Windows 95 Introduction: ------------- This document describes the procedure to install Windows 95 driver for ISA Plug&Play ethernet adapter. Location of Driver: \WIN95\PNPW95.SYS Installing driver procedure on Microsoft Windows 95 : ----------------------------------------------------- Windows 95 is the operating system with Plug&Play feature. If you set the adapter in Plug&Play mode, Windows 95 will prompt you to install the adapter's driver when Windows 95 starts up. You can install driver either from this driver diskette or from Windows 95. The driver provided in this diskette is a specially designed turbo driver to speed up packet transmission and receiving. The performancce of our driver is better. It is strongly recommended to use the driver in this diskette for our Plug&Play adapter instead of any other NE2000 compatible drivers. Windows 95 will auto-detect your adapter configuration and set it. You don't need to set up the adapter configuration any more. If there are some ISA adapters as well as PnP adapters in your PC , your PC's BIOS perhaps connot auto-setup adapters' configuration correctly. The configuration of PnP adapters will pontentially conflict with ISA adapters'. You will be prompted to change the configuration of PnP adapters by Windows 95 if any configuration conflict occurs. You must set up your PnP adapters manually to prevent from the resource conflict. If you set the network card in jumpless or jumper mode, you must setup your driver as following procedure by manual. 1. When log into Windows 95, click on the "Start" icon ,then move the mouse to "Settings" icon and click on the "Control Panel". 2. In the Control Panel window, click on the "Network" icon. 3. In the Network Configuration dialog box, choose the "Add.." button. "Select Network Component Type" dialog box appears, and select "Adapter" icon. 4. You can select driver either from this diskette or from Windows 95. It is strongly recommended to use the driver in this didkette instead of any other NE2000 compatible drivers. 5. Then, you will see the prompt "Plug & Play Ethernet Adapter" in the Network Configuration dialog box, select it and then click on the "Properties" button. 6. In this dialog box, select "Resources ",the screen will come up with settings: IRQ and I/O address. Make sure the values that come up match the actual board settings. 7. Restart your system you will acquire network service.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.