# version of .INI file XXYY XX:major version, YY:minor version 0100 # Network card description SN2000P # Type of NIC 1 # name for 'Link Driver' in netx.cfg PNPODI # name for 'DriverName' in protocol.ini PNPND # file name for AMI's Card Service program AICARD29.EXE # path for .CLB for CardSoft IBMPC\INSTALL\CARDSOFT\DLINK.CLB # ipxXXXXX.com (IPX driver) IPXDE65N.COM # ODI driver name PNPODI.COM # path for .NIF file for MicroSoft.(LANMAN) DRIVERS\NIF\SN2000P.NIF # path for DISK1 DISK1 # path for .NIF file for IBM.(LSP) NDIS\LAN_S4\OEMSETUP.NIF # ################################## # number of NOSs supported ################################## 12 # content of NOS 1 # description Persional NetWare # default target directory C:\NWCLIENT # type 0 # flag 1 # content of NOS 2 # description Novell Netware 3.x, 4.x # default target directory C:\NWCLIENT # type 1 # flag 0 # content of NOS 3 # description IBM PC LAN Support program # default target directory C:\LSP # type 2 # flag 1 # content of NOS 4 # description LAN Manager # default target directory C:\LANMAN.DOS # type 3 # flag 0 # content of NOS 5 # description Packet Driver # default target directory C:\TCPIP # type 4 # flag 0 # content of NOS 6 # description Artisoft LANtastic v5.0 # default target directory C:\LANTASTI # type 5 # flag 1 # content of NOS 7 # description Artisoft LANtastic v6.0 # default target directory C:\LANTASTI # type 6 # flag 1 # content of NOS 8 # description Windows for Workgroup 3.1 # default target directory C:\WFW31 # type 7 # flag 0 # content of NOS 9 # description Windows for Workgroup 3.11 # default target directory C:\WFW311 # type 8 # flag 0 # content of NOS 10 # description MS Windows 95 # default target directory C:\WIN95 # type 9 # flag 0 # content of NOS 11 # description MS Windows NT v3.5 # default target directory C:\WINNT35 # type 10 # flag 0 # content of NOS 12 # description MS Windows NT v4.0 # default target directory C:\WINNT40 # type 11 # flag 0 ####################################### # number of NOS operation types ####################################### 12 # --------------------------- # jobs for NOS operation 1 # NETWARE Personal NetWare # --------------------------- # type 1 # flag 0 # files for NOS # number of files 2 # file name list NWCLIENT\DOS\PNPODI.COM NWCLIENT\DOS\PNPODI.INS # A:\NWCLIENT\DOS\NET.CFG # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # ------------------------------ # jobs for NOS operation 2 # NETWARE ODI DOS workstation # ------------------------------ # type 2 # flag 0 # files for NOS # number of files 2 # file name list NWCLIENT\DOS\PNPODI.COM NWCLIENT\DOS\PNPODI.INS # A:\NWCLIENT\DOS\NET.CFG # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZLSL # &ZPNPODI.COM # &ZIPXODI # &Z&F # ------------------------------ # Jobs for NOS operation 3 # IBM PC LAN Support Program # ------------------------------ # type 3 # flag 0 # files for NOS # number of files 2 # file name list NDIS\DOS\LAN_S4\PNPND.DOS NDIS\DOS\LAN_S4\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # ------------------------------ # Jobs for NOS operation 4 # MS LAN Manager # ------------------------------ # type 4 # flag 0 # files for NOS # number of files 3 # file name list MSLANMAN.DOS\DRIVERS\ETHERNET\SN2000P\PROTOCOL.INI MSLANMAN.DOS\DRIVERS\ETHERNET\SN2000P\PNPND.DOS MSLANMAN.DOS\DRIVERS\NIF\SN2000P.NIF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZPNPPD.COM # ------------------------------ # Jobs for NOS operation 5 # Packet Driver # ------------------------------ # type 5 # flag 0 # files for NOS # number of files 1 # file name list PKTDRV\PNPPD.COM # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 1 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell &ZPNPPD.COM # ------------------------------ # Jobs for NOS operation 6 # LANtasti /AI v4.0 # ------------------------------ # type 6 # flag 0 # files for NOS # number of files 2 # file name list MSLANMAN.DOS\DRIVERS\ETHERNET\SN2000P\PROTOCOL.INI MSLANMAN.DOS\DRIVERS\ETHERNET\SN2000P\PNPND.DOS # A:\LANTAS4\PNPLAN.EXE # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZDE-65N # &ZNBIOS # ------------------------------ # Jobs for NOS operation 7 # LANtasti /AI v5.0 # ------------------------------ # type 7 # flag 0 # files for NOS # number of files 1 # file name list LANTAS5\PNPLAN5.EXE # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.sys # number of line added to autoexec.bat 0 # lines added to autoexec.bat # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # &ZDE-65N # &ZNBIOS # ------------------------------ # Jobs for NOS operation 8 # Windows for Workgroup 3.1 # ------------------------------ # type 8 # flag 0 # files for NOS # number of files 2 # file name list WFW31\PNPND.DOS WFW31\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell # DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # ------------------------------ # Jobs for NOS operation 9 # Windows for Workgroup 3.11 # ------------------------------ # type 9 # flag 0 # files for NOS # number of files 4 # file name list WFW311\SN2000P.386 WFW311\PNPND.DOS WFW311\OEMSETUP.INF WFW311\PNPODI.COM # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # ------------------------------ # Jobs for NOS operation 10 # Windows 95 # ------------------------------ # type 10 # flag 0 # files for NOS # number of files 2 # file name list WIN95\PNPNT.SYS WIN95\NETRT.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # ------------------------------ # Jobs for NOS operation 11 # Windows NT v3.5 # ------------------------------ # type 11 # flag 0 # files for NOS # number of files 2 # file name list WINNT35\PNPNT.SYS WINNT35\OEMSETUP.INF # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0 # ------------------------------ # Jobs for NOS operation 12 # Windows NT v4.0 # ------------------------------ # type 12 # flag 0 # files for NOS # number of files 2 # file name list WINNT40\OEMSETUP.INF WINNT40\PNPNT.SYS # update config.sys # number of line added to config.sys 0 # lines added to config.sys # &Z = target directory # &A = irq # &B = port # &C = memory address # &D = slot number # &E = dma number # &F = type of netware shell ##DEVICE=&ZDCD16.EXE /IRQ:&A /IOP:&B &D # update autoexec.bat # number of line added to autoexec.bat 0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.