NWOS2ODI.TXT Driver File Contents (OfficeLan10-100_II.zip)

   Driver Installation - for Novell OS/2 ODI Client
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

   Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adapter

   (1) Introduction:
   -----------------
       This document describes the procedures to install Novell OS/2 ODI
       driver for Siemens OfficeLAN PCI 10/100 TX Fast Ethernet Adaper.


   (2) Location of Driver:
   -----------------------
          \NETWARE\CLIENT\OS2\FEOS2ODI.SYS


   (3) Installing Driver Procedures:
   ---------------------------------

      1. Make the OS/2 requester diskette from Novell Server CD-ROM.

      2. Put the disketter labeled WSOS2_1 to drive A:, and run install.exe.

      3. Choose the "Requester on workstation" item from "Installation" menu
         to install the OS/2 requester.

      4. Specify the target directory and follow the instructions on screen to
         complete the installation process.(User can choose NE2000.SYS driver
         for completing the installation)

      5. Copy the driver(feos2odi.sys) and net.cfg located at directory:
         NETWARE\CLIENT\OS2 in diskette to the OS/2 requester directory.

      6. Modify config.sys by rename NE2000.SYS to FEOS2ODI.SYS, such as:
         DEVICE=C:\NETWARE\feos2odi.sys

      7. Choose "The workstation" item from configuration menu to edit
         the sample net.cfg file. Please refer to the following section for
         driver parameters.

      8. Reboot the OS/2, then use Novell tools to logon the network.

   (4) Parameters:
   ---------------
   The following parameters can be placed under "LINK DRIVER FEOS2ODI" entry
   in net.cfg file.

   FRAME ETHERNET_802.2
   FRAME ETHERNET_802.3
   FRAME ETHERNET_SNAP
   FRAME ETHERNET_II
   Mode 0
                ;Default: 0 - AUTOSENSE
                ;0 - AUTOSENSE
   NODE ADDRESS 1234567890AB
   TX_FIFO_THRESHOLD 4
                ;0 - 72  bytes
                ;1 - 96  bytes
                ;2 - 128 bytes
                ;3 - 160 bytes
                ;4 - Store & Forward

   ;SLOT 16
                    ;Specify slot number, start from 16 for PCI bus.
                    ;Auto scan if not specify

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.87