Setup.txt Driver File Contents (DVD-ROM_DRIVE_SD-M1002.zip)

For exclusive use of TOSHIBA ATAPI CD-ROM drives.

Supports:
H/H CD-ROM:
  XM-5602B, XM-5702B, XM-6002B, XM-6102B, XM-6202B, XM-6302B, XM-6402B,
  XM-6502, XM-6602B, XM-6702B

Slim CD-ROM:
  XM-1502B, XM-1602B, XM-2402B, XM-1702B, XM-1802B, XM-1902B, XM-7002B,
  XM-7102B

H/H DVD-ROM:*
  SD-M1002, SD-M1102, SD-M1202, SD-M1212, SD-M1222, SD-M1302, SD-M1402,
  SD-M1502

Slim DVD-ROM:*
  SD-C2002, SD-C2102, SD-C2202, SD-C2302, SD-C2402, SD-C2502

H/H COMBO:*
  SD-R1002

H/H DVD-RAM:*
  SD-W2002

*NOTE: DVD-ROM, RAM & Combo drives are only supported as CD-ROM drives.
 

How to manually setup the TOSHIBA CD-ROM device driver.

1. Copy the CD-ROM device driver to a system disk.

2. Add the following line to CONFIG.SYS of the system disk.

        LASTDRIVE=Z
        DEVICE=<drive>:<path>\TOSHVxxx.SYS /D:TOSCD001 /B /MAX/

3. Add the following line to AUTOEXEC.BAT.

                C:\DOS\MSCDEX.EXE /D:<device name>

4. Restart computer.


Option switches for TOSHVxxx.SYS

        /D:<device name>     Specifying the device name.
                             Must match the device name of MSCDEX.EXE.
        /C:<Spin Down time>  It specifies the time which the drive's motor
                             spins down when not in use. (Idle mode)
                             The following value can be specified.
                                   /C:1      125 ms
                                   /C:2      250 ms
                                   /C:3      500 ms
                                   /C:4        1 s
                                   /C:5        2 s
                                   /C:6        4 s
                                   /C:7        8 s
                                   /C:8       16 s
                                   /C:9       32 s     (Default)
                                   /C:A        1 min
                                   /C:B        2 min
                                   /C:C        4 min
                                   /C:D        8 min
                                   /C:E       16 min
                                   /C:F       32 min
        /V:                  Display the detailed information on power up.
        /B:                  Driver enables the DMA transfer. (See Note)
	/MAX		     Driver enables MAX DMA transfer. (See Note)

Note:   There is the following restrictive item for (/B) option switch.
1. Driver supports DMA transfer only for Intel Triton and Triton2 PCI Chip
     Set.
2. If doing DMA transfer with Intel Triton2 PCI chip set, use EMM386.EXE
     version below 4.49. (EMM386.EXE Version4.49 should be in MS-DOS 6.22.)
3. If application buffer address (store CD-ROM data) is not word align,
     the driver will not transfer data via DMA. (Use PIO transfer)
4. Use with /MAX switch for best results.

[For example]

        Device driver copied to C:\CDROM. Specifying TOSCD001 in the device
        name and specifying 1 minute in the Spin Down time.

                DEVICE=C:\CDROM\TOSHVxxx.SYS /D:TOSCD001 /C:A /B /MAX
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.81