6. After restart the computer, you can type "netstat -i" to see eth0 information.

7. You may go to http://www.scyld.com/network/rtl8139.html to see more information.