1. gts-h05u09s-9916h.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (gts-h05u09s-9916h.zip)

*****************************************************************************
*                                                                           *
*                       32-Bit 10M PCI Ethernet Adapter                     *
*                                                                           *
*                      Ethernet Driver for SCOUNIX 3.2.4                    *
*                                                                           *
*****************************************************************************

Installation:
=============

  1. Login as root user. (On system maintenance mode)

  2. Put network driver diskette to floppy A: and use doscp command
     to copy the file "install" for installing SCO UNIX Network Driver
     into UNIX's directory.

     # cd /
     # doscp A:/sco/3.x/setup /setup
     # chmod +x /setup
     # ./setup

     Install 32-Bit 10M PCI Ethernet Driver...
     Please input source path ? ( ex: a:/sco/3.x )==> a:/sco/3.x
                                                      ^^^^^^^^^^
  3. Use netconfig utility, available options :

     # netconfig

     The screen will display the following messages, and Select
     item (1) to Add a chain  :

     1) Add a chain
     2) Remove a chain
     3) Reconfigure an element in a chain
     4) Quit

  4. After the above option completed, the screen display next option
     messages :

     Select item ( ) : sco_tcp   SCO TCP/IP for UNIX

  5. When the user completed the above option, then various adapter
     drivers in SCO UNIX occur and select "32-Bit 10M PCI Ethernet
     Adapter Driver, Board 0" item.

  6. Add chain sco_tcp -> w940s30 (y/n),   TYPE 'y'

  7. Enter the internet Address of this interface,
     for example : 192.72.24.55

  8. Enter the netmask for this interface (default 255.255.255.0).

  9. Does the interface use a broadcast address of all 1's (y/n),
     default : y

 10. Enter the boardcast address for this interface,
     default : xxx.xx.x.255             press ENTER

 11. Are these values correct ? (y/n)   TYPE 'y'

 12. Pseudo ttys are currently configured, do you want to:

        1) Add Pseudo ttys
        2) Remove Pseudo ttys
        Select an option or enter q to quit [q]   TYPE 'q'

     TCP connections currently configured, do you want to:

        1) Add TCP Connections
        2) Remove TCP Connections
        Select an option or enter q to quit [q]   TYPE 'q'

 13. Available options:

        1) Add a chain
        2) Remove a chain
        3) Reconfigure a element in a chain
        q. Quit

     Select option: q

 14. Do you want to relink to kernel now ?               y

 15. Do you want this kernel to boot by default (y/n)    y

 16. Do you want the kernel environment rebuilt (y/n)    y

 17. Reboot unix.

         # shutdown -y -g0

----
All trademarks or brand names mentioned are properties
of their respective companies.