===========================
R E L E A S E N O T E S
===========================
Broadcom ASF Configuration Program
for Windows NT 4.0, Windows 2000
Version 1.10
Copyright (c) 2000 Broadcom Corporation
All rights reserved.
Feb. 22, 2002
CHANGES in v1.10
----------------
- GUI Enhancements.
- Resolved ClearQuest ID:
3348: ASF - ASFConfig reports mis-leading error msg "No Broadcom adapter with ASF Firmware"
CHANGES in v1.09
----------------
(Require BMAPI version 2.2.12 or above.)
- Modify all message strings that need to be localized into String IDs.
- Resolved ClearQuest ID:
2951: ASF - Need change some wording and alignment for ASFConfig GUI.
CHANGES in v1.08
----------------
(Require BMAPI version 2.2.10 or above.)
- Wording of 'ASF enable/disable' is changed to 'ASF enable'.
- SMBus address of a NIC is read only.
- PET check box is removed. It will be enabled internally whenever ASF enabled.
- Wording of 'Parameters' is changed to 'ASF parameters'.
- System ASF info tab is removed.
- When ASF is disabled, ASFConfig will display parameters and gray them out.
- ASFConfig has default selection on first adapter that has ASF firmwware.
- 'Use System ASF table' button goes away.
- Heartbeat timeout value is changed to an edit box instead of a drop down list.
The range will be from 0 to 600 seconds. Default is 60.
- IP address, subnet mask and default gateway will be read only.
- Display ASF Firmware version.
- Resolved ClearQuest ID:
3130: ASFConfig version displays are mismatched.
3168: ASF - ASFConfig should allow only one broadcom Nic enabled
CHANGES in v1.0.7
-----------------
- Modify Tab orders
- Resolved ClearQuest ID:
3115: ASF - SM Bus Address field under ASFConfig should not change the value to 255 if more characters entered
3116: ASF - ASFConfig usability recommendation for IP addresses configuration
3119: ASF _ ASFConfig hang when select ASF Diag without nic driver installed
3121: When NIC is unaccessable for running ASF tests, ASFDiagnostics display pop-up warning window with no information.
3123: ASFConfig is unresponsive (indefinitely) after ASFDiagnostics running tests while NIC is unaccessable.
CHANGES in v1.0.6
-----------------
(Require BMAPI version 2.2.8 or above.)
- Add ASF Diagnostics Tab
- Resolved ClearQuest ID:
2954: ASFConfig incorretly set SM Bus address of adapter when configured from "Network Adapter ASF Configuration" tab.
CHANGES in v1.0.4
------------------
- Require BMAPI v2.2.7 or above.
- Support 5703 and 5702 NICs.
- Fix SEEPROM accessing problem.
- Fix BIOS reading problems.
- Enhancement of GUI.
- Add support for new parameters.
CHANGES in v1.0.3
------------------
- Get around ASF eeprom access problem.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.