Function 0 Header.pdf and Table 112 - Class Code and Rev ID.pdf are the data that needs to be programmed into the EEPROM. You'll need to generate the binary for this. The format is 32-bit address and 32-bit data. A total of 32 bytes are programmed into the EEPROM here. Data to program to EEPROM 14000CF8 8000002C 14000CFC XXXXXXXX EXAMPLE: 0x1400.0CF8 0x8000.002C 0x1400.0CFC 0xABCD.EFGH These 4 32-bit words perform a PCI config cycle to change the subsystem and vendor ID. In this example, subsystem = 0xABCD vendor ID = 0xEFGH You should define your subsystem and vendor ID.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.