;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; File: IRDASMC.INF
;
; INF to install SmcIrda.Sys NDIS 5.0 Miniport for SMC IrCC
; on Windows 2000 and Windows XP
;
; Copyright 1997 - 2002 Standard Microsystems Corp.
; (nw)
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; 12/11/02 (yo)
; INF only update for V.5.1.3600.3.
;
; SMCF010 is golden HW.
; SMCF020 device has SiS/VIA chipset, adds RxForceDrq reg key.
; SMCF030 forces HP transceiver and gives an user no other choice.
; SMCF031 forces IBM transceiver and gives an user no other choice.
; SMCF032 forces SHARP transceiver and gives an user no other choice.
; SMCF033 forces VISHAY transceiver and gives an user no other choice.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; yo v3600 3/13/2002
; EVB portion was removed.
; NEC PnP installation was added.
; Note that both SMC & NEC installation shares services section
; because multiple services can not have the same binary as
; ServiceBinary according to ChkInf tool from DDK.
; Win9x directives (DeviceID, MaxInstance) were removed.
; WinXp directive (NCF_HAS_UI) was added.
; Coinstaller directive was deleted.
; DelFiles section was not used and was deleted.
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
[version]
CatalogFile=irdasmc.cat
;LayoutFile=layout.inf ; should only use this if installing as part of OS
signature="$Windows NT$"
Class = Infrared
ClassGUID = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F}
provider=%strSMC%
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[DestinationDirs]
DefaultDestDir=12 ; %windir%\system32\drivers
SysCopyFiles=12
[Manufacturer]
%strSMC%=SMC_IRCC
%strNEC%=NEC_IRCC
[ControlFlags]
ExcludeFromSelect=*SMCF010
ExcludeFromSelect=*SMCF020
ExcludeFromSelect=*SMCF030
ExcludeFromSelect=*SMCF031
ExcludeFromSelect=*SMCF032
ExcludeFromSelect=*SMCF033
ExcludeFromSelect=*NEC9151
[SMC_IRCC]
%*SMCF010.DeviceDesc%=*SMCF010.ndi, *SMCF010
%*SMCF020.DeviceDesc%=*SMCF020.ndi, *SMCF020
%*SMCF030.DeviceDesc%=*SMCF030.ndi, *SMCF030
%*SMCF031.DeviceDesc%=*SMCF031.ndi, *SMCF031
%*SMCF032.DeviceDesc%=*SMCF032.ndi, *SMCF032
%*SMCF033.DeviceDesc%=*SMCF033.ndi, *SMCF033
[NEC_IRCC]
%*NEC9151.DeviceDesc%=*NEC9151.ndi, *NEC9151
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; SMCF0xx Block
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,AUTODETECT.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[*SMCF020.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF020.ndi.reg,AUTODETECT.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[*SMCF030.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF030.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[*SMCF031.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF031.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[*SMCF032.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF032.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
[*SMCF033.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF0xx.ndi.reg,*SMCF0xx.ndi.param,*SMCF033.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/11/2002, 5.1.3600.3 ; INF date is newer than binary's
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; SMCF0xx -- common for all PnP ID
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0xx.ndi.reg]
HKR,Ndi,Service,0,"SMCIRDA"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"
;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strSmcIrdaHelp%
[SMC_DelReg]
HKR,,EnumPropPages32
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Special section for SMCF020
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF020.ndi.reg]
;
; SiS & VIA DMAC Options
;
; RxForceDrq: Any TRUE value enables Force Drq when RX is enabled.
;
HKR,,RxForceDrq,0,"1" ; Only for SiS & VIA chipset.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Parameters Section -- part of AddReg on Install
; Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Infrared Transceiver Selection
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Do auto detection and give user choice
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[AUTODETECT.ndi.param]
; If AUTO [default], then driver will auto-detect at initialization,
; which will produce a single spurious Tx pulse if HP/Sharp.
; This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Force HP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF030.ndi.param]
;
; Infrared Transceiver Selection
;
; For SMCF030, just add RxSel reg and select HP.
;
HKR,,RxSel,,"2" ; force HP.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Force IBM
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF031.ndi.param]
;
; For SMCF031, just add RxSel reg and select IBM.
;
HKR,,RxSel,,"1" ; force IBM.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Force SHARP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF032.ndi.param]
;
; For SMCF032, just add RxSel reg and select SHARP.
;
HKR,,RxSel,,"3" ; force SHARP.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Force VISHAY
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF033.ndi.param]
;
; For SMCF033, just add RxSel reg and select VISHAY.
;
HKR,,RxSel,,"4" ; force VISHAY.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; SMCF0xx -- common for all PnP ID
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF0xx.ndi.param]
;
; IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.
;
; Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.
;
; IrDA Speed enables
;
; bit=1 enables corresponding speed, 1FF is all speeds [default])
;
; d0 = 2400 d4 = 57600 d8 = 4000000
; d1 = 9600 d5 = 115200
; d2 = 19200 d6 = 576000
; d3 = 38400 d7 = 1152000
;
; Note: Miniport will always enable 9600,
; no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; NEC9151 Block
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi]
DelReg=NEC_DelReg
AddReg=*NEC9151.ndi.reg,*NEC9151.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=11/05/2002, 5.1.3600.3
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.reg]
;HKR,Ndi,Service,0,"NECIRDA"
HKR,Ndi,Service,0,"SMCIRDA"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"
;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strNECIrdaHelp%
[NEC_DelReg]
HKR,,EnumPropPages32
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Parameters Section -- part of AddReg on Install
; Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.param]
;
; Infrared Transceiver Selection
;
; If AUTO [default], then driver will auto-detect at initialization,
; which will produce a single spurious Tx pulse if HP/Sharp.
; This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.
;
; IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.
;
; Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.
;
; IrDA Speed enables
;
; bit=1 enables corresponding speed, 1FF is all speeds [default])
;
; d0 = 2400 d4 = 57600 d8 = 4000000
; d1 = 9600 d5 = 115200
; d2 = 19200 d6 = 576000
; d3 = 38400 d7 = 1152000
;
; Note: Miniport will always enable 9600,
; no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Services Section
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF020.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF030.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF031.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF032.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF033.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*NEC9151.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[SMCIRDA.AddService]
DisplayName=%*SMCF0xx.ServiceDesc%
ServiceType=1 ; SERVICE_KERNEL_DRIVER
StartType=3 ; SERVICE_DEMAND_START
ErrorControl=1 ; SERVICE_ERROR_NORMAL
ServiceBinary=%12%\smcirda.sys ; where the driver is
; Note: the same bin can not be used
; in multiple services
LoadOrderGroup=NDIS
[common.EventLog]
AddReg=common.AddEventLog.reg
[common.AddEventLog.reg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\netevent.dll;%%SystemRoot%%\System32\Drivers\SmcIrda.Sys"
HKR,,TypesSupported,0x00010001,7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; File/Directory Sections
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[SysCopyFiles]
smcirda.sys,,,2 ; Do not skip file
; SourceDisksNames not required if installing as part of OS
[SourceDisksNames]
;1=%strDiskName%,%fileTagFile%,
1=%strDiskName%,,,
; Specifies the location of each file referencing the
; [SourceDisksNames] section
[SourceDisksFiles]
smcirda.sys = 1
; smcirda.inf = 1
; irdasmc.cat=1 ; required by WHQL in case of Win9x
; not to have, required by ChkInf in case of Win2K or later
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Localizable Strings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[strings]
strSMC="SMC"
*SMCF010.DeviceDesc="SMC IrCC - Fast Infrared Port" ; GOLDEN
*SMCF020.DeviceDesc="SMC IrCC - Fast Infrared Port SP1" ; SiS/VIA chipset
*SMCF030.DeviceDesc="SMC IrCC - Fast Infrared Port (a)" ; Agilent IR
*SMCF031.DeviceDesc="SMC IrCC - Fast Infrared Port (i)" ; IBM IR
*SMCF032.DeviceDesc="SMC IrCC - Fast Infrared Port (s)" ; SHARP IR
*SMCF033.DeviceDesc="SMC IrCC - Fast Infrared Port (v)" ; Vishay IR
*SMCF0xx.ServiceDesc="SMC IrCC Miniport Device Driver"
strSmcIrdaHelp="The SMC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."
strNEC="NEC"
*NEC9151.DeviceDesc="NEC IrCC - Fast Infrared Port"
; *NEC9151.ServiceDesc="NEC IrCC Miniport Device Driver"
strNECIrdaHelp="The NEC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."
strDiskName="SMC IR_NDIS"
fileTagFile="SmcIrda.Tag" ; is this still used?
strRXSEL="Infrared Transceiver Type"
strIRDATURNTIME="Min. Turn-Around Time"
strMAXSPEED="Speed Limit"
strRXSEL_0="AUTO [Default]"
strRXSEL_1="IBM / Infineon / Temic"
strRXSEL_2="HP"
strRXSEL_3="Sharp"
strRXSEL_4="VISHAY Telefunken"
strMinTurnTime_500=" 0.5 mS"
strMinTurnTime_1000=" 1.0 mS [Default]"
strMinTurnTime_5000=" 5.0 mS"
strMinTurnTime_10000="10.0 mS"
strMaxSpeed_1=" 9.6 kbps"
strMaxSpeed_2=" 19.2 kbps"
strMaxSpeed_3=" 38.4 kbps"
strMaxSpeed_4=" 57.6 kbps"
strMaxSpeed_5=" 115.2 kbps"
strMaxSpeed_6=" 576 kbps"
strMaxSpeed_7="1.152 Mbps"
strMaxSpeed_8="4 Mbps"
V_CLASSNAME="Infrared Adapters"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.