1. OfficeLan10-100_II.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (OfficeLan10-100_II.zip)

   Driver Installation - Banyan VINES for DOS Driver
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

  Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter

  Banyan VINES for DOS Driver
  INSTALLATION GUIDE


=============================================================================
CONTENTS
=============================================================================

*  Important Considerations

*  Files Provided

*  Device Driver Installation Guide

=============================================================================
IMPORTANT CONSIDERATIONS
=============================================================================

*  This driver supports the Siemens OfficeLAN PCI 10/100 TX Fast Ethernet
    Adapters.

*  This driver conforms to the Network Driver Interface Specification (NDIS)
    v2.0.1 defined by Microsoft/3Com. The driver has been tested with
    Microsoft LAN Manager, 3Com 3+Open, IBM LAN Server, IBM PC LAN
    Program, DEC Pathworks, and other NDIS-compatible network operating
    systems and protocol stacks.

*  The PROTOCOL.INI file contains configuration information.

=============================================================================
FILES PROVIDED
=============================================================================

*  L100.DOS            DOS NDIS2 drivert
*  PROTOCOL.INI        Driver binding information and operational parameters

=============================================================================
DEVICE DRIVER INSTALLATION GUIDE
=============================================================================

The following example creates a boot diskette for a Banyan client workstation
that uses an LAN adapter and L100.DOS NDIS driver.

1.  Copy the files L100.DOS and PROTOCOL.INI from the A:\NDIS\DOS
     subdirectory on the ConfigDisk to the subdirectory in which the VINES
     software is installed.

2.  Execute the PCCONFIG utility from the workstation. This utility requires
     VINES v4.02 or later.

3.  Select Network Card Setting from the Main Menu. When the list of options
      appears, select NDIS Ethernet.

      Select the PROTOCOL.INI BINDINGS= parameter, and specify L100_NIF

4.  Press F10 to save and return to the Main Menu.

5.  Select Login Environment Setting from the Main Menu.

6.  Press F10 to save.

7.  Make the following modifications to the CONFIG.SYS file:

     device = c:\banyan\protman.dot/i:c:\banyan
     device = c:\banyan\L100.DOS

8.  Make the following modifications to the PROTOCOL.INI file, located in
     the \BANYAN directory:

    [PROTOCOL MANAGER]
    Drivername = Protman$

    [L100_NIF]
    Drivername = L100$
    SLOT=1
    MEDIA_MODE = AUTODETECT
    NETADDRESS=#000000000000

    [VINES_XIF]
    Drivername = netbeui$
    Bindings = L100_NIF

    You can now use this diskett to connect your workstation to the server.

9.  Reboot your system.

=============================================================================

This software and documentation have restricted rights: their use, duplication,
or disclosure by the Government is subject to the restrictions in:

*  DFARS 252.227-7013
    Subparagraph (c) (1) (ii)
    Rights in Technical Data and Computer Software clause

*  FAR 52.227-14
    Alternate III
    Rights in Data -- General clause

*  FAR 52.227-19
    Subparagraphs (c) (1) and (2)
    Commercial Computer Software -- Restricted Rights clause


Other product and company names are registered trademarks or trademarks of
their respective holders.