1. Dynex_DX-E201_driver_manual.exe Driver
2. LINUX.TXT File Contents

LINUX.TXT Driver File Contents (Dynex_DX-E201_driver_manual.exe)

Linux driver for kernel 2.2.X

Installation on Linux:
----------------------
1. Compile the source code :

 ->Copy the source code DXE201 (Ver 1.11a above) to a directory
   and execute
   "gcc -DCARDBUS -DMODULE -D_KERNEL_ -Wall -Wstrict-prototypes -O6 -c 
   DXE201 -o DXE201.o -I/usr/src/linux/pcmcia-cs-3.0.9/include/
   pcmcia/"
   
   The directory "pcmcia-cs-3.0.9" stands for the card service version you 
   use. Please change it to the version on your system in order to include 
   proper .h file. The final file is DXE201.o

2. Copy driver :

 ->Copy the file "DXE201.o" to "/lib/modules/2.2.14-5.0/pcmcia"
 
   The directory "2.2.14-5.0" stands for the Linux kernel version you use.

3. Edit config:
 ->Add 5 lines to the file "/etc/pcmcia/config"
   
   #
   # Device driver definitions
   #
  
   device "DXE201"                                   (==>Add 1/5)
     class "network" module "cb_enabler", "DXE201"   (==>Add 2/5) 


   :
   :

   #
   # CardBus Cards
   #

   card "Dynex DX-E201 CardBus PC Card"                                      (==>Add 3/5)
     manfid 0x0149, 0x0000                           (==>Add 4/5)
     bind "DXE201"                                    (==>Add 5/5)

   
   The values 0x0149, 0x0000 are JEDEC ID and can be read by typing 
   "cardctl ident" on console with one card on socket.
	          

4. Edit linuxconf
 ->Type "linuxconf" and choose "Config"-->"Networking"-->"Client tasks"-->
   "Basic host information". Select an adapter, enable it, and type 
   "DXE201" on "Kernel module" and "eth0" (or eth1, eth2) on 
   "Net device". Click on "Accept" button and "Act/change" button.


5. Restart the computer.

6. More information about kernel compile:
   http://metalab.unc.edu/mdw/HOWTO/Kernel-HOWTO.html
  
   More information about install: man pcmcia