LAN Manager Workstation/Server Introduction: ------------- This document describes the procedure to setup LAN Manager 2.1 Workstation/Server driver for ISA Plug&Play ethernet adapter. We provide two NDIS drivers. The PNPNDIS.DOS driver is a normal driver and PNPNDT.DOS is a turbo NDIS driver. It is highly recommended to use the turbo driver PNPNDT.DOS to improve network performance. Location of Driver:(DOS)\MSLANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.DOS :(DOS)\MSLANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDT.DOS (OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.OS2 Sample Configuration Files: --------------------------- CONFIG.SYS (for DOS will contain): DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS REM For Normal Driver DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.DOS REM or For Turbo Driver DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDT.DOS CONFIG.SYS (for OS/2 will contain): DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2 DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.OS2 PROTOCOL.INI (will contain): (For normal driver) [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "ISAPNP_NIF" LANABASE = 0 [ISAPNP_NIF] DriverName = PNPNDIS$ AdapterID = @0000B4123456 ; This item is only required when ; more than one ethernet adapters ; exist on one system. PROTOCOL.INI (will contain): (For turbo driver) [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "ISAPNPT_NIF" LANABASE = 0 [ISAPNPT_NIF] DriverName = PNPNDT$ AdapterID = @0000B4123456 ; This item is only required when ; more than one ethernet adapters ; exist on one system. Setup Procedures: ----------------- Before you start the installation process, make sure that the adapter is properly installed and configured. Make sure your Microsoft LAN Manager is properly installed. 1. Run the appropriate Microsoft Lan Manager SETUP for computer you are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration" item, (this driver isn't included on the Lan Manager disk) and insert this driver diskette, select the ISA PNP driver and follow the directions. 2. When completed, reboot your computer . NOTES: ------ 1. Parameters for the PROTOCOL.INI file: DRIVERNAME: This is the one required parameter. See example at top of this document for syntax. AdapterID : This keyword is provided by PNPNDIS, and is required when more than one ethernet adapters exist on one system. You must modify the AdapterID value in file, \LANMAN\PROTOCOL.INI, by yourself.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.