OEMSETUP.INF Driver File Contents (ue1205d.zip)

; OEMSETUP FILE FOR DM9 based Ethernet adapters
;     Windows NT v3.51
;     Windows NT v4.0
;
;     Supported adapters:
;         DAVICOM DM9 PCI Fast Ethernet Controller
;
; DAVICOM Semiconductor Inc.
;
;
; Usage:
;
;     This file is the installation/configuration/deinstallation
;     procedure of the DAVICOM DM9 driver for Windows NT.  It can be called
;     from Windows Setup directly, or via the Windows NT Networks
;     Control Program Applet (NCPA) from inside the Windows
;     Control Panel.
;
;----------------------------------------------------------------------------------------
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    DM9102
[ConnectionChoicesDM9102]
    Connect_0 = "AutoSense", 0
    Connect_2 = "100 Mbps", 2
    Connect_3 = "100 Mbps Full_Duplex", 4
    Connect_4 = " 10 Mbps", 1
    Connect_5 = " 10 Mbps Full_Duplex", 3

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "DAVICOM Semiconductor, Inc."
ProductMajorVersion     = "2"
ProductMinorVersion     = "21"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

VendorID = 4738  ;; 1282 Vendor Identification
;DeviceID = 37120  ;; 9100 Device Identification
;DM9102ID = 37122  ;; 9102 Device Identification
DM9102ID = 36873  ;; 9009 Device Identification

ProductSoftwareName     = "DM9PCI"
ProductSoftwareTitle    = "10/100 Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DM9ETH4.sys"
NetRuleSoftwareType     = "DM9PCISys ndisDriver DM9PCIDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """DM9PCISys"" yes no container"
NetRuleSoftwareClass    = {"DM9PCIDriver basic"}
NetRuleSoftwareSWBindable = {"DM9PCIDriver DM9102Adapter non exclusive 100"}

OptionHelpFile = "DMLAN.HLP"
ProductHardwareName = "DM9PCI"


ProductHardwareDM9102Title = "10/100 PCI Ethernet Adapter "
NetRuleHardwareDM9102Type  = "DM9102 DM9102Adapter"
NetRuleHardwareDM9102Class = {"DM9102 Adapter basic"}
AdapterDM9102Type = 5   ;; PCI board
HelpDM9102Id = 30
;DM9100PCIID = 2432701058 ;; 0x91001282 VendorID+DeviceID
;DM9102PCIID = 2432832130 ;; 0x91021282 VendorID+DeviceID
DM9102PCIID = 2416513666 ;; 0x90091282 VendorID+DeviceID


NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)                ;Adapter Name
    set SrcDir   = $($2)                ;Source Directory
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
        install "Install-Hlp"
    endif
   goto installproduct
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
       set ConnectionIndex = $(Combo1Out)
       ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
       set CommonStatus = STATUS_USERCANCEL
       ui pop 1
       goto end
    else
       ui pop 1
       goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
       goto updateparameters
    endif
installproduct =+
    StartWait
;;;;;;;;
;	set-div DeviceID = $(DM9102PCIID) 65535
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DM9102ID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif
    ifstr(i) $($R0) == {}
         set Error = $(CANNOT_FIND_ANY_CARD)
         set CommonStatus = USER_CANCEL
         set from = end
         goto nonfatal
    endif
    set AdapterList = $($R0)

    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif
    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)
                Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                    $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                ifstr $($R0) != "NO_ERROR"
                    set Error = $($R0)
                    goto fatal
                endif
                ifstr(i) $($R1) != "YES"
                    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
                    ifint $($R4) != -1
                        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                    endif
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set RegistryErrorIndex = $($R0)
                    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                         EndWait
                         CloseRegKey $($R1)
                         CloseRegKey $($R2)
                         CloseRegKey $($R3)
                         goto fatalregistry
                    endif
                    read-syms FileDependentDlg$(!STF_LANGUAGE)
                    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
                    ui start "InputDlg"
                    ifstr(i) $(DLGEVENT) == "CONTINUE"
                         set ConnectionIndex = $(Combo1Out)
                         ui pop 1
                    else-ifstr(i) $(DLGEVENT) == "BACK"
                         set CommonStatus = STATUS_USERCANCEL
                         ui pop 1
                         goto end
                    else
                         ui pop 1
                         goto end
                    endif
                    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
                    Set HardNetCardKey      = $($R1)
                    Set HardNetRuleKey      = $($R2)
                    Set HardParameterKey    = $($R3)
                    set AdapterNumber = $($R4)
                    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                        {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                        {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                         goto ShellCodeError
                    endif
                    set BusTypeNum = 5
                    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                        {AdapterPCIID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)PCIID)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif

                    ifint $($(Option)PCIID) == $(DM9102PCIID)
                        set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),0},+
                                            {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),512}}
                        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                        ifint $($ShellCode) != $(!SHELL_CODE_OK)
                            goto ShellCodeError
                        endif
                    endif

                    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
                    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
                    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                    CloseRegKey $(HardNetCardKey)
                    CloseRegKey $(HardNetRuleKey)
                    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                        {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                        {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    CloseRegKey $(HardParameterKey)
                endif
        endif
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "10/100 PCI Ethernet Adapter Driver"
    
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-DM9102]
1,DM9ETH4.SYS , SIZE=999
[Files-Hlp]
1,DMLAN.HLP , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]                                       
;OEM
    DM9102  = "10/100 PCI Fast Ethernet MAC"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

;OEM
ProductSoftwareDescription = "10/100 PCI Ethernet Adapter Driver"

FunctionDM9102Title = "PCI Fast Ethernet Adapter Setup"
ProductHardwareDM9102Description = "10/100 PCI Ethernet Adapter"


ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgText = "Select the proper connection type for "+
          "the work adapter. Press help can get "+
          "the function's explanation of each "+
          "connection type."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 30
MaxHelpId = 1150
HelpContext = $(Help$(Option)Id)


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.95