readme.txt Driver File Contents (

The follow paramenters are used in AUTOEXEC.NCF file of Novell Server to 
setup the DM9102AF/DM9102F/DM9009/DM9102AF+DM9801/DM9102AF+DM9802 adapter
(10/100 Fast Ethernet,10 Ethernet,1/10/100 Fast Ethernet LongRun/HomeRun)
           Media Mode : the default is AUTODETECT. (AUTODETECT, AUTOFULL,
                        AUTOHALF, 100FULL, 100HALF, 10FULL, 10HALF, 1M,
                        1MHSLP, 1MHSHP, 1MLSLP, 1MLSHP)
    Rx Remote Command : the default is Disable Rx Remote Command.
                        (Set RXCMD to Enable Rx Remote Command)
  Send Remote Command : the default is Disable Send Remote Command.
                        (Set SENDCMD to Enable Send Remote Command)
      Rx Flow Control : the default is Disable Rx Flow Control.
                        (Set RXFLW to Enable Rx Flow Control)
      Tx Flow Control : the default is Disable Tx Flow Control.
                        (Set TXFLW to Enable Tx Flow Control)
          Virtual LAN : the default is Disable VLAN function.
                        (Set VLAN to Enable VLAN function)
           Line Speed : the default is Autodetect Ethernet Line Speed. 
           ps:SPEED=500,1400,1600 for LongRun/HomeRun to setup speed.
<<< End of file >>>

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.02