; Tulip Enabled.
;
; TWAIN ONLY (NO UI) INSTALL
; -- Alternate TWAIN/Commercial WIA version
;
; HPG55ALT.INF -- Windows Still Image Setup File for hp_5530 series Scanner
;
; Note - this file is for Win98/Win98SE/Windows 2000/Windows XP
; Copyright (c) 2002 Hewlett-Packard Company
; Leave these lines as they are.
;
; The following GUID uniquely identifies this .INF
; GUID: {blah-blah-blah}
[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%Provider%
CatalogFile=hpg55alt.cat
DriverVer=09/12/2003,2.1.1.2
; Class installer that prevents a Win95 USB Hardware First Installation.
[ClassInstall]
AddReg=HPImageClass.AddReg
CopyFiles=HPImageClass.CopyFiles
[HPImageClass.CopyFiles]
hpsj95ci.dll
hpgcvsco.dll
[HPImageClass.AddReg]
HKR,,,,%HPImageClass.Desc%
HKR,,Installer,,hpsj95ci.dll
HKR,,NoUseClass,,1
HKR,,NoInstallClass,,1
HKR,,NoDisplayClass,,1
HKR,,SilentInstall,,1
HKR,,Icon,,-20
[DestinationDirs]
; By default, files will be copied to \windows\system.
DefaultDestDir=11
HP5530.Usb.WDMdriver=10,system32\drivers ; \windows\system32\drivers
HP5530.CopyDS=10,TWAIN_32 ; \windows\TWAIN_32
[ControlFlags]
; Remove comment from this line if all devices are PnP.
ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models, NT.5.1
[Models]
;STI Models (98 and 2K)
%HP5530c.DeviceDesc% = HP5530.Usb, USB\VID_03f0&Pid_1605
;WIA Models (ME)
%HP5530c.DeviceDesc% = HP5530.Usb.WIA, USB\VID_03f0&Pid_1605
; Windows XP(Whistler) or later.
[Models.NT.5.1]
;WIA Models
%HP5530c.DeviceDesc% = HP5530.Usb.NTWIA, USB\VID_03f0&Pid_1605
; *****************************************************************************************
; Win98, 98SE only (STI)
; VERY IMPORTANT - do not change the DriverVer date in this section. Leave at 1/10/2000
; *****************************************************************************************
[HP5530.Usb]
;Non-Millenium OSes only. Make sure DriverVer is NOT newer than the WIA section!!!
DriverVer=09/10/2000,2.1.1.2
SubClass=StillImage
DeviceType=1
DeviceSubType=0x2 ;Read buttons via polling
Capabilities=0x3
DeviceData=HP5530.DeviceData
AddReg=HPScan.Usb.AddReg,HPScan.AddReg.STI,HPScan.CurrentDevice
CopyFiles=HP5530.Usb.CopyFiles,HP5530.Usb.WDMdriver,HP5530.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU"
ICMProfiles="sRGB Color Space Profile.icm"
; *****************************************************************************************
; Windows Millenium Only (WIA)
; *****************************************************************************************
[HP5530.Usb.WIA]
;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!!
DriverVer=09/12/2003,2.1.1.2
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x2
Capabilities=0x33 ;Read buttons via polling
DeviceData=HP5530.DeviceData.WIA
AddReg=HPScan.Usb.AddReg,HPScan.AddReg.WIA,HPScan.CurrentDevice
CopyFiles=HP5530.Usb.CopyFiles.WIA,HP5530.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU"
ICMProfiles="sRGB Color Space Profile.icm"
; *****************************************************************************************
; Windows 2000 Only (STI)
; *****************************************************************************************
[HP5530.Usb.NT]
DriverVer=09/12/2003,2.1.1.2
; The next two lines are new from Win2k to do the install of the kernel mode driver.
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x2 ;Read buttons via polling
Capabilities=0x3
DeviceData=HP5530.DeviceData
AddReg=HPScan.Usb.AddReg,HPScan.AddReg.STI
CopyFiles=HP5530.Usb.CopyFiles,HP5530.CopyDS
RegisterDlls=HP5530.RegisterDlls.STI ;; needs new co-installer install section to process this
;VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU"
ICMProfiles="sRGB Color Space Profile.icm"
[HP5530.Usb.NT.HW]
AddReg=HP5530.HWmodelU
[HP5530.Usb.NT.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[HP5530.Usb.NT.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles
; *****************************************************************************************
; Windows XP (Whistler) and later (WIA)
; *****************************************************************************************
[HP5530.Usb.NTWIA]
;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!!
DriverVer=09/12/2003,2.1.1.2
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x2
Capabilities=0x33 ;Read buttons via polling
DeviceData=HP5530.DeviceData.WIA
AddReg=HPScan.Usb.AddReg,HPScan.AddReg.WIA
CopyFiles=HP5530.Usb.CopyFiles.WIA,HP5530.CopyDS
RegisterDlls=HP5530.RegisterDlls.WIA
;VendorSetup="hpgcvsco,InstallScanJetSoftware 5500CU"
ICMProfiles="sRGB Color Space Profile.icm"
[HP5530.Usb.NTWIA.HW]
AddReg=HP5530.HWmodelU
[HP5530.Usb.NTWIA.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[HP5530.Usb.NTWIA.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles
; *****************************************************************************************
; Common sections
; *****************************************************************************************
; This is for the coinstaller functionality that replaces VendorSetup
[HP5530.HWmodelU]
HKR,,CoinstallerModel,,"5500CU"
[Coinstaller.AddReg]
HKR,,CoInstallers32,0x00010000,"hpgcvsco.dll,HPScannerCoInstaller"
[HP5530.DeviceData]
TwainDS=""
InstallCLSID={9C94748D-C29C-4f13-9431-6BB345EBB4B5}
InstallRegPath="Software\HP\Scanners"
TulipCLSID={5596420E-2DAB-42ca-9E6D-CBCC9F1F1CB8}
TulipDriver=hpgt55.dll
[HP5530.DeviceData.WIA]
TwainDS=""
Server=local
InstallCLSID={9C94748D-C29C-4f13-9431-6BB345EBB4B5}
InstallRegPath="Software\HP\Scanners"
TulipCLSID={5596420E-2DAB-42ca-9E6D-CBCC9F1F1CB8}
TulipDriver=hpgt55.dll
;
; TulipIOType - from Tulip doc for ENUM SCANNER_IO_TYPE
; 1 = USB, 2 = Parallel, 3 = SCSI, 4 = DOT4, 5 = IP (network), 6 = USB2, 7 = 1394 (firewire).
;
[HPScan.Usb.AddReg]
; This all depends on which kernel services you need
; Hardware configuration is not known
HKR,,HardwareConfig,1,1
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,"usbscan.sys"
HKR,DeviceData,TulipIOType,0x10001,1
[HPScan.AddReg.WIA]
HKR,,USDClass,,"{552A819C-9CAC-4379-9638-BD335A10A11B}"
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B},,,"Hewlett-Packard Scanjet Tulip Common USD"
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,,,%11%\hpgcwiam.dll
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,ThreadingModel,,"Both"
[HPScan.AddReg.STI]
; Register the Tulip Common USD
HKR,,USDClass,,"{5603B647-4E79-44BD-92C5-4EC272894125}"
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125},,,"Hewlett-Packard Scanjet Tulip Common USD"
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,,,%11%\hpgctusd.dll
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,ThreadingModel,,"Both"
[HPScan.CurrentDevice]
; This marks this SW instance as a the most current install device.
; VendorSetup needs this to determine the HW devnode for the current device.
; This MUST be called for all Windows 9x installs, or the coInstaller won't
; recognize a software-first install.
HKR,,LastInstalled,,"True"
[HP5530.RegisterDlls.WIA]
; New Whistler Directive for Component registration.
11,,hpgt55.dll,1
11,,hpgcwiam.dll,1
[HP5530.RegisterDlls.STI]
; New Whistler Directive for Component registration.
11,,hpgt55.dll,1
11,,hpgctusd.dll,1
[HP5530.Usb.CopyFiles]
; Copy the user mode minidriver.
hpgctusd.dll,,,0x60
hpgcvsco.dll,,,0x60
hpgt55.dll,,,0x60
[HP5530.Usb.CopyFiles.WIA]
hpgcwiam.dll,,,0x60
hpgt55.dll,,,0x60
hpgcvsco.dll,,,0x60
[HP5530.CopyDS]
[HP5530.Usb.WDMdriver]
; Copy the kernel drivers that are needed.
usbscan.sys,usbscan.sy_,,0x60
[Coinstaller.CopyFiles]
hpgcvsco.dll,,,0x60
[SourceDisksNames]
99=%DiskName%,,
[SourceDisksFiles]
hpgctusd.dll=99 ;tulip sti usd for 98/2k
hpgcvsco.dll=99 ;co-installer for all 0Ss
hpsj95ci.dll=99 ;prevents usb hw 1st install on 95
usbscan.sy_=99 ;98 usb kernel driver
hpgcwiam.dll=99 ;wia minidriver for me/xp
hpgt55.dll=99 ;"the" driver
[Strings]
; Always put strings down here so they can be easily localized to
; other languages.
Provider="Hewlett-Packard"
Mfg="Hewlett-Packard"
DiskName="hp_scanning"
HPImageClass.desc="HP Win95 Lockout Class"
HP5530c.DeviceDesc="hp scanjet 5530"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.