1. sn2000p.zip Driver
2. MSWIN95.TXT File Contents

MSWIN95.TXT Driver File Contents (sn2000p.zip)

   Windows 95

   Introduction:
   -------------
   This document describes the procedure to install  Windows 95
   driver for SN-2000P PnP ethernet adapter.

   Location of Driver:     \WIN95\PNPNT.SYS

   Installing driver procedure on Microsoft Windows 95 :
   -----------------------------------------------------
      Windows 95 is the operation system with Plug&Play feature. If you set
      the  adapter in  Plug&Play  mode,  Windows 95  will  auto-detect your
      adapter configuration and set it.  The user don't need to do anything
      for the adapter configuration or installing the driver.If you set the
      network card in jumpless mode, you must setup your driver as following
      procedure by Case 2.

   [Case 1] SN-2000P Adapter is PnP Mode:

      Executing Windows 95, it will auto-detect your system configuration
      then  find the adapter hardware .

      1. Ask you to select which driver you want to install, select
         "Driver from disk provided by hardware manufacturer".

      2. Insert the SN-2000P driver disk into drive A and specify
         the driver pathname A:\WIN95 .

      3. Windows 95 will appear some message to insert Windows 95 system
         disk to complete setup step.

      4. Windows 95  will  finish  the  other  installation  procedure
         automatically, then you restart the system.


   [Case 2] SN-2000P Adapter is Jumpless Mode:

      1. When log into Windows 95, click on the "Start" icon ,then move the
         mouse to "Settings" icon and click on the "Control Panel".

      2. In the Control Panel window, click on the "Network" icon.

      3. In the Network Configuration dialog box, choose the "Add.." button.
         "Select  Network  Component Type"  dialog  box  appears, and select
         "Adapter" icon.

      4. select "install from disk" icon, then insert SN-2000P driver
         diskette in floop A, and specify your pathname A:\WINNT95, then
         press ENTER.

      5. Then, you will see "SN-2000P Plug and Play adapter" in the Network
         Configuration dialog box, select it and then click on the
         "Properties" button.

      6. In this dialog box, select "Resources ",the screen will come up with
         settings: IRQ  and  I/O address.  Make sure the  values that come up
         match the actual board settings.

      7. Restarting your system you will acquire network service.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.