; SETUPC.INF
;
; This is the Setup information file for the base
; components for the Windows retail product.
;
; Copyright 1993-1995, Microsoft Corporation
[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
SetupClass=BASE
[DestinationDirs]
; Destination directories for file-list sections,
; and associated pre-defined Logical Disk Identifiers (LDID).
;
; <file-list section> = <pre-defined LDID>[,<subdir>]
;
win.devices.files = 10 ; LDID_WIN
winboot.devices.files = 26 ; LDID_WINBOOT
win.devices.files.machine = 10 ;LDID_WIN
winother.files = 11 ; LDID_SYS
winother.files.shared = 25 ; LDID_SHARED
cmd.files = 13 ; LDID_CMD
msdbl.files = 13 ; LDID_CMD
sys.files = 11 ; LDID_SYS
ios.files = 12 ; LDID_IOS
ios.files.del = 12 ; LDID_IOS
boot.files = 30 ; LDID_BOOT
setup.files.inf = 17 ; LDID_INF
setup.files.win = 25 ; LDID_SHARED
setup.files.machine = 10 ; LDID_WIN
setup.files.sys = 11 ; LDID_SYS
betatools.files = 25 ; LDID_SHARED
betatools.delfiles = 25 ; LDID_SHARED
net.help.files = 18 ; LDID_HELP
ole.help.files = 18 ; LDID_HELP
printer.files.sys = 11 ; LDID_SYS
del.old.msdos.files = 34 ; LDID_OLD_DOS
ren.old.msdos.files = 34 ; LDID_OLD_DOS
del.premsdos5.files = 34 ; LDID_OLD_DOS
del.old.msdos.root = 30 ; LDID_BOOT (root of boot drive)
dxxspace.bat.files = 34 ; LDID_OLD_DOS
ren.dxxspace.utils = 34 ; LDID_OLD_DOS
del.dxxspace.utils = 34 ; LDID_OLD_DOS
base.help.files = 18 ; LDID_HELP
base.help.winhelp = 25 ; LDID_SHARED
base.help.sys = 11 ; LDID_SYS
VxD.Files = 22 ;LDID_VMM32
VxD.Del.Files = 11 ; LDID_SYS
del.oldwinboot = 32 ; LDID_OLD_WINBOOT ; Review: not needed in future products
del.cmd = 13 ; LDID_CMD
del.oldnet = 11 ; LDID_SYS
del.oldnet.win = 25 ; LDID_SHARED
del.win.reboot = 25 ; LDID_SHARED
del.bootroot = 30 ; LDID_BOOT ; Root dir of boot drive
NewWin.Shared = 25 ; LDID_SHARED
NewWin.Ren = 30 ; LDID_BOOT
un.copy = 13 ; LDID_CMD
[SetupNewWIN]
; Used to cleanup/do stuff when doing a new/clean installation
CopyFiles = NewWin.Shared
RenFiles = NewWin.Ren
DelReg = NewWin.DelReg, Temp.DelReg
AddReg = NewWin.AddReg
; Currently used to order sections in INI files similar to that in Win 3.1
UpdateInis = Setup.Init.Inis
[SetupUpgradeWIN]
; Used to cleanup/do stuff for an upgrade case
DelReg = Temp.DelReg
Ini2Reg = SUIni2RegSec
UpdateInis = SU.Update.Inis
[Temp.DelReg]
; Temp.DelReg is only for cleanup of keys from previous builds
[SetupNewDOS]
; This section will be installed if the user is doing new/clean install and
; the new DOS (CMD) dir is different from the prev. one.
; Use LDID 34 as the old dos dir.
; backup d??space utilities and replace w/ stub batch files
RenFiles = ren.dxxspace.utils
CopyFiles = dxxspace.bat.files
[SetupUpgradeDOS]
; Used to nuke files from their old DOS dir, if it is an upgrade and the
; new DOS(CMD) dir is different from prev. one, we GenInstall() this section.
; Use 34 as LDID for old dos dir (LDID_OLD_DOS) when adding DelFiles=
; delete d??space utilities and replace w/ stub batch files
; and delete ms-dos utils that are updated w/ Win 95 versions
CopyFiles = dxxspace.bat.files
DelFiles = del.old.msdos.files, del.dxxspace.utils, del.old.msdos.root
RenFiles = ren.old.msdos.files
[SetupCleanupOldDOS]
; Used to cleanup/do stuff when prev. DOS version < 5.0
DelFiles = del.premsdos5.files
[NewWin.DelReg]
; REVIEW: check this list and add/del as appropriate. Some of
; these branches that are removed are relevant only to interim releases
; where these obsolete keys were added. This might not be an issue for
; future products. Also, we might be able to move these to [SetupInit] section.
; Warning: if you del the HKLM,SOFTWARE\CLASSES branch, OLE 2 apps might not run
; and will have to be re-installed.
HKLM,SOFTWARE\FONTS
HKLM,SOFTWARE\PRODUCTS
HKLM,SOFTWARE\MICROSOFT\WINDOWS\4.0
HKLM,SYSTEM\CURRENTCONTROLSET\CONTROL
HKLM,SYSTEM\MEDIAEXTENSIONS
[NewWin.AddReg]
; Set default wallpaper to nothing for clean install:
; (runonce.exe sets the wallpaper to these values when it's done)
HKLM,%KEY_CURRENT%\Setup,"WallPaper",,""
HKLM,%KEY_CURRENT%\Setup,"TileWallpaper",,"0"
; Set color scheme to Windows Default for clean install:
HKCU,"Control Panel\Appearance",Current,,"%WINDOWS_DEFAULT%"
[NewWin.Shared]
dosprmpt.pif
[NewWin.Ren]
;rename win.bat in root if clean install
win_bat.bak,win.bat
[SetupBeforeReboot]
; This section is GenInstall-ed just before we update the root files, etc.
; This is the place where you can delete more stuff like C:\WINBOOT files,
; DBLSPACE.* if applicable, etc.
;
DelFiles = del.oldwinboot, del.cmd, del.oldnet, del.win.reboot, del.oldnet.win, del.bootroot
DelReg=del.oldnetreg
UpdateInis = msdos.sys.reboot.inis
[del.bootroot]
;These would be left over from a single-msdos-app mode session:
autoexec.app
autoexec.wos
config.app
config.wos
[del.oldwinboot]
; REVIEW: this section not needed in future products
ndishlp.sys
net.exe
net.msg
neth.msg
netstart.bak
netstart.bat
odihlp.exe
protman.dos
protman.exe
protocol.bak
protocol.ini
[del.cmd]
COMMAND.COM ; REVIEW: Not needed in future releases.
[del.oldnet]
am1500t.386
ee16.386
elnk3.386
elnkii.386
ibmtok.386
declan.386
ne1000.386
ne2000.386
nice.386
ubnei.386
elnk16.386
elnkmc.386
ne3200.386
pppmac.386
proteon.386
snip.386
wsock.386
wstcp.386
wsipx.386
vserver.386
nwserver.386
vredir.386
nwredir.386
ndis.386
ndis2sup.386
msodisup.386
filesec.386
mssp.386
nscl.386
nwlink.386
nwnblink.386
nwsp.386
nwsup.386
snapshot.386
nw416.dll
nwlogin3.exe
lscon.exe
vnetsup.386
vnetbios.386
netbeui.386
netcp.cpl
netlib32.dll
wfwnet.drv
[del.oldnet.win]
admincfg.exe
admincfg.adm
[del.oldnetreg]
HKLM,System\CurrentControlSet\Control\NetworkProvider\Order,SCRSAVE
[msdos.sys.reboot.inis]
;Add lines to msdos.sys to make it >1024B for compatibility w/ other apps.
;(Done right before we reboot)
%31%\msdos.sys,Options,,";"
%31%\msdos.sys,Options,,";The following lines are required for compatibility with other programs."
%31%\msdos.sys,Options,,";Do not remove them (MSDOS.SYS needs to be >1024 bytes)."
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxa"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxb"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxf"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxg"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxh"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxi"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxj"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxk"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxl"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxm"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxn"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxp"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxq"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxr"
%31%\msdos.sys,Options,,";xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxs"
[Setup.Init.Inis]
; THIS IS ONLY EXECUTED ON A CLEAN INSTALL
; Use a non-existent line spec. to delete from the INI files
; For Boot and 386Enh we use lines that need to be added anyway
;Create System.ini entries for Machine (only done for Clean Install--
;on an upgrade we leave whatever the user has installed in place)
system.ini,boot, ";DelMe"
system.ini, keyboard, ";DelMe"
system.ini, boot.description, ";DelMe"
system.ini,386Enh,,"ebios=*ebios"
wininit.ini, CombineVxDs,,"%22%\ebios.vxd=%11%\vmm32.vxd"
win.ini, windows, ";DelMe"
win.ini, Desktop, ";DelMe"
win.ini, intl, ";DelMe"
win.ini, fonts, ";DelMe"
win.ini, FontSubstitutes, ";DelMe"
win.ini, Compatibility, ";DelMe"
win.ini, Compatibility32, ";DelMe"
;make ghost entries in msdos.sys to get order of sections correct:
%31%\msdos.sys,Paths, ";DelMe"
%31%\msdos.sys,Options,,"BootMulti=1"
[SUIni2RegSec]
win.ini,windows,CursorBlinkRate,HKCU,"Control Panel\Desktop"
win.ini,windows,BorderWidth,HKCU,"Control Panel\Desktop"
win.ini,windows,ScreenSaveTimeOut,HKCU,"Control Panel\Desktop"
win.ini,windows,ScreenSaveActive,HKCU,"Control Panel\Desktop"
win.ini,windows,KeyboardSpeed,HKCU,"Control Panel\Keyboard"
win.ini,windows,KeyboardDelay,HKCU,"Control Panel\Keyboard"
win.ini,windows,Beep,HKCU,"Control Panel\Sound"
win.ini,windows,SwapMouseButtons,HKCU,"Control Panel\Mouse"
win.ini,windows,DoubleClickSpeed,HKCU,"Control Panel\Mouse"
win.ini,windows,MouseThreshold1,HKCU,"Control Panel\Mouse"
win.ini,windows,MouseThreshold2,HKCU,"Control Panel\Mouse"
win.ini,windows,MouseSpeed,HKCU,"Control Panel\Mouse"
win.ini,Colors,ActiveTitle,HKCU,"Control Panel\Colors"
win.ini,Colors,Background,HKCU,"Control Panel\Colors"
win.ini,Colors,Hilight,HKCU,"Control Panel\Colors"
win.ini,Colors,HilightText,HKCU,"Control Panel\Colors"
win.ini,Colors,TitleText,HKCU,"Control Panel\Colors"
win.ini,Colors,Window,HKCU,"Control Panel\Colors"
win.ini,Colors,WindowText,HKCU,"Control Panel\Colors"
win.ini,Desktop,TileWallpaper,HKCU,"Control Panel\Desktop"
win.ini,Desktop,Wallpaper,HKCU,"Control Panel\Desktop"
win.ini,Desktop,WallpaperStyle,HKCU,"Control Panel\Desktop"
win.ini,Desktop,GridGranularity,HKCU,"Control Panel\Desktop"
win.ini,Desktop,Pattern,HKCU,"Control Panel\Desktop"
win.ini,Desktop,IconTitleFaceName,HKCU,"Control Panel\Desktop",1
win.ini,Desktop,IconTitleSize,HKCU,"Control Panel\Desktop",1
win.ini,Desktop,IconTitleStyle,HKCU,"Control Panel\Desktop",1
win.ini,Desktop,IconTitleWrap,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,Desktop,IconSpacing,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,Desktop,IconVerticalSpacing,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,Extensions,,HKCU,"Software\Microsoft\Windows\CurrentVersion\Extensions"
win.ini,Intl,,HKCU,"Control Panel\International"
win.ini,WindowMetrics,MinWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,MinHorzGap,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,MinVertGap,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,MinArrange,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,BorderWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,ScrollWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,ScrollHeight,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,CaptionWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,CaptionHeight,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,SmCaptionWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,SmCaptionHeight,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,MenuWidth,HKCU,"Control Panel\Desktop\WindowMetrics"
win.ini,WindowMetrics,MenuHeight,HKCU,"Control Panel\Desktop\WindowMetrics"
;win.ini,Sounds,,HKCU,"AppEvents\Schemes\OldScheme" ; unnecessary
; store away initial wallpaper (so Setup can switch it after runonce):
; the 2 flag leaves the .ini line in tact and replaces the reg key if it already exists
win.ini,Desktop,Wallpaper,HKLM,Software\Microsoft\Windows\CurrentVersion\Setup,2
win.ini,Desktop,TileWallpaper,HKLM,Software\Microsoft\Windows\CurrentVersion\Setup,2
[SU.Update.Inis]
; copy over standard screen savers
system.ini,boot,"scrnsave.exe=%25%\bezier.scr","scrnsave.exe=%11%\%BEZIER%.scr",1
system.ini,boot,"scrnsave.exe=%25%\ssmarque.scr","scrnsave.exe=%11%\%SSMARQUE%.scr",1
system.ini,boot,"scrnsave.exe=%25%\ssmyst.scr","scrnsave.exe=%11%\%SSMYST%.scr",1
system.ini,boot,"scrnsave.exe=%25%\scrnsave.scr","scrnsave.exe=%11%\%SCRNSAVE%.scr",1
system.ini,boot,"scrnsave.exe=%25%\ssflywin.scr","scrnsave.exe=%11%\%SSFLYWIN%.scr",1
system.ini,boot,"scrnsave.exe=%25%\ssstars.scr","scrnsave.exe=%11%\%SSSTARS%.scr",1
;make ghost entries in msdos.sys to get order of sections correct:
%31%\msdos.sys,Paths, ";DelMe"
%31%\msdos.sys,Options, ";DelMe"
[BaseWinOptions]
winbase
winapps
command
setup
basehelp
printer
[winbase]
OptionDesc = %WINBASE%
CopyFiles = sys.files, ios.files, VxD.Files
DelFiles = VxD.Del.Files, ios.files.del
UpdateInis = winbase.inis
UpdateIniFields = winbase.inifields
AddReg = winbase.reg
DelReg = winbase.del.reg
[winapps]
CopyFiles = winother.files.shared, winother.files, betatools.files
DelFiles = betatools.delfiles
UpdateInis = betatools.inis, winother.links
AddReg = betatools.addreg
[command]
CopyFiles = boot.files, cmd.files, win.devices.files, winboot.devices.files, win.devices.files.machine
UpdateCfgSys = config_default
UpdateAutoBat= autoexec_default
[setup]
CopyFiles = setup.files.win,setup.files.machine,setup.files.sys,setup.files.inf
[basehelp]
CopyFiles = net.help.files, ole.help.files, base.help.files, base.help.winhelp, base.help.sys
[printer]
OptionDesc = %PRINTER%
CopyFiles = printer.files.sys
UpdateInis = printer.inis
[winbase.inis]
;Additions go here:
system.ini,boot,,"user.exe=user.exe"
system.ini,boot,,"gdi.exe=gdi.exe"
system.ini,boot,,"sound.drv=mmsound.drv"
system.ini,boot,,"dibeng.drv=dibeng.dll"
system.ini,386Enh,,"device=*vshare"
system.ini,386Enh,,"device=*dynapage"
win.ini,Pscript.Drv,,"ATMWorkaround=1"
; Set COMM.DRV unless preserving a known win3.1 driver
system.ini,boot,"comm.drv=*vcoscomm.drv","~CommDrvTemp~=*",3
system.ini,boot,"comm.drv=*r0dmdcom.drv", "~CommDrvTemp~=*",3
system.ini,boot,,"comm.drv=comm.drv"
system.ini,boot,"~CommDrvTemp~=*","comm.drv=*",3
wininit.ini, CombineVxDs,,"%22%\vshare.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vwin32.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vfbackup.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vcomm.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\combuff.vxd=%11%\vmm32.vxd"
; Set *VCD unless preserving a known win3.1 VCD
system.ini,386Enh,"device=*r0dmdvcd.386","~VCDTemp~=*",3
system.ini,386Enh,,"device=*vcd"
system.ini,386Enh,"~VCDTemp~=*","device=*vcd",3
wininit.ini, CombineVxDs,,"%22%\vcd.vxd=%11%\vmm32.vxd"
system.ini,386Enh,,"device=*vpd"
wininit.ini, CombineVxDs,,"%22%\vpd.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\ifsmgr.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\ios.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\spooler.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vfat.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vcache.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vcond.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vcdfsd.vxd=%11%\vmm32.vxd"
; Install "device=*int13"
system.ini, 386Enh,, "device=*int13"
wininit.ini, CombineVxDs,,"%22%\int13.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vxdldr.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vdef.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\dynapage.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\configmg.vxd=%11%\vmm32.vxd"
; Always combine EBIOS.VxD, but only add the device= line on clean installs
; (see the [Setup.Init.Inis] section)
wininit.ini, CombineVxDs,,"%22%\ebios.vxd=%11%\vmm32.vxd"
; Always combine vmd.vxd--it solves problems w/ older setup programs:
wininit.ini, CombineVxDs,,"%22%\vmd.vxd=%11%\vmm32.vxd"
;REVIEW This should really be done by Net setup--they should pick
;it up once they convert to the new VxD naming conventions:
wininit.ini, CombineVxDs,,"%22%\dosnet.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vpicd.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vtd.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\reboot.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vdmad.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vsd.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\v86mmgr.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\pageswap.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\dosmgr.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vmpoll.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\shell.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\parity.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\biosxlat.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vmcpd.vxd=%11%\vmm32.vxd"
wininit.ini, CombineVxDs,,"%22%\vtdapi.vxd=%11%\vmm32.vxd"
system.ini,386Enh,,"maxbps=270"
wininit.ini, CombineVxDs,,"%22%\perf.vxd=%11%\vmm32.vxd"
;Keep some things in the extensions section for compatibility with cc-Mail
win.ini,Extensions,,"txt=notepad.exe ^.txt"
;win.ini,Extensions,,"bmp=mspaint.exe ^.bmp" ; moved to applets.inx
;Create StartUp Folder and modify links in it:
setup.ini, progman.groups,, "group1=""%StartUp_DESC%""" ;creates folder
setup.ini, group1,, """%PenPal_DESC%""" ;deletes existing link from StartUp folder
;Create Links that will show up in the Programs Folder (Not in a sub-folder)
;This replaces the old 'Main' folder/group:
setup.ini, progman.groups,, "group0=" ;creates "null" folder
setup.ini, group0,, """%Explorer_DESC%""" ;REVIEW: deletes previous link (name oblsolete) not needed for final product
setup.ini, group0,, """%WinExplorer_DESC%"", ""Explorer.exe /n,/e,%30%"", EXPLORER.EXE, 1,,,%WinExplorer_ShortDESC%"
setup.ini, group0,, """%MSDOSPrmpt_DESC%""" ;delete the old link
setup.ini, group0,, """%MSDOSPrmpt_ShortDESC%""" ;delete the old link
setup.ini, group0,, """%MSDOSPrmpt_DESC%"", command.com, PIFMGR.DLL, 0,,%10%,%MSDOSPrmpt_ShortDESC%" ;add new link
;Stuff items into Program Manager for access to printer/control panel/Explorer, Etc.
; Also used if user selects Win 3.1 User Interface Option
setup.ini, progman.only,,"PMGroup3=%MAIN_DESC%" ; creates group
setup.ini, PMGroup3,,"""%Printers_DESC%"",""rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder"",shell32.dll,37
setup.ini, PMGroup3,,"""%CPanel_DESC%"",control.exe,shell32.dll,35
setup.ini, PMGroup3,,"""%WinExplorer_DESC%"", ""Explorer.exe /n,/e,%30%"", EXPLORER.EXE, 1"
setup.ini, PMGroup3,,"""%MSDOSPrmpt_DESC%""" ;delete the old link
setup.ini, PMGroup3,,"""%MSDOSPrmpt_DESC%"", command.com, PIFMGR.DLL, 0" ;add new link
setup.ini, PMGroup3,,"""%Fileman_DESC%"", WINFILE.EXE"
; And delete "Printers" and Explorer from MAIN group so it doesn't show up on Start Menu on subsequent installs:
setup.ini, progman.groups,, "group3=%MAIN_DESC%" ;creates folder
setup.ini, group3,, """%Printers_DESC%""" ;deletes link
setup.ini, group3,, """%WinExplorer_DESC%""" ;deletes link
setup.ini, group3,, """%CPanel_DESC%""" ;deletes link
;Turn on bootgui in msdos.sys (formerly winboot.ini) always.
%31%\msdos.sys,Options,,"BootGUI=1"
;fixes registry/win.ini sync probs:
win.ini,Desktop,"WallpaperOriginX=*"
win.ini,Desktop,"WallpaperOriginY=*"
[winbase.inifields]
system.ini, NonWindowsApp, localtsrs,dosedit
system.ini, NonWindowsApp, localtsrs,ced
system.ini, NonWindowsApp, localtsrs,pced
; REVIEW: the foll. will also nuke field like fooatikey.exe!
win.ini, windows, load,*atikey.exe,,1
; Remove Compaq PnP support (replaced w/ built-in Win 95 PnP)
win.ini, windows, load,*cpqevent.exe,,1
win.ini, windows, run,*cpqevent.exe,,1
; Remove Toshiba's maxtime utility which trashes the tray's buttons
win.ini, windows, load,*maxtime.exe,,1
win.ini, windows, run,*maxtime.exe,,1
; Remove plugin a common shareware shell extension
win.ini, windows, load,*plugin.exe,,1
win.ini, windows, run,*plugin.exe,,1
; Remove iconhearit which was shipped free to some people
win.ini, windows, load,*ihearit.exe,,1
win.ini, windows, run,*ihearit.exe,,1
[winbase.reg]
;Media content directory
HKLM,%KEY_CURRENT%,MediaPath,,"%25%\%media_dir%"
;Local machine, non-user specific configurations
HKLM,%KEY_CURRENT%,ConfigPath,,"%10%\config"
;Setup root directory for winboot.sys
HKLM,%KEY_CURRENT%,SystemRoot,,%10%
;Keep track of the previous windows dir
HKLM,%KEY_CURRENT%,OldWinDir,,"%33%"
; Mark setuplog.txt, setuplog.old, msdos.--- w/ the HIDDEN attrib on first boot:
; (Note that you need to use CAPS so the filesystem doesn't treat is as a LFN)
; R=1; H=2; S=4; HR=3; HS=6; SHR=7
HKLM,%KEY_RENAME%\Boot,,,%30%
HKLM,%KEY_RENAME%\Boot,SETUPLOG.TXT,,"SETUPLOG.TXT,2"
HKLM,%KEY_RENAME%\Boot,SETUPLOG.OLD,,"SETUPLOG.OLD,2"
HKLM,%KEY_RENAME%\Boot,"MSDOS.---",,"MSDOS.---,2"
; Add location of Product and other info for Registration Wizard
HKLM,%KEY_CURRENT%,ProductName,,"%ProductName%"
; Mark MFC 3.01 DLL's as read only so MSVC 2.00 setup doesn't overwrite them with 3.00 versions
;HKLM,%KEY_RENAME%\Sys,,,%11%
;HKLM,%KEY_RENAME%\Sys,MFC30.DLL,,"MFC30.DLL,1"
;HKLM,%KEY_RENAME%\Sys,MFCANS32.DLL,,"MFCANS32.DLL,1"
;HKLM,%KEY_RENAME%\Sys,MFCUIA32.DLL,,"MFCUIA32.DLL,1"
;HKLM,%KEY_RENAME%\Sys,MFCO30.DLL,,"MFCO30.DLL,1"
;HKLM,%KEY_RENAME%\Sys,MFCD30.DLL,,"MFCD30.DLL,1"
;HKLM,%KEY_RENAME%\Sys,MFCN30.DLL,,"MFCN30.DLL,1"
; Set policies update mode for policy downloader
HKLM,System\CurrentControlSet\Control\Update,UpdateMode,3,01
;Sets CONFIGMG default values
HKLM,%KEY_CFGMGR%,StaticVxD,,"*CONFIGMG"
HKLM,%KEY_CFGMGR%,Start,1,00
HKLM,%KEY_CFGMGR%,SysDM,,"SYSDM.CPL"
HKLM,%KEY_CFGMGR%,SysDMFunc,,"DMSetupDevnode"
HKLM,%KEY_CFGMGR%,Detect,,"SYSDM.CPL"
HKLM,%KEY_CFGMGR%,DetectFunc,,"DMRedetect"
HKLM,%KEY_CFGMGR%,Private,,"SYSDM.CPL"
HKLM,%KEY_CFGMGR%,PrivateFunc,,"DMPrivateProblem"
;Sets VSHARE default values
HKLM,%KEY_SVCSVXD%\VSHARE,StaticVxD,,"*VSHARE"
HKLM,%KEY_SVCSVXD%\VSHARE,Start,1,00
;Sets VWIN32 default values
HKLM,%KEY_SVCSVXD%\VWIN32,StaticVxD,,"*VWIN32"
HKLM,%KEY_SVCSVXD%\VWIN32,Start,1,00
;Sets VFBACKUP default values
HKLM,%KEY_SVCSVXD%\VFBACKUP,StaticVxD,,"*VFBACKUP"
HKLM,%KEY_SVCSVXD%\VFBACKUP,Start,1,00
;Sets VCOMM default values
HKLM,%KEY_SVCSVXD%\VCOMM,StaticVxD,,"*VCOMM"
HKLM,%KEY_SVCSVXD%\VCOMM,Start,1,00
;Sets COMBUFF default values
HKLM,%KEY_SVCSVXD%\COMBUFF,StaticVxD,,"*COMBUFF"
HKLM,%KEY_SVCSVXD%\COMBUFF,Start,1,00
;Sets IFSMGR default values
HKLM,%KEY_SVCSVXD%\IFSMGR,StaticVxD,,"*IFSMGR"
HKLM,%KEY_SVCSVXD%\IFSMGR,Start,1,00
;Sets IOS default values
HKLM,%KEY_SVCSVXD%\IOS,StaticVxD,,"*IOS"
HKLM,%KEY_SVCSVXD%\IOS,Start,1,00
;Sets SPOOLER default values
HKLM,%KEY_SVCSVXD%\SPOOLER,StaticVxD,,"*SPOOLER"
HKLM,%KEY_SVCSVXD%\SPOOLER,Start,1,00
;Sets VFAT default values
HKLM,%KEY_SVCSVXD%\VFAT,StaticVxD,,"*VFAT"
HKLM,%KEY_SVCSVXD%\VFAT,Start,1,00
;Sets VCACHE default values
HKLM,%KEY_SVCSVXD%\VCACHE,StaticVxD,,"*VCACHE"
HKLM,%KEY_SVCSVXD%\VCACHE,Start,1,00
;Sets VCOND default values
HKLM,%KEY_SVCSVXD%\VCOND,StaticVxD,,"*VCOND"
HKLM,%KEY_SVCSVXD%\VCOND,Start,1,00
;Sets VCDFSD default values
HKLM,%KEY_SVCSVXD%\VCDFSD,StaticVxD,,"*VCDFSD"
HKLM,%KEY_SVCSVXD%\VCDFSD,Start,1,00
;Sets VXDLDR default values
HKLM,%KEY_SVCSVXD%\VXDLDR,StaticVxD,,"*VXDLDR"
HKLM,%KEY_SVCSVXD%\VXDLDR,Start,1,00
;Sets VDEF default values
HKLM,%KEY_SVCSVXD%\VDEF,StaticVxD,,"*VDEF"
HKLM,%KEY_SVCSVXD%\VDEF,Start,1,00
;Sets VPICD default values
HKLM,%KEY_SVCSVXD%\VPICD,StaticVxD,,"*VPICD"
HKLM,%KEY_SVCSVXD%\VPICD,Start,1,00
;Sets VTD default values
HKLM,%KEY_SVCSVXD%\VTD,StaticVxD,,"*VTD"
HKLM,%KEY_SVCSVXD%\VTD,Start,1,00
;Sets REBOOT default values
HKLM,%KEY_SVCSVXD%\REBOOT,StaticVxD,,"*REBOOT"
HKLM,%KEY_SVCSVXD%\REBOOT,Start,1,00
;Sets VDMAD default values
HKLM,%KEY_SVCSVXD%\VDMAD,StaticVxD,,"*VDMAD"
HKLM,%KEY_SVCSVXD%\VDMAD,Start,1,00
;Sets VSD default values
HKLM,%KEY_SVCSVXD%\VSD,StaticVxD,,"*VSD"
HKLM,%KEY_SVCSVXD%\VSD,Start,1,00
;Sets V86MMGR default values
HKLM,%KEY_SVCSVXD%\V86MMGR,StaticVxD,,"*V86MMGR"
HKLM,%KEY_SVCSVXD%\V86MMGR,Start,1,00
;Sets PAGESWAP default values
HKLM,%KEY_SVCSVXD%\PAGESWAP,StaticVxD,,"*PAGESWAP"
HKLM,%KEY_SVCSVXD%\PAGESWAP,Start,1,00
;Sets DOSMGR default values
HKLM,%KEY_SVCSVXD%\DOSMGR,StaticVxD,,"*DOSMGR"
HKLM,%KEY_SVCSVXD%\DOSMGR,Start,1,00
;Sets VMPOLL default values
HKLM,%KEY_SVCSVXD%\VMPOLL,StaticVxD,,"*VMPOLL"
HKLM,%KEY_SVCSVXD%\VMPOLL,Start,1,00
;Sets SHELL default values
HKLM,%KEY_SVCSVXD%\SHELL,StaticVxD,,"*SHELL"
HKLM,%KEY_SVCSVXD%\SHELL,Start,1,00
;Sets PARITY default values
HKLM,%KEY_SVCSVXD%\PARITY,StaticVxD,,"*PARITY"
HKLM,%KEY_SVCSVXD%\PARITY,Start,1,00
;Sets BIOSXLAT default values
HKLM,%KEY_SVCSVXD%\BIOSXLAT,StaticVxD,,"*BIOSXLAT"
HKLM,%KEY_SVCSVXD%\BIOSXLAT,Start,1,00
;Sets VMCPD default values
HKLM,%KEY_SVCSVXD%\VMCPD,StaticVxD,,"*VMCPD"
HKLM,%KEY_SVCSVXD%\VMCPD,Start,1,00
;Sets VTDAPI default values
HKLM,%KEY_SVCSVXD%\VTDAPI,StaticVxD,,"*VTDAPI"
HKLM,%KEY_SVCSVXD%\VTDAPI,Start,1,00
;Sets PERF default values
HKLM,%KEY_SVCSVXD%\PERF,StaticVxD,,"*PERF"
HKLM,%KEY_SVCSVXD%\PERF,Start,1,00
; Run once entry to launch RunOnce wrapper
; WARNING: Do not change this Key or Value without talking to Program Mgmt first.
HKLM,%KEY_RUNONCE%,Wrapper,,"runonce.exe"
; Run once wrapper entry to fill caches with control panel info:
HKLM, %KEY_RUNONCE%\Setup,"%CplInit_Desc%",,"RUNDLL32.EXE SHELL32.DLL,Control_FillCache_RunDLL"
; Run Once Wrapper entry to run Group converter:
HKLM,%KEY_RUNONCE%\Setup,"%Grpconv_Desc%",,"%25%\grpconv.exe -s"
; Run Once Wrapper entry to run winhelp initialization:
HKLM,%KEY_RUNONCE%\Setup,"%HelpInit_Desc%",,"%25%\winhlp32.exe -g windows.hlp"
; Run once wrapper entry to copy entries from apps.inf to the registry
HKLM, %KEY_RUNONCE%\Setup,"%ConfigMSDOS_Desc%",,"RUNDLL.EXE PIFMGR.DLL,InitPIFRegEntries"
; Run once wrapper entry to run time zone control panel:
;HKLM, %KEY_RUNONCE%\Setup,"%SetTimeZone_Desc%",,"RUNDLL32.EXE SHELL32.DLL,Control_RunDLL TIMEDATE.CPL,,/f"
; Run once entry for DMFirstTimeSetup
HKLM,%KEY_RUNONCE%,ClassSetup,,"rundll.exe sysdm.cpl,DMFirstTimeSetup"
; Set Wallpaper that comes up during runonce (this gets replaced by user's orig. wallpaper after runonce is done)
HKCU,"Control Panel\Desktop","Wallpaper",,"%25%\setup.bmp"
HKCU,"Control Panel\Desktop","TileWallpaper",,0
HKLM,%KEY_RENAME%\Win,,,%25%
HKLM,%KEY_RENAME%\Win,setup.bmp,,"%SETUP_BMP%.bmp"
; Fill in the list of VMM32 combined files
HKLM,%KEY_VMM32FILES%,vshare.vxd,1,
HKLM,%KEY_VMM32FILES%,vwin32.vxd,1,
HKLM,%KEY_VMM32FILES%,vfbackup.vxd,1,
HKLM,%KEY_VMM32FILES%,vcomm.vxd,1,
HKLM,%KEY_VMM32FILES%,combuff.vxd,1,
HKLM,%KEY_VMM32FILES%,vcd.vxd,1,
HKLM,%KEY_VMM32FILES%,vpd.vxd,1,
HKLM,%KEY_VMM32FILES%,ifsmgr.vxd,1,
HKLM,%KEY_VMM32FILES%,ios.vxd,1,
HKLM,%KEY_VMM32FILES%,spooler.vxd,1,
HKLM,%KEY_VMM32FILES%,vfat.vxd,1,
HKLM,%KEY_VMM32FILES%,vcache.vxd,1,
HKLM,%KEY_VMM32FILES%,vcond.vxd,1,
HKLM,%KEY_VMM32FILES%,vcdfsd.vxd,1,
HKLM,%KEY_VMM32FILES%,int13.vxd,1,
HKLM,%KEY_VMM32FILES%,vxdldr.vxd,1,
HKLM,%KEY_VMM32FILES%,vdef.vxd,1,
HKLM,%KEY_VMM32FILES%,dynapage.vxd,1,
HKLM,%KEY_VMM32FILES%,configmg.vxd,1,
HKLM,%KEY_VMM32FILES%,ebios.vxd,1,
HKLM,%KEY_VMM32FILES%,vmd.vxd,1,
HKLM,%KEY_VMM32FILES%,dosnet.vxd,1,
HKLM,%KEY_VMM32FILES%,vpicd.vxd,1,
HKLM,%KEY_VMM32FILES%,vtd.vxd,1,
HKLM,%KEY_VMM32FILES%,reboot.vxd,1,
HKLM,%KEY_VMM32FILES%,vdmad.vxd,1,
HKLM,%KEY_VMM32FILES%,vsd.vxd,1,
HKLM,%KEY_VMM32FILES%,v86mmgr.vxd,1,
HKLM,%KEY_VMM32FILES%,pageswap.vxd,1,
HKLM,%KEY_VMM32FILES%,dosmgr.vxd,1,
HKLM,%KEY_VMM32FILES%,vmpoll.vxd,1,
HKLM,%KEY_VMM32FILES%,shell.vxd,1,
HKLM,%KEY_VMM32FILES%,parity.vxd,1,
HKLM,%KEY_VMM32FILES%,biosxlat.vxd,1,
HKLM,%KEY_VMM32FILES%,vmcpd.vxd,1,
HKLM,%KEY_VMM32FILES%,vtdapi.vxd,1,
HKLM,%KEY_VMM32FILES%,perf.vxd,1,
; Add precopied files to the installed files list, since they are
; pre-installed files
HKLM,%KEY_INSTALLED%,ncrc710.mpd,1,
HKLM,%KEY_INSTALLED%,ncrc810.mpd,1,
HKLM,%KEY_INSTALLED%,amsint.mpd,1,
HKLM,%KEY_INSTALLED%,aic78xx.mpd,1,
HKLM,%KEY_INSTALLED%,pci.vxd,1,
HKLM,%KEY_INSTALLED%,isapnp.vxd,1,
HKLM,%KEY_INSTALLED%,eisa.vxd,1,
[winbase.del.reg]
HKCU,"Control Panel\Desktop","WallpaperOriginX"
HKCU,"Control Panel\Desktop","WallpaperOriginY"
[boot.files]
command.new, command.com,,1
sulogo.sys,,,1
winboot.new, winboot.sys,,1
[sys.files]
advapi32.dll,,,8
comdlg32.dll,,,8
comm.drv
commctrl.dll, kommctrl.dll, kommctrl.dll
crtdll.dll,,,8
dibeng.dll
eisa.vxd,,,1
gdi.exe,,,1
gdi32.dll,,,9
iosclass.dll
isapnp.vxd,,,1
conagent.exe
imm32.dll
isapnp.vxd,,,1
kernel32.dll,,,9
krnl386.exe,,,1
lpt.vxd,,,1
lptenum.vxd,,,1
lz32.dll,,,8
lzexpand.dll
mf3216.dll
mfc30.dll
mkcompat.exe
msgsrv32.exe,,,8
msshrui.dll
msvcrt20.dll
ntdll.dll
olecli32.dll,,,8
olesvr32.dll,,,8
pci.vxd,,,1
pkpd.dll
pkpd32.dll
redirect.mod
serial.vxd,,,1
serenum.vxd,,,1
setup4.dll,,,1
mmsound.drv
sysclass.dll,,,1
systhunk.dll,,,1
unicode.bin
user.exe,,,1
user32.dll,,,9
vdmdbg.dll
vfd.vxd,,,1
ver.dll,ver.new,,8
version.dll
vmm32.vxd,,,1
win32s16.dll
winaspi.dll
winoa386.mod,winoa386.new
wnaspi32.dll
wow32.dll
[VxD.Files]
;Copy these to the \system\vmm32 dir to be bound into VMM32.VxD:
biosxlat.vxd,,,1
combuff.vxd,,,1
configmg.vxd,,,1
dosmgr.vxd,,,1
ebios.vxd,,,1
pageswap.vxd,,,1
parity.vxd,,,1
reboot.vxd,,,1
shell.vxd,,,1
v86mmgr.vxd,,,1
vcd.vxd,,,1
vpd.vxd,,,1
vdmad.vxd,,,1
vmcpd.vxd,,,1
vmpoll.vxd,,,1
vpicd.vxd,,,1
vshare.vxd,,,1
vsd.vxd,,,1
vtd.vxd,,,1
vtdapi.vxd,,,1
vwin32.vxd,,,1
vfbackup.vxd,,,1
vcomm.vxd,,,1
ifsmgr.vxd,,,1
ios.vxd,,,1
spooler.vxd,,,1
vfat.vxd,,,1
vcache.vxd,,,1
vcond.vxd,,,1
vcdfsd.vxd,,,1
int13.vxd,,,1
vxdldr.vxd,,,1
vdef.vxd,,,1
dynapage.vxd,,,1
perf.vxd,,,1
vmd.vxd
dosnet.vxd,,,1 ;REVIEW this should be handled by Net setup when they adopt the new vxd stuff
qemmfix.vxd ;Not bound into VMM32.VxD, but should always be there
[VxD.Del.Files]
;Delete these from the system dir since they are now replaced w/ .vxd files
vshare.vxd
biosxlat.386
combuff.386
configmg.386
dos386.exe
dosmgr.386
ebios.386
pageswap.386
parity.386
reboot.386
shell.386
v86mmgr.386
vcd.386
vpd.386
vdmad.386
vmcpd.386
vmpoll.386
vpicd.386
vsd.386
vtd.386
vtdapi.386
vwin32.386
vfbackup.386
vcomm.386
ifsmgr.386
ios.386
spooler.386
vfat.386
vcache.386
vcond.386
vcdfsd.386
int13.386
vxdldr.386
vdef.386
dynapage.386
perf.386
lpt.386
lptenum.386
pagefile.386
pagefile.vxd
peloader.386
serial.386
vfd.386
vshare.386
isapnp.386
dosnet.386
[winboot.devices.files]
aspi2hlp.sys,,,1
CMD640X.SYS
CMD640X2.SYS
dblbuff.sys
setver.win,setver.exe
ifshlp.sys,,,1
himem.sys,,,1
[win.devices.files]
emm386.exe
ramdrive.sys
smartdrv.exe
[win.devices.files.machine]
ios.ini
win.com, win.cnf,,1
; these go in %25%
;winbug.dat
;winbug.exe
;winbug.hlp
;winbug10.dll
[betatools.files]
skjerm.txt
generelt.txt
internet.txt
nettverk.txt
skrivere.txt
mouse.txt
msn.txt
viktig.txt
support.txt
winnews.txt
spmsvar.txt
maskvare.txt
exchange.txt
tips.txt
program.txt
config.txt
msdosdrv.txt
[betatools.delfiles]
relnotes.rtf
[betatools.addreg]
HKLM,%KEY_RENAME%\Win,,,%25%
HKLM,%KEY_DEL%\Win,,,%25%
HKLM,%KEY_RENAME%\Win,%Readme_Loc%.txt,,$!$!$w95.txt
HKLM,%KEY_RENAME%\Win,viktig.txt,,"%Readme%.txt"
HKLM,%KEY_DEL%\Win,$!$!$w95.txt,,$!$!$w95.txt
[betatools.inis]
setup.ini, progman.groups,, "groupDelDoc2=..\Programs\Documents"
setup.ini, groupDelDoc2,,"""Readme"""
setup.ini, progman.groups,, "groupDelDoc3=..\Programs"
setup.ini, groupDelDoc3,,"""Clean Item!"""
setup.ini, progman.groups,, "groupDelDoc=..\%ProgramsFolder%\%DOC_GRP%"
setup.ini, progman.groups,, "groupDoc=%DOC_GRP%"
setup.ini, groupDelDoc,,"""%Readme%"""
setup.ini, groupDoc,,"""readme"",""%25%\%Readme%.txt"""
[winother.files]
APPWIZ.CPL
commdlg.dll, commdlg.new,,8
ddeml.dll
deskcp16.dll
DSKMAINT.DLL,,,32 ;32 flag suppresses ver conflict dlg
main.cpl
maincp16.dll
timedate.cpl
mspcic.dll
desk.cpl
olecli.dll
olesvr.dll
pifmgr.dll
runonce.exe
sysdm.cpl
sysedit.exe
toolhelp.dll
win87em.dll
sage.dll
[winother.files.shared]
notepad.exe
SCANDSKW.EXE,,,32 ;32 flag suppresses version conflict dlg
[winother.links]
;create link to NotePad:
setup.ini, progman.groups,, "group4=%APPS_DESC%" ;creates folder
setup.ini, group4,, """%Notepad_DESC%"", NOTEPAD.EXE" ;creates link
;create link to ScanDisk (for Windows):
setup.ini, progman.groups,, "group11=%SYSTOOLS_DESC%" ;creates folder
setup.ini, group11,, """%Fixdrive_Desc%"", SCANDSKW.EXE"
[cmd.files]
; NOTE: If you add/remove any files from this section, make sure you do the same
; to the [del.win.reboot] section right below it, and that you check to
; see if they should be deleted in the [del.old.msdos.files] section as well.
ansi.sys
attrib.exe
chkdsk.exe
choice.com
country.sys
debug.exe
deltree.exe
diskcopy.com
display.sys
doskey.com
drvspace.bin,,,32 ;32 flag suppresses version conflict dlg
edit.com
edit.hlp
ega.cpi
extract.exe
fc.exe
fdisk.exe
find.exe
format.com
keyb.com
keyboard.sys
label.exe
mem.exe
mode.com
more.com
move.exe
mscdex.exe
nlsfunc.exe
scandisk.exe,,,32 ;32 flag suppresses ver conflict dlg
scandisk.ini
share.exe
sort.exe
start.exe
subst.exe
sys.com
xcopy.exe
xcopy32.exe
[del.win.reboot]
; Delete all CMD files from the windows dir just before the reboot since these are
; in the Windows\Command dir and shouldn't be in the Windows dir.
; NOTE: THIS SECTION SHOULD BE AN EXACT COPY OF the [cmd.files] section.
ansi.sys
attrib.exe
chkdsk.exe
choice.com
country.sys
dblspace.sys
debug.exe
deltree.exe
diskcopy.com
display.sys
doskey.com
drvspace.bin
drvspace.sys ;ok to delete this--it's copied in applets.inf
edit.com
edit.hlp
ega.cpi
extract.exe
fc.exe
fdisk.exe
find.exe
format.com
keyb.com
keyboard.sys
label.exe
mem.exe
mode.com
more.com
move.exe
mscdex.exe
nlsfunc.exe
scandisk.exe
scandisk.ini
share.exe
sort.exe
start.exe
subst.exe
sys.com
xcopy.exe
xcopy32.exe
[del.old.msdos.files]
ansi.sys
attrib.exe
chkdsk.exe
choice.com
country.sys
debug.exe
DEFRAG.HLP
deltree.exe
diskcopy.com
display.sys
doskey.com
drvspace.bin
edit.com
edit.hlp
ega.cpi
fc.exe
fdisk.exe
find.exe
format.com
keyb.com
keyboard.sys
label.exe
mem.exe
mode.com
more.com
move.exe
mscdex.exe
MWUNDEL.EXE
MWUNDEL.HLP
nlsfunc.exe
scandisk.exe
scandisk.ini
share.exe
sort.exe
start.exe
subst.exe
sys.com
xcopy.exe
;others not copied in the [cmd.files] section
emm386.exe
networks.txt
os2.txt
ramdrive.sys
viktig.txt
setver.exe
smartdrv.exe
;Compaq DOS 5.0
cache.exe
cemm.exe
cemmp.exe
dos5help.chd
fastart.exe
fsedit.exe
help.exe
tu.exe
upcu.exe
;Non MS-DOS Operating Systems:
delpurge.exe
delwatch.exe
diskmap.exe
diskopt.exe
dosbook.exe
hidos.sys
lock.exe
login.exe
memmax.exe
password.exe
rendir.exe
setup.exe
sys.com
taskmax.exe
taskmax.ini
touch.exe
uninstal.exe
xdel.exe
xdir.exe
[ren.old.msdos.files]
mode_dos.com, mode.com
[del.old.msdos.root]
WINA20.386
[ren.dxxspace.utils]
; backup ms-dos 6.x disk compression tools (only done on clean install)
DRVSPACE.EX~, DRVSPACE.EXE
DBLSPACE.EX~, DBLSPACE.EXE
DEFRAG.EX~, DEFRAG.EXE
SCANDISK.EX~, SCANDISK.EXE
[del.dxxspace.utils]
; Delete ms-dos 6.x disk compression tools (only done on upgrade install)
DRVSPACE.EXE
DBLSPACE.EXE
DEFRAG.EXE
SCANDISK.EXE
[dxxspace.bat.files]
; copy over dummy stubs for ms-dos 6.x disk compression tools
DRVSPACE.BAT
DBLSPACE.BAT
DEFRAG.BAT
SCANDISK.BAT
; If user has MS compression installed and he has MS DBLSPACE.BIN
; the foll. section is GenInstalled.
;
[SetupMSDblSpace]
CopyFiles = msdbl.files
UpdateCfgSys = config_dummy
[msdbl.files]
dblspace.sys,drvspace.sys,,32 ;32 flag suppresses ver conflict dlg
; empty section -- guarantees path fixup for any DBLSPACE.SYS in config.sys!
[config_dummy]
; If user has MS compression installed but he has a non MS DBLSPACE.BIN
; the foll. section is GenInstalled.
;
[SetupNonMSDblSpace]
[del.premsdos5.files]
append.com
asgnpart.com
backup.exe
bootf.com
cache.sys
cemm.exe
cemmp.exe
chkdsk.exe
cmpqadap.com
compact.exe
configur.com
debug.exe
detect.com
diskcomp.exe
diskcopy.exe
diskinit.com
diskinit.exe
dosutil.meu
dskscan.exe
dsksetup.com
edlin.exe
emm386.sys
enhdisk.sys
fastopen.exe
fastart.exe
fdisk.com
filesys.exe
for150.exe
format.exe
gdu.exe
graftabl.exe
graphics.exe
hardrive.sys
hpcache.com
hpdcache.com
ifsfunc.exe
indskbio.sys
install.exe
keyb32.com
keybchf.com
keybchg.com
keybda.com
keybfr.com
keybfr.exe
keybgk.com
keybgr.com
keybgr.exe
keybit.com
keybit.exe
keybno.com
keybsp.com
keybsv.exe
keybsw.com
keybuk.com
keybuk.exe
keybus.com
label.exe
mode.exe
mvbuild.exe
pamcode.com
paminstl.com
part.exe
password.exe
prep.exe
recover.exe
restore.exe
select.com
select.dat
select.exe
select.hlp
select.prt
select1.dat
select2.dat
setup.exe
shell.clr
shell.hlp
shell.meu
shellb.com
shellc.exe
tree.exe
vdisk.sys
xmaem.sys
zcache.sys
zspool.com
[ios.files]
apix.vxd
bigmem.drv
cdfs.vxd
cdtsd.vxd
cdvsd.vxd
disktsd.vxd
diskvsd.vxd
esdi_506.pdr
hsflop.pdr
necatapi.vxd
scsi1hlp.vxd
scsiport.pdr
voltrack.vxd
rmm.pdr
ncrc810.mpd
ncrc710.mpd
amsint.mpd
aic78xx.mpd
atapchng.vxd
torisan3.vxd
[ios.files.del]
;Delete these--they have been replaced w/ .vxd versions
apix.386
cdfs.386
cdtsd.386
cdvsd.386
disktsd.386
diskvsd.386
scsi1hlp.386
voltrack.386
[setup.files.inf]
adapter.inf
apps.inf
awupd.inf
mscdrom.inf
diskdrv.inf
fonts.inf
keyboard.inf
joystick.inf
layout.inf
locale.inf
machine.inf
mf.inf
midi.inf
msdet.inf
msdisp.inf
msfdc.inf
mshdc.inf
msmouse.inf
msports.inf
msprint.inf
msprint2.inf
multilng.inf
nodriver.inf
pcmcia.inf
prtupd.inf
scsi.inf
setupc.inf
unknown.inf
vidcap.inf
wave.inf
[setup.files.sys]
setupx.dll
msprint.dll
msprint2.dll
sysdetmg.dll
[setup.files.win]
logos.sys ;shutdown logo
logow.sys ;shutdown logo
setup.bmp ;setup wash
winver.exe
[setup.files.machine]
wininit.exe,,,1
[base.help.files]
31users.hlp
apps.hlp
license.hlp
license.txt
mouse.hlp
mouse.cnt
notepad.cnt
notepad.hlp
progman.cnt
progman.hlp
windows.cnt
windows.hlp
winfile.cnt
winfile.hlp
winhlp32.cnt
winhlp32.hlp
[base.help.winhelp]
winhelp.exe
winhlp32.exe
[base.help.sys]
ftsrch.dll
stem0409.dll
whlp16t.dll
whlp32t.dll
[net.help.files]
NETWORK.HLP
SERVER.HLP
[ole.help.files]
common.hlp
[printer.files.sys]
control.inf
msprint.dll
msprint2.dll
spool32.exe
spoolss.dll
spbanner.wmf
winspl16.drv
winspool.drv
[printer.inis]
win.ini,windows,,"NullPort=None"
win.ini,ports,,"LPT1:="
win.ini,ports,,"LPT2:="
win.ini,ports,,"LPT3:="
win.ini,ports,,"COM1:=9600,n,8,1,x"
win.ini,ports,,"COM2:=9600,n,8,1,x"
win.ini,ports,,"COM3:=9600,n,8,1,x"
win.ini,ports,,"COM4:=9600,n,8,1,x"
win.ini,ports,,"FILE:="
win.ini,windows,"spooler=",
win.ini,windows,"DosPrint=",
[config_default]
DevDefXms=himem.sys,10-23-92,4.00
DevUmbProv=emm386.exe,10-23-92,4.00
DevXmsProv=386max.sys
DevXmsProv=bluemax.sys
DevXmsProv=qemm386.sys
DevXmsProv=rm386.exe
DevRename=emm386.sys,emm386.exe
DevRename=emm386.dos,emm386.exe
DevDelete=smartdrv.sys,10-23-92,4.00
DevDelete=smartdrv.exe ;to remove double_buffering
Files=30
Buffers=30,0
Stacks=9,256
Fcbs=4
DOS=high,noumb,auto
PreFixPath=26,25,10,13
RemOldPath=33,32
TmpDir=27,TEMP ; line to Validate the TMP and TEMP variables in CONFIG.SYS
;RemKey=LastDrive
shell=command.com
DevDelete=ifshlp.sys
DevDelete=dlshelp.sys ;ibm's ifshlp.sys
DevDelete=fastopen
DevDelete=fastopen.exe
DevDelete=append
DevDelete=append.exe
DevDelete=share.exe
DevDelete=share.com
DevDelete=share
DevDelete=mirror.exe
DevDelete=mirror.com
DevDelete=mirror
DevDelete=ega.sys
DevDelete=DRIVER.SYS
DevDelete=redirect.exe
;PCTOOLS MS-DOS Shell:
DevDelete=PCSHELL
DevDelete=PCSHELL.EXE
;Old Iclandic keybd drivers:
DevDelete=ISLAND.SYS
DevDelete=ISL861.SYS
DevDelete=ISL850.SYS
DevDelete=MEMDRV.EXE
; Remove TSR that Carbon Copy installs:
DevDelete=doshost.exe
; Remove TSR that comes installed on at&t globalyst 360 pentium
DevDelete=wbide.exe
; Remove Video 7 VGA driver:
DevDelete=RAMBIOS.SYS
; Remove MS-DOS 6.x UNDELTE utility
DevDelete=undelete.exe
; BlueMax utility that does things that Windows now does autoematically:
DevDelete=EXTRADOS.MAX
; QEMM 7,x utilities that do things that Win 95 now does automatically:
DevDelete=DOSDATA.SYS
DevDelete=DOS-UP.SYS
DevDelete=ST-DBL.SYS
DevDelete=ST-DSPC.SYS
; Remove Compaq PnP handler (replace w/ built-in Win 95 PnP)
DevDelete=CPQCM.SYS
DevDelete=DWCFGMG.SYS ;Intel PnP handler
DevDelete=ADI2C130.SYS ;Appian PCI IDE Controller driver
DevDelete=um8673.sys ;Compaq
;3rd party remote net TSRs:
DevDelete = rln.exe
DevDelete = rlnAsync.exe
DevDelete = S64DDPMS ;Stealth 64 PCI driver
DevDelete = S64DDPMS.COM
DevDelete = PCDISK.EXE ;Zenith Znote driver
; Remove Anti-Virus Programs
DevDelete = vsafe.sys ;Central Point
DevDelete = vsafe.com ;Central Point/MS-DOS 6
DevDelete = vdefend.sys ;PC-Tools
DevDelete = vdefend.com ;PC-Tools
DevDelete = vwatch.com ;PC-Tools
DevDelete = vaccine.exe ;Vaccine Antivirus Program
DevDelete = virstop.exe ;F-Prot Anti-Virus
DevDelete = navtsr.exe ;Norton Anti-virus
DevDelete = nav_.sys ;Norton Anti-virus
DevDelete = nav.drv ;Norton Anti-virus
DevDelete = nav&.sys ;Norton Anti-virus
;Remove lines that start any of the following disk caches:
DevDelete = cache-at.sys ; Golden Bow Software
DevDelete = cache-em.sys ; Golden Bow Software
DevDelete = cache.exe ; Disk Cache Utility
DevDelete = cacheclk.exe ;Helix MultiMedia Cloaking Ver 1.0
DevDelete = cloaking.exe
DevDelete = mouseclk.exe
DevDelete = fast512.sys
DevDelete = fast.exe
DevDelete = faste.exe
DevDelete = fastx.exe
DevDelete = flash.exe ; Flash Disk Cache Utility"hyper386.exe ;"Hyper Disk Cache Utility
DevDelete = hyper286.exe ; Hyper Disk Cache Utility"
DevDelete = hyper386.exe ; Shareware disk cache
DevDelete = hyperdkc.exe ; Hyper Disk Cache Utility
DevDelete = hyperdke.exe ; Hyper Disk Cache Utility
DevDelete = hyperdkx.exe ; Hyper Disk Cache Utility
DevDelete = ibmcache.sys
DevDelete = icache.sys
DevDelete = l.com ; Lightning Disk Cache
DevDelete = mcache.sys ; Paul Mace Utilites
DevDelete = ncache.exe ; Norton Disk Cache Utility
DevDelete = ncache2.exe ; Norton Disk Cache Utility
DevDelete = pc-cache.com ; PC Tools Disk Cache Utility
DevDelete = pc-kwik.exe ; PC-Kwik Disk Cache Utility
DevDelete = pcache.com ; Print cache
DevDelete = pckkey.exe ; Multisoft Super PC Kwik Windows driver
DevDelete = pckscrn.exe ; Multisoft Super PC Kwik Windows driver
DevDelete = pckwin.sys ; Multisoft Super PC Kwik Windows driver
DevDelete = poweron.bat ; Batch file which turns on Super PC Kwik (from v 3.1 PowerPack)
DevDelete = qcache.exe ; 386 Max Disk Cache Utility
DevDelete = qcache.win ; 386 Max/BlueMax Disk Cache Utility
DevDelete = scpcdext.exe ; Norton CD-ROM Cache
DevDelete = sdcdext.exe ; Norton CD-ROM Cache
DevDelete = scplus.exe ; SpeedCache for Disks and CD-ROM
DevDelete = speedrv.exe ; Norton Speed Drive
DevDelete = super.exe ; Super PC Kwik
DevDelete = superon.bat ; Batch file which turns on Super PC Kwik
DevDelete = superpck.exe ; Multisoft Super PC Kwik disk cache
DevDelete = zcache.sys ; Zenith Data Systems OEM from DOS 3.3 & 4.01
;Remove the following from previous versions of OEM-DOS
DevDelete = astcache.sys ; AST 3.30
DevDelete = cache.sys ; Compaq 3.20, Dell 3.30
DevDelete = cacher.sys ; AST 3.30, Olivetti 3.30
DevDelete = cemm.exe ; DOS 3.20, 3.21, 3.30, 3.31, 4.00
DevDelete = cemmp.exe ; DOS 3.20, 3.21, 3.30, 3.31, 4.00, Compaq 5.00
DevDelete = enhdisk.sys ; Compaq 3.20, 3.31, 4.00
DevDelete = emmdrv.sys ; NCR 3.30
DevDelete = fastdisk.sys ; AST 3.30
DevDelete = hardrive.sys ; HP 3.20, 3.30, 4.00
DevDelete = hpdcache.sys ; HP 4.0
DevDelete = kboard.sys ; Toshiba 3.20
DevDelete = mlpart.sys ; Tandy 3.20, 3.30
DevDelete = olicache.sys ; Olivetti 3.30
DevDelete = ramboost.exe ; IBM 6.3
DevDelete = shelldrv.sys ; NCR 3.30
DevDelete = spooler.sys ; Tandy 3.20, 3.30
DevDelete = xdisk.sys ; Unisys 3.20
DevDelete = xma2ems.sys ; DOS 4.00
DevDelete = xmaem.sys ; DOS 4.00
DevDelete = zspool.sys ; Zenith 3.20, 3.21
;For non MS-DOS operating systems:
DevDelete = delwatch.exe
DevDelete = delpurge.exe
DevDelete = diskmap.exe
DevDelete = diskopt.exe
DevDelete = dpms.exe
DevDelete = emmxma.sys
DevDelete = fastopen.exe
DevDelete = hidos.sys
;DevDelete = lock.exe
DevDelete = login.exe
DevDelete = memmax.exe
DevDelete = nwcache.exe
DevDelete = password.exe
DevDelete = pckwik.sys
DevDelete = rendir.exe
DevDelete = script.exe
DevDelete = superpck.exe
DevDelete = taskmax.exe
DevDelete = taskmgr.exe
DevDelete = touch.exe
DevDelete = vdisk.sys
DevDelete = xdel.exe
DevDelete = xdir.exe
; Fix the path to keyboard.sys in the install=key line
CfgFixArgs= keyb
[autoexec_default]
; CmdDelete will remove any lines that launch a filename with the .exe, .com, .bat or no extension.
; The ",1" flag after the filename will only remark-out the, it will not delete it (i.e. it will
; add "REM -- By Windows Setup" to the beginning of the line
CmdDelete=smartdrv
CmdDelete=dosshell
CmdDelete=fastopen,1
CmdDelete=append,1
CmdDelete=share
CmdDelete=mirror
CmdDelete=win
CmdDelete=setcfg ;used in M5.
;CmdRename=
PreFixPath=26,25,10,13
RemOldPath=33,32
UnSet=comspec
TmpDir=27,TEMP ;If TEMP and TMP environment variables are not set,
;create a TEMP dir off of LDID_MACHINE and add
;SET TMP and SET TEMP entries in autoexec.bat pointing
;to the new directory
CmdDelete=redirect
;PCTOOLS MS-DOS Shell:
CmdDelete=PCSHELL
;Remove DTC driver:
CmdDelete=ascsi
; Comment-out MS-DOS 6.x utilities:
CmdDelete=undelete,1
CmdDelete=drvspace,1
CmdDelete=dblspace,1
; Remove TSR that Carbon Copy installs:
CmdDelete=doshost
;DELL system menu:
CmdDelete=DELLMENU,1
; Remove TSR that comes installed on at&t globalyst 360 pentium
CmdDelete=wbide
;3rd party remote net TSRs:
CmdDelete = rln
CmdDelete = rlnAsync
CmdDelete = S64DDPMS ;Stealth 64 PCI driver
; Rem out NECs DOS Audio sound card hot key mixer
CmdDelete = csachmx1,1
; Remove Anti-Virus Programs
CmdDelete = vsafe ;Central Point/MS-DOS 6
CmdDelete = vdefend ;PC-Tools
CmdDelete = vwatch ;PC-Tools
CmdDelete = vaccine ;Vaccine Antivirus Program
CmdDelete = virstop ;F-Prot Anti-Virus
CmdDelete = navtsr ;Norton Anti-virus
;Remove lines that start any of the following disk caches:
CmdDelete = cache-at ; Golden Bow Software
CmdDelete = cache-em ; Golden Bow Software
CmdDelete = cache
CmdDelete = cacheclk ;Helix MultiMedia Cloaking Ver 1.0
CmdDelete = fast512
CmdDelete = fast
CmdDelete = faste
CmdDelete = fastx
CmdDelete = flash ; Flash Disk Cache Utility"hyper386.exe ;"Hyper Disk Cache Utility
CmdDelete = hyper286 ; Hyper Disk Cache Utility"
CmdDelete = hyper386 ; Shareware disk cache
CmdDelete = hyperdkc ; Hyper Disk Cache Utility
CmdDelete = hyperdke ; Hyper Disk Cache Utility
CmdDelete = hyperdkx ; Hyper Disk Cache Utility
CmdDelete = ibmcache
CmdDelete = icache
CmdDelete = l ; Lightning Disk Cache
CmdDelete = mcache ; Paul Mace Utilites
CmdDelete = mouseclk
CmdDelete = ncache ; Norton Disk Cache Utility
CmdDelete = ncache2 ; Norton Disk Cache Utility
CmdDelete = pc-cache ; PC Tools Disk Cache Utility
CmdDelete = pc-kwik ; PC-Kwik Disk Cache Utility
CmdDelete = pckwin ; Multisoft Super PC Kwik Windows driver
CmdDelete = pckscrn ; Multisoft Super PC Kwik Windows driver
CmdDelete = pckkey ; Multisoft Super PC Kwik Windows driver
CmdDelete = poweron.bat,1 ; Batch file which turns on Super PC Kwik (from v 3.1 PowerPack) (REM out line)
CmdDelete = qcache ; 386 Max Disk Cache Utility
CmdDelete = scpcdext ; Norton CD-ROM Cache
CmdDelete = sdcdext ; Norton CD-ROM Cache
CmdDelete = scplus ; SpeedCache for Disks and CD-ROM
CmdDelete = speedrv ; Norton Speed Drive
CmdDelete = super ; Super PC Kwik
CmdDelete = superon,1 ; Batch file which turns on Super PC Kwik (REM out line)
CmdDelete = superpck ; Multisoft Super PC Kwik disk cache
CmdDelete = zcache ; Zenith Data Systems OEM from DOS 3.3 & 4.01
CmdDelete = pcache ; Print cache
;For non MS-DOS operating systems:
CmdDelete = diskopt
CmdDelete = delq
CmdDelete = delpurge
CmdDelete = delwatch
CmdDelete = diskmap
CmdDelete = dpms
CmdDelete = eraq
;CmdDelete = lock
;CmdDelete = login
CmdDelete = memmax
CmdDelete = nwcache
CmdDelete = password
CmdDelete = ramboost
CmdDelete = rendir
CmdDelete = script
CmdDelete = taskmax
CmdDelete = taskmgr
CmdDelete = touch
CmdDelete = xdel
CmdDelete = xdir
;
; Rem lines out in autoexec.bat or any batch file executed
; by autoexec.bat which has a copy,del,move,rename, command
; followed by one of these file names somewhere on it's
; commandline
; Review: Do we need this list anymore as we un-conditionally Rem out the
; Cpy, Ren and Del lines.
RemCpyRenDel = config.sys
RemCpyRenDel = autoexec.bat
RemCpyRenDel = protocol.ini
RemCpyRenDel = win.ini
RemCpyRenDel = system.ini
CmdFixArgs = keyb
;
; These will be called before setup queued any files to copy
[PreQueueProviders]
netdi.dll,SBSTREECOPYNWBOOTDISK
; These are called before any files are copied.
[BeforeProvider]
msprint.dll, SETUPENTRY
; These are called once all the files (.infs etc)
; have been copied. Also the directory hierarchy is there. Also, we are
; about ready to reboot after flushing TP cache.
[AfterProvider]
netdi.dll,NDICLEANUPB4REBOOT
;The SURPLSETUP must be the last afterprovider to get things in the rpl image.
setupx.dll,SURPLSETUP
; These are all the keys that are not deleted in HKLM if doing a
; clean install.
[CleanoutReg]
HARDWARE
SOFTWARE
SYSTEM
CONFIG
ENUM
REGISTRY
[SetverEntries]
APPEND.EXE
BASIC.COM
BASICA.COM
DISKCOMP.EXE
EXTDISK.SYS
GRAPHICS.COM
FASTOPEN.EXE
MODE_DOS.COM
PRINT.EXE
REPLACE.EXE
RESTORE.EXE
SCPLUS.EXE
SCSIC710.SYS
TREE.COM
VDISK.SYS
[SetupUnInstallYes]
CopyFiles=un.copy
AddReg=Un.AddReg
[SetupUnInstallNo]
[un.copy]
uninstal.exe
[Un.AddReg]
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\Windows95,DisplayName,,"%Win95_DESC%"
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\Windows95,UninstallString,,"uninstal.exe"
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\Windows95Cleanup,DisplayName,,"%Win95_Cln_DESC%"
HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\Windows95Cleanup,UninstallString,,"uninstal.exe /delete"
[Data]
CCP=0
[Strings]
;Non-Localizable strings:
KEY_OPTIONAL = "SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponents"
KEY_RENAME = "Software\Microsoft\Windows\CurrentVersion\RenameFiles"
KEY_DEL = "Software\Microsoft\Windows\CurrentVersion\DeleteFiles"
KEY_CFGMGR = "System\CurrentControlSet\Services\VxD\CONFIGMG"
KEY_SVCSVXD = "System\CurrentControlSet\Services\VxD"
KEY_RUNONCE = "Software\Microsoft\Windows\CurrentVersion\RunOnce"
KEY_VMM32FILES = "System\CurrentControlSet\Control\VMM32Files"
KEY_INSTALLED = "System\CurrentControlSet\Control\InstalledFiles"
KEY_CURRENT = "Software\Microsoft\Windows\CurrentVersion"
;Localizable strings:
ProductName = "Microsoft Windows 95"
WINDOWS_DEFAULT = "Windows-standard" ; must match name of default color scheme
NULL = ""
WINBASE = "Grunnleggende Windows-komponenter"
SRCPATH = "Distribusjonskatalog"
MAIN_DESC = "Hovedgruppe"
PRINTER = "Midlertidige utskriftsfiler"
SYSTOOLS_DESC = "Tilbehør\Systemverktøy"
PenPal_DESC = "Pen-palett"
StartUp_DESC = "Oppstart"
Explorer_DESC = "Utforsker"
WinExplorer_DESC= "Windows Utforsker"
WinExplorer_ShortDESC = "Wexplore"
MSDOSPrmpt_DESC = "MS-DOS-ledetekst"
MSDOSPrmpt_ShortDESC = "Dosprmpt"
WinBug_DESC = "Feilrapportering"
RelNotes_DESC = "Merknader til betaversjonen av Windows 95 "
ConfigMSDOS_Desc= "Innstillinger for MS-DOS-programmer"
;SetTimeZone_Desc= "Tidssone"
CplInit_Desc = "Kontrollpanel"
HelpInit_Desc = "Hjelp for Windows"
Grpconv_Desc = "Programmene på Start-menyen" ;MUST MATCH EXACTLY WITH Grpconv_Desc in WINVER.INX
APPS_DESC = "Tilbehør"
Notepad_DESC = "Notisblokk"
WinNews_DESC = "Microsoft WinNews"
desktop_DESC = "Skrivebord"
media_dir = "media"
CPanel_DESC = "Kontrollpanel"
Printers_DESC = "Skrivere"
Fileman_DESC = "Filbehandling"
Fixdrive_Desc = "Diskskanning"
BEZIER = "Kurver~1" ; short (8 char) version of "Curves and Colors"
SSMARQUE = "Rullen~1" ; short (8 char) version of "Scrolling Marquee"
SSMYST = "Dansen~1" ; short (8 char) version of "Mystify Your Mind"
SCRNSAVE = "Tom sk~1" ; short (8 char) version of "Blank Screen"
SSFLYWIN = "Logoer~1" ; short (8 char) version of "Flying Windows"
SSSTARS = "En rei~1" ; short (8 char) version of "Flying Through Space"
SETUP_BMP = "Installasjon" ; localized name for setup wallpaper
Win95_DESC = "Windows 95"
Win95_Cln_DESC = "Gamle Windows 3.x- og MS-DOS-systemfiler"
DOC_GRP = "Dokumenter" ; needs to match what's used in grpconv source - NO SPACES!
Readme = "Viktig"
Readme_Loc = "Viktig" ; for non-US replace w/ localized name for Readme
ProgramsFolder= "Programmer"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.