LAN Manager Workstation/Server
Introduction:
-------------
This document describes the procedure to setup LAN Manager 2.1
Workstation/Server driver for ISA Plug&Play ethernet adapter. We
provide two NDIS drivers. The PNPNDIS.DOS driver is a normal driver and
PNPNDT.DOS is a turbo NDIS driver. It is highly recommended to use the
turbo driver PNPNDT.DOS to improve network performance.
Location of Driver:(DOS)\MSLANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.DOS
:(DOS)\MSLANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDT.DOS
(OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.OS2
Sample Configuration Files:
---------------------------
CONFIG.SYS (for DOS will contain):
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
REM For Normal Driver
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.DOS
REM or For Turbo Driver
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\ISAPNP\PNPNDT.DOS
CONFIG.SYS (for OS/2 will contain):
DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\ISAPNP\PNPNDIS.OS2
PROTOCOL.INI (will contain): (For normal driver)
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "ISAPNP_NIF"
LANABASE = 0
[ISAPNP_NIF]
DriverName = PNPNDIS$
AdapterID = @0000B4123456 ; This item is only required when
; more than one ethernet adapters
; exist on one system.
PROTOCOL.INI (will contain): (For turbo driver)
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "ISAPNPT_NIF"
LANABASE = 0
[ISAPNPT_NIF]
DriverName = PNPNDT$
AdapterID = @0000B4123456 ; This item is only required when
; more than one ethernet adapters
; exist on one system.
Setup Procedures:
-----------------
Before you start the installation process, make sure that the
adapter is properly installed and configured. Make sure your
Microsoft LAN Manager is properly installed.
1. Run the appropriate Microsoft Lan Manager SETUP for computer you
are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
item, (this driver isn't included on the Lan Manager disk) and
insert this driver diskette, select the ISA PNP driver and follow
the directions.
2. When completed, reboot your computer .
NOTES:
------
1. Parameters for the PROTOCOL.INI file:
DRIVERNAME: This is the one required parameter. See example at top
of this document for syntax.
AdapterID : This keyword is provided by PNPNDIS, and is required
when more than one ethernet adapters exist on one
system. You must modify the AdapterID value in file,
\LANMAN\PROTOCOL.INI, by yourself.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.