NetWare Server Driver Information
This diskette includes a NetWare Server Driver (NE2000.LAN). This server
driver defaults to the 802.2 frame type. The 802.3 frame type may also be
loaded for this driver to allow 802.3 frame type workstations to login.
The server driver on this disk may be used on NetWare version 3.1x or above
Requried NLM's, for the different versions of NetWare, must be loaded on the
server. The required NLMs for the different versions of NetWare are:
4.x Servers 3.1x Servers
----------- ------------
PATCHMAN.NLM
LSLENH.NLM
MSM.NLM MSM.NLM
MSM31X.NLM
ETHERTSM.NLM ETHERTSM.NLM
NE2000.LAN NE2000.LAN
4.XX Servers
The server driver requires the ETHERTSM.NLM and MSM.NLM to be loaded. If
they are not loaded, it will auto-load them (if they can be found in a search
path). The MSM.NLM and ETHERTSM.NLM should already be in the SYS:SYSTEM
directory on the server. The files on this disk should be used if they
are newer than the current version, already on the server. The SYS:SYSTEM
directory is usually a search path. Therefore, only the NE2000.LAN driver
needs to be loaded manually or via. a *.NCF file.
If the search path is not set up correctly for some reason, each NLM can be
loaded individually as described earlier.
3.1X Servers
The server driver requires the ETHERTSM and MSM31X to be loaded. The MSM31X
requires the LSLENH to be loaded. LSLENH requires PATCHMAN to be loaded.
Therefore, the server driver can be loaded by following the list as shown
above.
If the required NLM's are in a search path (such as SYS:SYSTEM), only the
following NLM's need to be loaded.
LSLENH.NLM
NE2000.LAN
The LSLENH NLM will auto-load the PATCHMAN NLM. The NE2000 will auto-load
the ETHERTSM. The ETHERTSM will attempt to auto-load the MSM. The MSM will
NOT load on a 3.1x server, but it must be present for the ETHERTSM to auto-
load the MSM31X. After the MSM fails loading, the ETHERTSM will attempt to
auto-load the MSM31X. If there were no errors while auto-loading (besides
the MSM.NLM), the server driver will finish loading. Otherwise, ensure all
required NLM's are in a search path and try again, or load them individual,
as shown in the list of required NLM's.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.