Package: DO-008863-LS
Product: Software 8.1: PC Driver Install Disks
Version: 8.1.0.16
Date: 08 November 2001
Description: Install disks for PC drivers for Software 8.1
Contents
========
1 Introduction
2 USB-Attached Modem
3 USB-Attached Gateway
4 PCI-Attached Modem
5 PCI-Attached Gateway
6 Reporting problems and questions
1 Introduction
~~~~~~~~~~~~
This package contains the PC driver files needed to construct the PC driver
install disks for Software 8.1. Note it does not contain the ISOS software
images - these will need to be built seperately.
The contents of this zip file are as follows:
readme-pc-driver.txt This file
\pc-drivers\vvbususb.sys VVB USB bus driver for BD3000/BD4000
\pc-drivers\vvbususb.inf Install script for vvbususb.sys
\pc-drivers\vvbuspci.sys VVB PCI bus driver for BD2500
\pc-drivers\vvbuspci.inf Install script for vvbuspci.sys
\pc-drivers\vvbatm.sys VVB Client ATM driver
\pc-drivers\vvbatm.inf Install script for vvbatm.sys
\pc-drivers\vvbeth.sys VVB Client Ethernet driver
\pc-drivers\vvbeth.inf Install script for vvbeth.sys
\pc-drivers\hfboot.sys USB boot driver
\pc-drivers\hfboot.inf Helium install script for hfboot.sys
\pc-drivers\beboot.inf Berllium install script for hfboot.sys
\pc-drivers\auboot.inf Helium 200/210 install script for hfboot.sys
\pc-drivers\rfc1483\net1483m.inf RFC1483 Win2000 installer for miniport (upper) edge
\pc-drivers\rfc1483\net1483p.inf RFC1483 Win2000 installer for protocol (lower) edge
\pc-drivers\rfc1483\cfg1483.dll RFC1483 Win2000 custom installer (Notify Object)
\pc-drivers\rfc1483\vrta1483.inf RFC1483 Win98SE installer (miniport and protocol)
\pc-drivers\rfc1483\ndi1483.dll RFC1483 Win98SE custom installer
\pc-drivers\rfc1483\vrta1483.sys RFC1483 NDIS Intermediate driver
\pc-drivers\rfc1483\stub9x.sys NDIS Windows98SE stub driver
2 USB-Attached Modem
~~~~~~~~~~~~~~~~~~~~
To make a PC install disk for the USB-Attached Modem copy the
following files to a floppy disk:
\pc-drivers\vvbususb.sys VVB USB bus driver
\pc-drivers\vvbususb.inf Install script for vvbususb.sys
\pc-drivers\vvbatm.sys VVB Client ATM driver
\pc-drivers\vvbatm.inf Install script for vvbatm.sys
\pc-drivers\vvbeth.sys VVB Client Ethernet driver
\pc-drivers\vvbeth.inf Install script for vvbeth.sys
\pc-drivers\hfboot.sys USB boot driver
It is then necessary to build the appropriate ISOS image for your
hardware and place this file (along with appropriate boot inf file) into
your release directory.
If you require a BD3000 to boot over USB the following files are required:
\pc-drivers\hfboot.inf Helium install script for hfboot.sys
bd3000-usb-modem\vrta-he.bin BD3000 image for USB-attached modem
If you require a BD4000 to boot over USB the following files are required:
\pc-drivers\beboot.inf Beryllium install script for hfboot.sys
bd4000-usb-modem\vrta-be.bin BD4000 image for USB-attached modem
If you require a BD6000, BD6221 or BD6100 to boot over USB the following
files are required:
\pc-drivers\auboot.inf Helium 2x0/100 install script for hfboot.sys
bd6000-usb-modem\vrta-ag.bin BD6XXX image for USB-attached modem
If you would like to support RFC1483 encapsulation over the DSL
link, the following files are required:
\pc-drivers\rfc1483\net1483m.inf RFC1483 Win2000 install script for miniport (upper) edge
\pc-drivers\rfc1483\net1483p.inf RFC1483 Win2000 install script for protocol (lower) edge
\pc-drivers\rfc1483\cfg1483.dll RFC1483 Win2000 custom installer (Notify Object)
\pc-drivers\rfc1483\vrta1483.inf RFC1483 Win98SE installer (miniport and protocol)
\pc-drivers\rfc1483\ndi1483.dll RFC1483 Win98SE custom installer
\pc-drivers\rfc1483\vrta1483.sys RFC1483 NDIS Intermediate driver
3 USB-Attached Gateway
~~~~~~~~~~~~~~~~~~~~~~
To make a PC install disk for the USB-Attached Gateway copy the
following files to a floppy disk:
\pc-drivers\vvbususb.sys VVB USB bus driver
\pc-drivers\vvbususb.inf Install script for vvbususb.sys
\pc-drivers\vvbeth.sys VVB Client Ethernet driver
\pc-drivers\vvbeth.inf Install script for vvbeth.sys
\pc-drivers\hfboot.sys USB boot driver
It is then necessary to build the appropriate ISOS image for your
hardware and place this file (along with appropriate boot inf file) into
your release directory.
If you require a BD3000 to boot over USB the following files
are required:
\pc-drivers\hfboot.inf Helium install script for hfboot.sys
bd3000-usb-gateway\vrta-he.bin BD3000 image for USB-attached gateway
If you require a BD4000 to boot over USB the following files
are required:
\pc-drivers\beboot.inf Beryllium install script for hfboot.sys
bd4000-usb-gateway\vrta-be.bin BD4000 image for USB-attached gateway
If you require a BD6000, BD6221 or BD6100 to boot over USB the following files
are required:
\pc-drivers\auboot.inf Helium 2x0/100 install script for hfboot.sys
bd6000-usb-gateway\vrta-ag.bin BD6000 image for USB-attached gateway
4 PCI-Attached Modem
~~~~~~~~~~~~~~~~~~~~
To make a PC install disk for the PCI-Attached Modem copy the
following files to a floppy disk:
\pc-drivers\vvbuspci.sys VVB PCI bus driver
\pc-drivers\vvbuspci.inf Install script for vvbususb.sys
\pc-drivers\vvbatm.sys VVB Client ATM driver
\pc-drivers\vvbatm.inf Install script for vvbatm.sys
\pc-drivers\vvbeth.sys VVB Client Ethernet driver
\pc-drivers\vvbeth.inf Install script for vvbeth.sys
It is then necessary to build the appropriate ISOS image and ISOS boot image
for your hardware and place these files into your release directory.
For Lithium you will also need to copy the following files:
bd2500-pci-modem\lisetup.bin Lithium boot image
bd2500-pci-modem\vrta-li.bin BD2500 image for PCI-attached modem
For Beryllium you will also need to copy the following file:
bd4000-pci-modem\vrta-be.bin BD4000 image for PCI-attached modem
If you would like to support RFC1483 encapsulation over the DSL
link, the following files are required:
\pc-drivers\rfc1483\net1483m.inf RFC1483 Win2000 install script for miniport (upper) edge
\pc-drivers\rfc1483\net1483p.inf RFC1483 Win2000 install script for protocol (lower) edge
\pc-drivers\rfc1483\cfg1483.dll RFC1483 Win2000 custom installer (Notify Object)
\pc-drivers\rfc1483\vrta1483.inf RFC1483 Win98SE installer (miniport and protocol)
\pc-drivers\rfc1483\ndi1483.dll RFC1483 Win98SE custom installer
\pc-drivers\rfc1483\vrta1483.sys RFC1483 NDIS Intermediate driver
5 PCI-Attached Gateway
~~~~~~~~~~~~~~~~~~~~~~
To make a PC install disk for the PCI-Attached Gateway copy the
following files to a floppy disk:
\pc-drivers\vvbuspci.sys VVB PCI bus driver
\pc-drivers\vvbuspci.inf Install script for vvbususb.sys
\pc-drivers\vvbeth.sys VVB Client Ethernet driver
\pc-drivers\vvbeth.inf Install script for vvbeth.sys
It is then necessary to build the appropriate ISOS image and ISOS boot image
for your hardware and place these files into your release directory.
For Lithium you will also need to copy the following files:
bd2500-pci-gateway\lisetup.bin Lithium boot image
bd2500-pci-gateway\vrta-li.bin BD2500 image for PCI-attached modem
For Beryllium you will also need to copy the following file:
bd4000-pci-gateway\vrta-be.bin BD4000 image for PCI-attached gateway
6 Reporting problems and questions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please report problems and questions via the problem reports area on
Virata's licensee web server at:
http://ls.virata.com
Make sure that any problem reports specify the project (release_v8.1) and
the build number (8.1.0.16) of the software.
Known problems and issues are listed at
https://ls.virata.com/secure/problem/report/KnownDefects/
(c) Copyright Virata Limited 2001
For support go to http://ls.virata.com or e-mail support@virata.com.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.