PCTCP.TXT Driver File Contents (fa41v200.exe)

\HELP\PKTDRV\PCTCP.TXT

                     NETGEAR FA410TX Fast Ethernet PC Card
                     -------------------------------------
                Packet Driver Installation for FTP Software PC/TCP
                --------------------------------------------------

  Installation Procedure
  ----------------------

        > FA410.COM [/option] <packet_int_no>

        <packet_int_no>      The software interrupt vector number used by
                             the packet driver program. This can be from
                             96 to 128.

        [/option]            Includes the following:

          /?                 Show available parameters

          /d                 Delay Initial - The driver program will not
                             initialize the network interface card until
                             the packet driver program is accessed by its
                             upper layer program.

          /w                 This parameter is only to be used in the
                             Windows environment.

          /u                 Unload the packet driver.

          /c                 Assign card number for driver.

          /n                 NetWare conversion. Convert 802.3 packets
                             to 8137 packets

          /auto              Auto detect the speed and duplex mode.

          /100f              Set speed to 100M bps and full duplex mode.

          /100h              Set speed to 100M bps and half duplex mode.

          /10f               Set speed to 10M bps and full duplex mode.

          /10h               Set speed to 10M bps and half duplex mode.


    Please refer to  the \HELP\PKTDRV\PKTDRV.TXT file and \HELP\INST_DOS.TXT
    file for more information.


  2. Run the ETHDRV.EXE and IDRIVE.EXE device driver programs.  These
     programs are provided by FTP.

     FTP's PC/TCP and its associated programs are ready to used.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.83