1. options.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (options.exe)

AITech International


Notice for MultiPro CTV, PSC-1106, ProPC/TV Plus users

	If your screen control utility is version 1.10, 3.00, or 3.00 for MultiPro CTV, PSC-1106, ProPC/TV Plus, respectively, you can upgrade it into 3.01 version! In this new version, a new function "Options" has been added. With this new feature, you can switch your screen display between VGA mode and TV mode so that you can get full screen display for VGA or TV without losing any information! Just follow the next steps: 

Step 1.
	 Copy the new screen control utility that is correct for your product (ms.exe for MultiPro CTV, wscrctrl.exe for PSC-1106 and ProPC/TV Plus) to the appropriate directory created with the initial install.  You will be asked to confirm the overwrite, answer Yes.  Copy the three display drivers ( Aitvga.drv, Aitsvg.drv. Aitvga95.drv to the  \windows\system directory. 

Step 2.
	Get the name of the current display driver listed in the [boot] section of the  SYSTEM.INI file located in the Windows subdirectory
		
	e.g.	[boot]
		display.drv = CURRENT DRIVER NAME HERE

Add next four lines into SYSTEM.INI

		[AITECH]
		DISPLAY= DRIVER NAME ;FROM [boot] SECTION ABOVE
		X=600
		Y=440

	After finishing these steps, run the new screen control utility. You will find "Options" button. Click it and you will be given the choices of VGA and TV display mode. Choose one and press OK to run that mode.

These instuctions apply to all versions of Windows.  Remember that for Windows 3.x the maximum color depth is 256 colors and for Win95 the maximum color depth is 16 colors.  This means that you need to be using a 256 color driver for Windows 3.x or a 16 color driver for Win95.  The default vga driver will work for both Windows 3.x and Win95.  The default SuperVGA driver will work with Windows 3.x only.