================================================================
ACCTON TECHNOLOGY CORPORATION
EN1203, EN1207(-TX/B-TX/C-TX) Series PCI-BUS (FAST) ETHERNET ADAPTER
WINDOWS NT 5.0 NDIS4 MINIPORT DRIVER INSTALLATION
Copyright 1995-1998 ACCTON Technology Corporation
All rights reserved.
================================================================
The driver (ACCPCI.SYS) contained in the directory WINNT is for
the following Accton PCI Ethernet adapters:
EtherDuo-PCI ( EN1203 )
Fast EtherCombo-TX PCI ( EN1207 )
Fast EtherPair-TX PCI ( EN1207-TX)
Cheetah ( EN1207B-TX/C-TX)
The driver (ACCPCI.SYS) conforms to the Network Driver Interface
Specification (NDIS) 4.0, and used with Microsoft Windows NT 5.0.
Contents:
---------
(A) Installing NDIS4 Miniport driver on Microsoft Windows NT 5.0
(B) Configuring NDIS4 Miniport driver on Microsoft Windows NT 5.0
(A) Installing NDIS4 Miniport driver on Microsoft Windows NT 5.0
=================================================================
1. Plug Accton's EN1207 Series adapter into one of the Master PCI
slots of your PCI platform.
2. Turn power ON then boot from Windows NT 5.0.
3. Windows NT 5.0 will prompt "PCI Ethernet Controller" in
"New Hardware Found" dialog box.
4. Select "Search for suitable driver for your device(Recommand)"
from "Found New Hardware Wizard" dialog box, then click "Next"
button.
5. Select "Specify a location" from "Found New Hardware Wizard"
dialog box, then click "Next" button.
6. Insert the Accton EN1207 Series Driver Diskette in your floppy drive.
7. Enter the driver pathname, i.e. A:\WINNT\WNT50 (or B:\WINNT\WNT50),
then click "OK" button from "Found New Hardware Wizard" dialog box.
8."Found New Hardware Wizard"dialog box will found inf file.
i.e. A:\WINNT\WNT50\NETACCP.INF ,then click "Next" button.
9. Windows NT 5.0 will prompt "Accton EN1207B-TX Series PCI Fast Ethernet
Adapter" in "Found New Hardware Wizard" dialog box,then click
"Finsh" button.
10. Windows NT 5.0 will prompt "New Connection" Wizard diag box
,then click "Next" button.
11. You can Modify or Add your LAN protocol or LAN Service...form "LAN
Wizard",and click "Next" button to continue.
12. Type a name you want for this connection form "LAN Wizard" diag box
,and click "Finsh" button.
13. Remove the Accton EN1207 Series Driver Diskette from your floppy drive.
14. Restart your computer to take effect the network function.
Trademarks:
Microsoft Windows NT 5.0 is a trademark of Microsoft Corporation.
===End of File===
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.