PLANEX GN-1000SX Giga-Ether Adapter Installation
for Windows 98
Getting Started
---------------
The Windows 98 installation disks or CD are need to complete this
install.
Windows 98 Installation Procedure
---------------------------------
1. Make sure your computer is power-off.
2. Plug the adapter into one PCI slot of your computer.
3. Turn on the power. Your computer should be booting.
4. Windows 98 will find new hardware, and
"Add New Hardware Wizard" will appear.
5. Insert the driver diskette into the floppy disk, and
press "Next", and "Next" again in the following window.
6. Select "Floppy disk drives" in the checkbox, and press "Next"
to continue.
Note: Please check "Specify a location" and specify the path
(A:\WIN98), (A: is floppy drive)
or
(D:\WIN98), if use CD. (D: is CD drive)
7. The wizard should found the driver now. Follow the direction
to complete installation.
8. After finishing the installation, the Windows system will ask
you to restart the system. Select "YES" to reboot.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.