D-Link DFE-550TX 10/100 Adapter Packet Driver Installation for NCSA Getting Started --------------- The First Step : Loading driver via two methods : METHOD 1: --------- - If the DLH5X.SYS program is used, the following statement must be included in your CONFIG.SYS file: DEVICE = DLH5X.SYS [/option] <packet_int_no> See \PKTDRV\README.TXT for addition parameters You can place this line anywhere in the CONFIG.SYS file. METHOD 2: --------- - If the DLH5X.COM program is used, follow these steps: - Execute DLH5X.COM by typing: >DLH5X [/option] <packet_int_no> See \PKTDRV\README.TXT for addition parameters The Secondry Step: - First, you need to install NCSA TCP/IP distributions into your machines. See also NCSA TCP/IP distributions \INSTALL for detail informations. - Please set correct values in CONFIG.TEL which is included in NCSA TCP/IP distributions as followings: in CONFIG.TEL : : hardware = packet : : These values must the same as driver's parameters. - NCSA TCP/IP associated programs are ready to used See also NCSA TCP/IP distributions \INSTALL for detail informations Examples: > DLH5X.COM 0x62 > EDIT CONFIG.TEL : hardware = packet : > TELNET <IP_ADDRESS>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.