NW50.TXT Driver File Contents (ue1205d.zip)

[                     DAVICOM Semiconductor Inc.                     ]
[                  PCI Fast Ethernet Adapter (DM9102)                ]
[                 32-Bit ODI Driver Installation Guide               ]
[                                                                    ]
[          (C) Copyright 1997-2000 DAVICOM Semiconductor Inc.        ]
[                         All Rights Reserved.                       ]

DM9102 supports the 32-Bit ODI Driver (SPEC. v3.31) (DM9PCI.LAN)
for all version Netware Server and Client 32 for DOS/Windows 95/
Windows 3.1.

Topics :

     I. Netware 5.0 Server 32-Bit ODI Driver Installation

Files Description :

  \NW50\DM9PCI.LAN      DM9102 32-Bit ODI Driver (Spec. v3.31)
  \NW50\DM9PCI.LDI      DM9102 32-Bit ODI Driver Installation File
  \NW50\NW4X\           Updated Modules Files for Netware 4.x
  \NW50\NW312\          Updated Modules Files for Netware 3.12
  \NW50\NW50.TXT        This file.

I. Netware 5.0 Server 32-Bit ODI Driver Installation

      1. Turn OFF your PC machine.
      2. Plug the DM9102 PCI Fast Ethernet Adapter into the PCI slot
         of PC machine.
      3. Startup your Netware 5.0 Server.
      4. Run "LOAD NWCONFIG" on Netware console.

           NW50: LOAD NWCONFIG

      5. Select "Driver options" in the Installation Options.
      6. Select "Configure network drivers" in the Driver Options.
      7. Select "Select a driver" in the Additional Driver Actions.
      8. Press <Insert> key to install an unlisted driver.
      9. Press <F3> key to specify a different path.
     10. Insert the Driver diskette to the floppy (Drive A) and
         enter "A:\NW50" to specify a directory path.
     11. Select "DAVICOM PCI Fast Ethernet Adapter (DM9102) 32-Bit ODI
         (SPEC v3.31) MLID" to install.
     12. Enter the HIN Slot Number to the Slot field of the driver parameters.
     13. Choose the driver optional parameters (Media Mode, Line Speed),
         if NO value, it will be the default value.

           Media Mode : the default is AUTODETECT. (AUTODETECT, AUTOFULL,
                        AUTOHALF, 100FULL, 100HALF, 10FULL, 10HALF, 1M,
                        1MHSLP, 1MHSHP, 1MLSLP, 1MLSHP)
    Rx Remote Command : the default is Disable Rx Remote Command.
                        (Set RXCMD to Enable Rx Remote Command)
  Send Remote Command : the default is Disable Send Remote Command.
                        (Set SENDCMD to Enable Send Remote Command)
      Rx Flow Control : the default is Disable Rx Flow Control.
                        (Set RXFLW to Enable Rx Flow Control)
      Tx Flow Control : the default is Disable Tx Flow Control.
                        (Set TXFLW to Enable Tx Flow Control)
          Virtual LAN : the default is Disable VLAN function.
                        (Set VLAN to Enable VLAN function)
           Line Speed : NO default value. (SPEED=10, SPEED=100)

     14. Select "Save parameters and load driver" to load DM9PCI driver.
     15. Following the screen prompt to complete the driver installation.

<<< End of file >>>

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.73