DATE: 11/21/95 POINT ENABLER FOR CIRRUS LOGIC's PCIC: APEXEMC.SYS OVERVIEW: The point enabler, APEXEMC.SYS, is only needed if you do NOT want to run Card & Socket Services and your PC has a Cirrus Logic PC Card controller chip. This enabler is NOT needed for Windows 95. This enabler does NOT support hot swapping and "hot swapping" is not recommended. (If you remove the card while the application is being used, you will need to reboot with the card installed to use the card again.) To use this enabler, the installation procedure must be modified. INSTALLATION/RE-INSTALLATION: 1) Boot your PC with the Apex Data MultiCard inserted. 2) Perform a normal installation, see README.TXT, but make sure you select SHARED INTERRUPT. 3) If you have already run the installation, re-run it or run EMVIEW and make sure you have SHARED INTERRUPT selected. 4) Copy the enabler for the Cirrus Logic PCIC to the enabler filename: C: CD \APEXEM COPY APEXEMC.SYS APEXEM.SYSDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.