; Tulip Enabled. ; ; TWAIN ONLY (NO UI) INSTALL ; -- Alternate TWAIN/Commercial WIA version ; ; HPG55ALT.INF -- Windows Still Image Setup File for hp_5530 series Scanner ; ; Note - this file is for Win98/Win98SE/Windows 2000/Windows XP ; Copyright (c) 2002 Hewlett-Packard Company ; Leave these lines as they are. ; ; The following GUID uniquely identifies this .INF ; GUID: {blah-blah-blah} [Version] Signature="$CHICAGO$" Class=Image ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f} Provider=%Provider% CatalogFile=hpg55alt.cat DriverVer=09/12/2003,2.1.1.2 ; Class installer that prevents a Win95 USB Hardware First Installation. [ClassInstall] AddReg=HPImageClass.AddReg CopyFiles=HPImageClass.CopyFiles [HPImageClass.CopyFiles] hpsj95ci.dll hpgcvsco.dll [HPImageClass.AddReg] HKR,,,,%HPImageClass.Desc% HKR,,Installer,,hpsj95ci.dll HKR,,NoUseClass,,1 HKR,,NoInstallClass,,1 HKR,,NoDisplayClass,,1 HKR,,SilentInstall,,1 HKR,,Icon,,-20 [DestinationDirs] ; By default, files will be copied to \windows\system. DefaultDestDir=11 HP5530.Usb.WDMdriver=10,system32\drivers ; \windows\system32\drivers HP5530.CopyDS=10,TWAIN_32 ; \windows\TWAIN_32 [ControlFlags] ; Remove comment from this line if all devices are PnP. ExcludeFromSelect=* [Manufacturer] %Mfg%=Models, NT.5.1 [Models] ;STI Models (98 and 2K) %HP5530c.DeviceDesc% = HP5530.Usb, USB\VID_03f0&Pid_1605 ;WIA Models (ME) %HP5530c.DeviceDesc% = HP5530.Usb.WIA, USB\VID_03f0&Pid_1605 ; Windows XP(Whistler) or later. [Models.NT.5.1] ;WIA Models %HP5530c.DeviceDesc% = HP5530.Usb.NTWIA, USB\VID_03f0&Pid_1605 ; ***************************************************************************************** ; Win98, 98SE only (STI) ; VERY IMPORTANT - do not change the DriverVer date in this section. Leave at 1/10/2000 ; ***************************************************************************************** [HP5530.Usb] ;Non-Millenium OSes only. Make sure DriverVer is NOT newer than the WIA section!!! DriverVer=09/10/2000,2.1.1.2 SubClass=StillImage DeviceType=1 DeviceSubType=0x2 ;Read buttons via polling Capabilities=0x3 DeviceData=HP5530.DeviceData AddReg=HPScan.Usb.AddReg,HPScan.AddReg.STI,HPScan.CurrentDevice CopyFiles=HP5530.Usb.CopyFiles,HP5530.Usb.WDMdriver,HP5530.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU" ICMProfiles="sRGB Color Space Profile.icm" ; ***************************************************************************************** ; Windows Millenium Only (WIA) ; ***************************************************************************************** [HP5530.Usb.WIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=09/12/2003,2.1.1.2 Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x2 Capabilities=0x33 ;Read buttons via polling DeviceData=HP5530.DeviceData.WIA AddReg=HPScan.Usb.AddReg,HPScan.AddReg.WIA,HPScan.CurrentDevice CopyFiles=HP5530.Usb.CopyFiles.WIA,HP5530.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU" ICMProfiles="sRGB Color Space Profile.icm" ; ***************************************************************************************** ; Windows 2000 Only (STI) ; ***************************************************************************************** [HP5530.Usb.NT] DriverVer=09/12/2003,2.1.1.2 ; The next two lines are new from Win2k to do the install of the kernel mode driver. Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x2 ;Read buttons via polling Capabilities=0x3 DeviceData=HP5530.DeviceData AddReg=HPScan.Usb.AddReg,HPScan.AddReg.STI CopyFiles=HP5530.Usb.CopyFiles,HP5530.CopyDS RegisterDlls=HP5530.RegisterDlls.STI ;; needs new co-installer install section to process this ;VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU" ICMProfiles="sRGB Color Space Profile.icm" [HP5530.Usb.NT.HW] AddReg=HP5530.HWmodelU [HP5530.Usb.NT.Services] Include=sti.inf Needs=STI.USBSection.Services [HP5530.Usb.NT.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles ; ***************************************************************************************** ; Windows XP (Whistler) and later (WIA) ; ***************************************************************************************** [HP5530.Usb.NTWIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=09/12/2003,2.1.1.2 Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x2 Capabilities=0x33 ;Read buttons via polling DeviceData=HP5530.DeviceData.WIA AddReg=HPScan.Usb.AddReg,HPScan.AddReg.WIA CopyFiles=HP5530.Usb.CopyFiles.WIA,HP5530.CopyDS RegisterDlls=HP5530.RegisterDlls.WIA ;VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU" ICMProfiles="sRGB Color Space Profile.icm" [HP5530.Usb.NTWIA.HW] AddReg=HP5530.HWmodelU [HP5530.Usb.NTWIA.Services] Include=sti.inf Needs=STI.USBSection.Services [HP5530.Usb.NTWIA.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles ; ***************************************************************************************** ; Common sections ; ***************************************************************************************** ; This is for the coinstaller functionality that replaces VendorSetup [HP5530.HWmodelU] HKR,,CoinstallerModel,,"5500CU" [Coinstaller.AddReg] HKR,,CoInstallers32,0x00010000,"hpgcvsco.dll,HPScannerCoInstaller" [HP5530.DeviceData] TwainDS="" InstallCLSID={9C94748D-C29C-4f13-9431-6BB345EBB4B5} InstallRegPath="Software\HP\Scanners" TulipCLSID={5596420E-2DAB-42ca-9E6D-CBCC9F1F1CB8} TulipDriver=hpgt55.dll [HP5530.DeviceData.WIA] TwainDS="" Server=local InstallCLSID={9C94748D-C29C-4f13-9431-6BB345EBB4B5} InstallRegPath="Software\HP\Scanners" TulipCLSID={5596420E-2DAB-42ca-9E6D-CBCC9F1F1CB8} TulipDriver=hpgt55.dll ; ; TulipIOType - from Tulip doc for ENUM SCANNER_IO_TYPE ; 1 = USB, 2 = Parallel, 3 = SCSI, 4 = DOT4, 5 = IP (network), 6 = USB2, 7 = 1394 (firewire). ; [HPScan.Usb.AddReg] ; This all depends on which kernel services you need ; Hardware configuration is not known HKR,,HardwareConfig,1,1 HKR,,DevLoader,,*NTKERN HKR,,NTMPDriver,,"usbscan.sys" HKR,DeviceData,TulipIOType,0x10001,1 [HPScan.AddReg.WIA] HKR,,USDClass,,"{552A819C-9CAC-4379-9638-BD335A10A11B}" HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B},,,"Hewlett-Packard Scanjet Tulip Common USD" HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,,,%11%\hpgcwiam.dll HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,ThreadingModel,,"Both" [HPScan.AddReg.STI] ; Register the Tulip Common USD HKR,,USDClass,,"{5603B647-4E79-44BD-92C5-4EC272894125}" HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125},,,"Hewlett-Packard Scanjet Tulip Common USD" HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,,,%11%\hpgctusd.dll HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,ThreadingModel,,"Both" [HPScan.CurrentDevice] ; This marks this SW instance as a the most current install device. ; VendorSetup needs this to determine the HW devnode for the current device. ; This MUST be called for all Windows 9x installs, or the coInstaller won't ; recognize a software-first install. HKR,,LastInstalled,,"True" [HP5530.RegisterDlls.WIA] ; New Whistler Directive for Component registration. 11,,hpgt55.dll,1 11,,hpgcwiam.dll,1 [HP5530.RegisterDlls.STI] ; New Whistler Directive for Component registration. 11,,hpgt55.dll,1 11,,hpgctusd.dll,1 [HP5530.Usb.CopyFiles] ; Copy the user mode minidriver. hpgctusd.dll,,,0x60 hpgcvsco.dll,,,0x60 hpgt55.dll,,,0x60 [HP5530.Usb.CopyFiles.WIA] hpgcwiam.dll,,,0x60 hpgt55.dll,,,0x60 hpgcvsco.dll,,,0x60 [HP5530.CopyDS] [HP5530.Usb.WDMdriver] ; Copy the kernel drivers that are needed. usbscan.sys,usbscan.sy_,,0x60 [Coinstaller.CopyFiles] hpgcvsco.dll,,,0x60 [SourceDisksNames] 99=%DiskName%,, [SourceDisksFiles] hpgctusd.dll=99 ;tulip sti usd for 98/2k hpgcvsco.dll=99 ;co-installer for all 0Ss hpsj95ci.dll=99 ;prevents usb hw 1st install on 95 usbscan.sy_=99 ;98 usb kernel driver hpgcwiam.dll=99 ;wia minidriver for me/xp hpgt55.dll=99 ;"the" driver [Strings] ; Always put strings down here so they can be easily localized to ; other languages. Provider="Hewlett-Packard" Mfg="Hewlett-Packard" DiskName="hp_scanning" HPImageClass.desc="HP Win95 Lockout Class" HP5530c.DeviceDesc="hp scanjet 5530"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.