Install.ini Driver File Contents (HP3100.zip)

;
; INSTALL.INI
;
; Copyright (c) 1997 JetFax, Inc.  All rights reserved.
;
; Created by Doug Thomas
;
; This file controls where INSTALL.EXE will find language-specific installation
; sets

;
; This section maps between the 3-letter language code that Windows lists in the
; [Intl] sLanguage=xxx
; entry of WIN.INI, and a human-readable language name
[Languages]
dan=Danish
deu=German
eng=English.UK
enu=English
esn=Modern Spanish
esm=Modern Spanish
esp=Castilian Spanish
fin=Finnish
fra=French
frc=Canadian French
isl=Icelandic
ita=Italian
nld=Dutch
nor=Norwegian
ptg=Portuguese
sve=Swedish


;
; This section maps between the language that Windows is running in, and the target
; installation language.  The syntax for this section is:
;
; Windows language=Installation Language
;
[LanguageMap]
Danish=English
German=German
English=English
English.UK=English
Modern Spanish=Spanish
Castilian Spanish=Spanish
Finnish=English
French=French
Canadian French=French
Icelandic=English
Italian=Italian
Dutch=Dutch
Norwegian=English
Portuguese=English
Swedish=English
;
; Each of the sections below corresponds to one installation language.
; The syntax for this section is:
;
; WIN32s=relative\path\to\WIN32s\installation\disk1\setup.exe
; JetSuite=relative\path\to\JetSuite\installation\disk1\setup.exe
; errorNumber= message...
;
; Note that the path is relative to SETUP.EXE, which will typically reside in
; the root directory of a CD-ROM drive (like E:\SETUP.EXE ).
;
; Also DO NOT CHANGE the left-hand side of any of these entries, including the error
; numbers.  Error number strings are provided for localization purposes.
;
[English]
WIN32s=English\Win32s\Disk1\Setup.exe
JetSuite=English\Disk1\Setup.exe
50=JetSuite Install
51=JetSuite Install could not find the following installation program: '%s'.  Install will now terminate.
52=JetSuite Install could not find an entry in the [Languages] section of INSTALL.INI for the current Windows Language whose code is '%s'.
53=JetSuite Install could not find an entry in INSTALL.INI for language '%s', program '%s'.
54=JetSuite is already installed on this machine.  Do you want to run the JetSuite Installer in order to add components or Un-install JetSuite?
55=JetSuite requires the Microsoft Windows 32-bit Extensions known as 'Win32s'.  This will be installed now.  When Win32s installation is complete, after you restart your PC, JetSuite Installation will resume.
56=JetSuite Install cannot open SYSTEM.INI.  JetSuite Install will terminate now.
57=Not enough memory available to run.  Close some applications, and try again.
58=Unable to read from SYSTEM.INI.  JetSuite Install will terminate now.
59=JetSuite requires that file sharing be installed on your system.  JetSuite Install will add sharing, and will then reboot your PC and begin installing the Microsoft Windows 32-bit Extensions.
0=System was out of memory, executable file was corrupt, or relocations were invalid.
2=File was not found.
3=Path was not found.
5=Attempt was made to dynamically link to a task, or there was a sharing or network-protection error.
6=Library required separate data segments for each task.
8=There was insufficient memory to start the application.
10=Windows version was incorrect.
11=Executable file was invalid. Either it was not a Windows application or there was an error in the .EXE image.
12=Application was designed for a different operating system.
13=Application was designed for MS-DOS 4.0.
14=Type of executable file was unknown.
15=Attempt was made to load a real-mode application (developed for an earlier version of Windows).
16=Attempt was made to load a second instance of an executable file containing multiple data segments that were not marked read-only.
19=Attempt was made to load a compressed executable file. The file must be decompressed before it can be loaded.
20=Dynamic-link library (DLL) file was invalid. One of the DLLs required to run this application was corrupt
21=Application requires Microsoft Windows 32-bit extensions.


[German]
;EN 10/3/97 Added German
WIN32s=German\Win32s\Disk1\Setup.exe
JetSuite=German\Disk1\Setup.exe
50=JetSuite Setup
51=JetSuite Setup konnte das folgende Installationsprogramm nicht finden: '%s'. Setup wird jetzt beendet.
52=JetSuite Setup konnte im Abschnitt [Languages] der INSTALL.INI-Datei keinen Eintrag für die aktuelle Windows-Sprache mit dem Code '%s' finden.
53=JetSuite Setup konnte in der INSTALL.INI-Datei keinen Eintrag für Sprache '%s', Programm '%s' finden.
54=JetSuite ist auf diesem Rechner bereits installiert. Möchten Sie JetSuite Installer ausführen, um Komponenten hinzuzufügen oder JetSuite zu deinstallieren?
55=Für JetSuite ist die 32-Bit-Erweiterung von Microsoft Mindows ('Win32s') erforderlich. Diese Erweiterung wird jetzt installiert. Nach Abschluß der Win32s-Installation und einem anschließenden Neustart Ihres PC wird die JetSuite Installation fortgesetzt.
56=JetSuite Setup kann die SYSTEM.INI-Datei nicht öffnen. JetSuite Setup wird jetzt beendet.
57=Nicht genügend Speicher verfügbar, um das Programm auszuführen. Schließen Sie einige Anwendungen, und wiederholen Sie den Vorgang.
58=Aus der SYSTEM.INI-Datei kann nicht gelesen werden. JetSuite Install wird jetzt beendet.
59=Zur Verwendung von JetSuite muß die Dateifreigabe auf Ihrem System installiert sein. JetSuite Setup installiert die Dateifreigabe, startet Ihren PC neu, und leitet die Installation der 32-Bit-Erweiterung für Microsoft Windows ein.
0=Das System hatte nicht genügend Speicher, die Programmdatei war beschädigt oder die Verschiebung war ungültig.
2=Datei wurde nicht gefunden.
3=Pfad wurde nicht gefunden.
5=Es wurde versucht, eine dynamische Verknüpfung zu einer Task zu erstellen, oder es trat ein Freigabe- bzw. Netzwerkschutzfehler auf.
6=Die Bibliothek erforderte separate Datensegmente für jede Task.
8=Es stand nicht genügend Speicher zum Starten der Anwendung zur Verfügung.
10=Falsche Windows-Version.
11=Die Programmdatei war ungültig. Entweder handelte es sich nicht um eine Windows-Anwendung, oder im .EXE-Image lag ein Fehler vor.
12=Die Anwendung wurde für ein anderes Betriebssystem entwickelt.
13=Die Anwendung wurde für MS-DOS 4.0 entwickelt.
14=Der Typ der Programmdatei ist nicht bekannt.
15=Es wurde versucht, eine Standardmodus-Anwendung zu laden (für eine frühere Windows-Version entwickelt).
16=Es wurde versucht, eine zweite Instanz einer Programmdatei zu laden, die mehrere nicht als schreibgeschützt gekennzeichnete Datensegmente enthält.
19=Es wurde versucht, eine komprimierte Programmdatei zu laden. Die Datei muß dekomprimiert werden, bevor sie geladen werden kann.
20=Die DLL-Datei (Dynamic Link Library) war ungültig. Eine der zur Ausführung dieser Anwendung erforderlichen DLLs war beschädigt.
21=Für diese Anwendung ist die 32-Bit-Erweiterung von Microsoft Mindows erforderlich.

[French]
;EN 10/3/97 Added French
WIN32s=French\Win32s\Disk1\Setup.exe
JetSuite=French\Disk1\Setup.exe
50=Installation de JetSuite
51=Le programme d'installation de JetSuite n'a pas trouvé le fichier d'installation suivant : '%s'. L'installation de JetSuite va se terminer maintenant.
52=Le programme d'installation de JetSuite n'a pas trouvé une entrée dans la section [Languages] du fichier INSTALL.INI pour la Langue Windows courante dont le code est '%s'.
53=Le programme d'installation de JetSuite n'a pas trouvé une entrée dans le fichier INSTALL.INI pour la langue '%s', programme '%s'.
54=JetSuite est déjà installé sur ce poste. Voulez-vous lancer le programme d'installation de JetSuite pour ajouter des composants ou désinstaller JetSuite ?
55=JetSuite requiert les extensions Microsoft Windows 32 bits intitulées 'Win32s'. Elles vont être installées maintenant. Une fois l'installation de Win32s terminée, l'installation de JetSuite continuera après le redémarrage du PC.
56=Le programme d'installation de JetSuite ne peut pas ouvrir le fichier SYSTEM.INI. L'installation de JetSuite va se terminer maintenant.
57=Mémoire insuffisante pour lancer l'installation. Veuillez fermer certaines applications, puis essayez à nouveau.
58=Impossible de lire le fichier SYSTEM.INI. L'installation de JetSuite va se terminer maintenant.
59=Il est nécessaire que le partage des fichiers soit installé sur le système pour que JetSuite fonctionne. Le programme d'installation de JetSuite va ajouter le partage, redémarrer le PC, puis installer les Extensions Microsoft Windows 32 bits.
0=Manque de mémoire système, fichier exécutable altéré ou translations impossibles.
2=Fichier introuvable.
3=Chemin d'accès introuvable.
5=Tentative d'affectation de lien dynamique à une tâche ou erreur de partage ou de protection du réseau.
6=Des segments de données séparés pour chaque tâche ont été requis par la bibliothèque.
8=Mémoire insuffisante pour lancer l'application.
10=Version de Windows incorrecte.
11=Fichier exécutable incorrect. Soit il ne s'agit pas d'une application Windows, soit l'image du fichier .EXE contient une erreur.
12=Cette application a été conçue pour un système d'exploitation différent.
13=Cette application a été conçue pour MS-DOS 4.0.
14=Type de fichier exécutable inconnu.
15=Tentative de chargement d'une application en mode réel (conçu pour une ancienne version de Windows).
16=Tentative de chargement d'une deuxième occurence d'un fichier exécutable contenant plusieurs segments de données sans attribut de lecture seule.
19=Tentative de chargement d'un fichier exécutable compressé. Pour pouvoir être chargé, ce fichier doit d'abord être décompressé.
20=Fichier DLL incorrect. L'une des DLL requises pour lancer cette application est altérée.
21=Cette application requiert les extensions Microsoft Windows 32 bits.

[Dutch]
;EN 10/3/97 Added Dutch
WIN32s=Dutch\Win32s\Disk1\Setup.exe
JetSuite=Dutch\Disk1\Setup.exe
50=JetSuite Installatie
51=Het JetSuite Installatieprogramma kan het volgende installatieprogramma niet vinden: '%s'.  de Installatie wordt nu beëindigd.
52=Het JetSuite Installatieprogramma kan geen vermelding vinden in het gedeelte [Languages] van INSTALL.INI voor de huidige Windows-taal met de volgende code: '%s'.
53=Het JetSuite Installatieprogramma kan geen vermelding vinden in INSTALL.INI voor de taal '%s', het programma '%s'.
54=JetSuite is al geïnstalleerd op deze computer.  Wilt u het JetSuite-installatieprogramma uitvoeren om onderdelen toe te voegen of wilt u JetSuite deïnstalleren?
55=JetSuite vereist de 32-bits extensies van Microsoft Windows die 'Win32s' worden genoemd.  Deze worden nu geïnstalleerd.  Als de installatie van de Win32s is voltooid en u de computer opnieuw hebt opgestart, zal de installatie van JetSuite worden hervat.
56=Het JetSuite Installatieprogramma kan SYSTEM.INI niet openen.  Het JetSuite Installatieprogramma wordt nu afgesloten.
57=Er is onvoldoende geheugen beschikbaar om het programma uit te voeren.  Sluit enkele toepassingen en probeer het opnieuw.
58=Kan niet lezen van SYSTEM.INI.  Het JetSuite Installatieprogramma wordt nu afgesloten.
59=JetSuite vereist dat de optie voor bestandsdeling is geïnstalleerd op uw systeem.  JetSuite Install zal de mogelijkheid voor het delen van bestanden toevoegen en vervolgens de computer opnieuw opstarten en beginnen met de installatie van de 32-bits extensies van Microsoft Windows.
0=Het systeem heeft onvoldoende geheugen, het uitvoerbare bestand is beschadigd of de nieuwe locaties zijn ongeldig.
2=Kan het bestand niet vinden.
3=Kan het pad niet vinden.
5=Er is een poging gedaan een dynamische koppeling te maken naar een taak of er is een fout opgetreden bij het delen of bij de netwerkbeveiliging.
6=De bibliotheek vereist afzonderlijke gegevenssegmenten voor elke taak.
8=Er is onvoldoende geheugen om de toepassing te starten.
10=De Windows-versie is niet juist.
11=Het uitvoerbare bestand is ongeldig. Het is geen Windows-toepassing of er zit een fout in de .EXE-afbeelding.
12=De toepassing is ontworpen voor een ander besturingssysteem.
13=De toepassing is ontworpen voor MS-DOS 4.0.
14=Het type van het uitvoerbare bestand is onbekend.
15=Er is een poging gedaan om een "real"-modustoepassing te laden (ontworpen voor een eerdere versie van Windows).
16=Er is een poging gedaan om een tweede exemplaar te laden van een uitvoerbaar bestand met meerdere gegevenssegmenten die niet zijn gemarkeerd als alleen-lezen.
19=Er is een poging gedaan om een gecomprimeerd uitvoerbaar bestand te laden. Het bestand moet worden gedecomprimeerd alvorens het kan worden geladen.
20=Het DLL-bestand (Dynamic-link library) is ongeldig. Een van de DLL-bestanden die nodig is om de toepassing uit te voeren, is beschadigd.
21=De toepassing vereist 32-bits extensies van Microsoft Windows.

[Spanish]
WIN32s=Spanish\Win32s\Disk1\Setup.exe
JetSuite=Spanish\Disk1\Setup.exe
50=Instalación de JetSuite
51=La instalación de JetSuite no pudo encontrar el programa de instalación siguiente: '%s'. La instalación no puede continuar.
52=La instalación no pudo encontrar una entrada en la sección [Languages] en el archivo INSTALL.INI para el idioma actual de Windows, cuyo código es '%s'.
53=La instalación de JetSuite no pudo encontrar una entrada en el archivo INSTALL.INI para el idioma '%s', programa '%s'.
54=JetSuite ya está instalado en este equipo. ¿Desea ejecutar el Instalador KetSuite para añadir componentes o desinstalar JetSuite?
55=JetSuite requiere las Extensiones de 32 bits de Microsoft Windows, conocidas como 'Win32s'. Este componente se instalará ahora. La instalación de JetSuite se reanudará tras finalizar la instalación de Win32s y después de reiniciar su PC.
56=La instalación de JetSuite no puede abrir el archivo SYSTEM.INI. La instalación de JetSuite no puede continuar.
57=No hay memoria libre suficiente para ejecutar el programa. Cierre algunas aplicaciones e inténtelo de nuevo.
58=No se puede leer el archivo SYSTEM.INI. La instalación de JetSuite no puede continuar.
59=JetSuite requiere que la característica de archivos compartidos esté instalada en el sistema. La instalación de JetSuite añadirá la característica de archivos compartidos y reiniciará su PC antes de instalar las Extensiones de 32 bits de Microsoft Windows.
0=El sistema no tenía memoria suficiente, el archivo ejecutable estaba dañado o las reubicaciones no eran válidas.
2=No se encontró el archivo.
3=No se encontró la ruta.
5=Se intentó crear un vínculo dinámico a una tarea o se ha producido un error de archivo compartido o de protección de la red.
6=La biblioteca requiere segmentos de datos independientes para cada tarea.
8=No había memoria libre suficiente para iniciar la aplicación.
10=La versión de Windows no es correcta.
11=El archivo ejecutable no es válido. No es una aplicación para Windows o la imagen .EXE contiene errores.
12=La aplicación fue diseñada para otro sistema operativo.
13=La aplicación fue diseñada para MS-DOS 4.0.
14=No se pudo identificar el tipo de archivo ejecutable.
15=Se intentó cargar una aplicación en modo real (desarrollada para una versión anterior de Windows).
16=Se intentó cargar una segunda copia de un archivo ejecutable que contenía varios segmentos de datos que no estaban marcados para sólo lectura.
19=Se intentó cargar un archivo ejecutable comprimido. Debe descomprimir el archivo para poder cargarlo.
20=El archivo de biblioteca de vínculos dinámicos (DLL) no es válido. Una de las DLLs que se necesitan para ejecutar esta aplicación estaba dañada.
21=La aplicación requiere las Extensiones de 32 bits de Microsoft Windows.

[Italian]
WIN32s=Italian\Win32s\Disk1\Setup.exe
JetSuite=Italian\Disk1\Setup.exe
50=Installazione JetSuite
51=Impossibile trovare il seguente programma di installazione: '%s'. L'installazione verrà terminata.
52=Impossibile trovare una voce nella sezione [Lingue] del file INSTALL.INI per l'attuale lingua di Windows il cui codice è '%s'.
53=Impossibile trovare una voce nel file INSTALL.INI per la lingua '%s', programma '%s'.
54=JetSuite è già installato su questa macchina. Avviare il programma di installazione di JetSuite per aggiungere dei componenti o disinstallare JetSuite?
55=JetSuite richiede le estensioni a 32 bit di Microsoft Windows ('Win32'). L'installazione verrà eseguita ora. Una volta completata l'installazione delle estensioni Win32, dopo aver riavviato il PC, verrà ripristinata l'installazione di JetSuite.
56=Impossibile aprire SYSTEM.INI. L'installazione verrà terminata ora.
57=Memoria insufficiente per l'avviamento. Chiudere alcune applicazioni e riprovare.
58=Impossibile leggere SYSTEM.INI. L'installazione verrà terminata ora.
59=JetSuite richiede che nel sistema sia installata la condivisione dei file. Il programma di installazione di JetSuite aggiungerà la condivisione, riavvierà il PC e inizierà ad installare le estensioni a 32 bit di Microsoft Windows.
0=Memoria di sistema esaurita, file eseguibile danneggiato o riposizionamenti non validi.
2=Impossibile trovare il file.
3=Impossibile trovare il percorso.
5=Tentativo di collegamento dinamico ad un task o errore di protezione della rete o della condivisione.
6=La libreria richiede segmenti di dati separati per ogni task.
8=Memoria insufficiente per avviare l'applicazione.
10=Versione di Windows non corretta.
11=File eseguibile non valido. Applicazione non Windows o errore nell'immagine .EXE.
12=Applicazione concepita per un sistema operativo differente.
13=Applicazione concepita per MS-DOS 4.0.
14=Tipo di file eseguibile sconosciuto.
15=Tentativo di caricare un'applicazione real-mode (sviluppata per una versione precedente di Windows).
16=Tentativo di caricare una seconda istanza di un file eseguibile contenente segmenti di dati multipli non contrassegnati come di sola lettura.
19=Tentativo di caricare un file eseguibile compresso. Il file deve essere decompresso prima di poter essere caricato.
20=File DLL (Dynamic-Link Library) non valido. Una delle DLL necessarie per avviare questa applicazione è danneggiata.
21=L'applicazione richiede le estensioni a 32 bit di Microsoft Windows.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.47