************************************ LSI Logic MegaRAID Driver Release ************************************ Release date: 12/13/04 Supported Controllers: ================ MegaRAID SCSI 320-0 MegaRAID SCSI 320-1 MegaRAID SCSI 320-2 MegaRAID SCSI 320-0X MegaRAID SCSI 320-2X MegaRAID SCSI 320-4X MegaRAID SCSI 320-2E MegaRAID SATA 150-4 MegaRAID SATA 150-6 MegaRAID SATA 300-4x MegaRAID SATA 300-8x Component: ========= Openserver SCSI MegaRAID Driver, Version 2.24 Release Date: 12/13/2004 Products Supported: MegaRAID Controllers Version Numbers: Component Current Version Previous Version =============== ================ Openserver MegaRAID Driver 2.24 Bug Fixes: 5 ========== 1. You can actually configure the physical drive form the controller in the OS 2. Fix for more than 30 LD support 3. When SMP 1.1.1.ga loaded on SCO Open Server 5.06, re-linked and system re-booted. *The amirdmon will start up with no panic* 4. Made the changes in the intr routine. The changes are: *Take off the sleep and wakeup implementation *For the spited cmd a. if the status returned from FW for the first part of the cmd is error, don’t fire the second part and callback to OS with the error status. b. For the good return: sending the second part of the cmd and wait for the second part of the cmd to finish, then callback to OS 5. The Open Server Driver didn’t support the IOCTL cmd (0xF1) which is get PCI Information required by GAM utility. The Driver added this support Enhancements: 0 ============= 1. None Component Features: 0 =================== 1. NONE Known Restrictions: 1 =================== 1. Guide line for SMP package on the system with multi-procsssors. If you are installing the O/S on the system with multi CPUs, you may want to select customize option during installation. With this selection, system will install SMP package that enhance system over all performance Known Bugs: 0 =========== 1. None Installation Notes: 1 =================== 1. Installation Package (AFS filesystem) that contains - amird (HBA driver). Also when you use "mkdev hd" to add the devices to the system, the device mapping table should be used. The mapping table: for logical Drives configure: channels=actual physical channel+(0, 1, 2, 3), target=0 - 15 (escape id 7), lun=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.