1. rtl8139d.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (rtl8139d.zip)

               **************************************************
                      Realtek Rtl8139D Based Fast Ethernet Card
                                 
                     Packet Driver for DOS Installation Guide
               **************************************************

-----------------------
Installation Procedure 
-----------------------
				
Introduction:

  This document describes the procedure to setup the Packet driver for
  REALTEK RTL8139D PCI Fast Ethernet Adapter.

  Location of Driver:     \PKTDRV\MTDPKT.COM


Usage:

  Load the packet driver using the software interrupt and any
  optional command line switches if required.

  Usage: MTD80X [-u] <software_int_no> [media]

  Example: MTD80X 0x60

  The only required parameter is the software interrupt.  A packet
  driver needs to have a software interrupt assigned to it for other
  programs to access it.

  If you need any of the options listed below, place them before the
  software interrupt on the command line.

    -u           : Unload this driver".

    packet_int_no: Set software interrupt for this driver.
                   The value range is from 0x60 to 0x80.

    media        : Set the line speed and fullduplex function.
                   The possible values are:

                   auto    = enable autonegotiation
                   10half  = force to 10M, half duplex
                   10full  = force to 10M, full duplex
                   100half = force to 100M, half duplex
                   100full = force to 100M, full duplex


Histories of Release:

  ***) 1.00,  08-09-1999
         First release.

  ***) 1.10,  04-24-2000
         For the PHY issue.
         Change driver name to MTDPKT.COM.

  ***) 2.00,  06-27-2000
         For MTD800, MTD803 and MTD891.

  ***) 2.10,  07-05-2000
         For RSAN issue.

  ***) 2.20,  07-10-2000
         For medium changes issue.

  ***) 2.30,  07-25-2000
         Verify the driver for MTD800+MTD981 demo board.

  ***) 2.40,  07-25-2000
         Verify the driver for plug/play problem at runtime.

  ***) 2.60,  09-01-2000
         Verify the driver for OEM issue.
         Delete polling link status action.

  ***) 2.70,  10-04-2000
         Add to handle the length of type is zero case.

  ***) 2.90,  01-18-2001
         Modify for fatal bus error issue.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.