1. CJUNIV1.EXE Driver
2. install.txt File Contents

install.txt Driver File Contents (CJUNIV1.EXE)

Unzip the file CADJET.EXE to a floppy diskette
and follow the directions for your appropriate
operating system.

This disk contains ENCAD Windows drivers for the 
Windows 3.x (3.1/3.11), Windows 95 and Windows 
NT 4.0 operating systems.  Each driver is located 
in the appropriate directory on the disk. To install 
the correct driver for your particular operating
system follow the directions listed below.

For Windows 3.x (3.1 / 3.11)
Insert the diskette into your floppy drive port.
From the 'Main' group select 'Control Panel' then
'Printers' then 'Add'.  Select 'Have Disk' then
type in a:\3x then select 'Install' OR select 
'Browse' then select the '3x' directory of a:\
and select 'OK.

For Windows 95
Insert the diskette into your floppy drive port.
Select 'Start' then 'Settings' then 'Printers' then 
double-click on the 'Add Printer' icon. 
When prompted select 'Have Disk' then type
in A:\95 and select 'OK' OR select 'Browse'
then select the '95' directory of a:\ and
select 'OK'.

For Windows NT 4.0
Insert the diskette into your floppy drive port.
Select 'Start' then 'Settings' then 'Printers' then 
double-click on the 'Add Printer' icon. 
When prompted select 'Have Disk' then type
in A:\NT40 and select 'OK' OR select 'Browse'
then select the 'NT40' directory of a:\ and
select 'OK'.

Version Information:

3x Directory = ENCAD Windows 3.x CADJET Series System Driver v3.2
95 Directory = ENCAD Windows 95 CADJET Series System Driver v1.2
Nt40 Directory = ENCAD Windows NT 4.0 CADJET Series System Driver v1.01