***************************************************************************** * * * 32-Bit 10M PCI Ethernet Adapter * * * * Ethernet Driver for SCOUNIX 5.0 * * * ***************************************************************************** Installation: ============= 1. Login as root user. (On system maintenance mode) 2. Put network driver diskette to floppy A: and use doscp command to copy the file "setup" for installing SCO UNIX Network Driver into UNIX's directory. # cd / # doscp a:/sco/5.x/setup /setup # chmod +x setup # ./setup Install 32-Bit 10M PCI Ethernet Adapter Driver Please input source path ? ( ex: a:/sco/5.x )==> a:/sco/5.x ^^^^^^^^^^ (VOL.000.000 file will be created in the /tmp directory) 3. Run custom to enter software manager procedure. From the menu select: Software -> Install New -> From scosysv (i.e. local host) -> Media Device (select "Media Images") -> keyin full path for "Image Directory" (i.e. /tmp) The "32-Bit 10M PCI Ethernet Driver (w940s) (ver 1.0.0)" message will appear. Select "Install". When custom has completed, quit custom. 4. Use netconfig utility to add LAN adapter. # netconfig 5. To add adapters, select "Add new LAN adapter" from "Hardware". The message "Select network adapter to be added:" will appear and select "32-Bit 10M PCI Ethernet Adapter Driver (w940s)". 6. "Network Driver Configuration" will appear. Please use arrow key to fill the configuration of your PCI adapter. Enter the configuration of 32-Bit 10M PCI Ethernet Adapter (w940s): | Device#: | | 0 __________________|v| | you can set the Device# to select some specified board. if you do not make sure this value, you do not change the value, continue the installation, this driver will search PCI Ethernet card automatically. when you finish the setting, press [Continue] buttom, 7. Select SCO TCP/IP to add protocol. 8. Enter the required information and use [TAB] key to press "OK" Local Host Name: |scosysv_____________| IP Address: |192.72.24.55________| Netmask: |255.255.255.0_______| Broadcast Address: |192.72.24.255_______| Domain Name: |scosysv.com_________| TCP connections: |1024________________| Pseudo ttys: |64__________________| 9. At "Hardware" menu select "Exit" to quit the netconfig utility. 10. Do you want to relink to kernel now ? y 11. Do you want this kernel to boot by default (y/n) y 12. Do you want the kernel environment rebuilt (y/n) y 13. Reboot unix. # shutdown -y -g0 ---- All trademarks or brand names mentioned are properties of their respective companies.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.