NETDM9.INF Driver File Contents (DM9009.zip)

; /****************************************************************************
; ** Name: NETDM9.INF                                                        **
; ** THIS FILE IS Installation file for the DM9009                           **
; ** Fast PCI Ethernet Adapter.                                              **
; ** V1.00                                                                   **
; ** V1.01 - 10/05/2001 Spenser                                              **
; **       1. Add "DAVICOM 10/100 Low Power PCI Fast Ethernet Adapter "      **
; **       2. Add "DAVICOM Fiber PCI Fast Ethernet Adapter "                 **
; ** V1.02 - 11/02/2001 Spenser                                              **
; **       1. Add ArchTek's "10/100 PCI Ethernet Adapter " Adapter           **
; ** V1.03 - 01/06/2002 Spenser                                              **
; **       1. Only for WIN2000 install.                                      **
; ****************************************************************************/

[Version]
Signature   = "$Chicago$"
Compatible  = 1
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider    = %V_DSI%
DriverVer   = 12/06/2001, 1.39.01.1206
CatalogFile = dm90092k.cat

[Manufacturer]
%V_DSI% = DAVICOM

[ControlFlags]
ExcludeFromSelect = PCI\VEN_1282&DEV_9102, \
                    PCI\VEN_1282&DEV_9009&SUBSYS_82129161, \
                    PCI\VEN_1282&DEV_9009&SUBSYS_82126391, \
                    PCI\VEN_1282&DEV_9009&SUBSYS_82126291, \
                    PCI\VEN_1282&DEV_9009&SUBSYS_000814FE

[DAVICOM]
; DisplayName           Section       DeviceID
; -----------           -------       --------
%DM9161.DeviceDesc%  = DM9161.ndi,   PCI\VEN_1282&DEV_9009&SUBSYS_82129161
%DM9162.DeviceDesc%  = DM9162.ndi,   PCI\VEN_1282&DEV_9009&SUBSYS_82126291
%DM9163.DeviceDesc%  = DM9163.ndi,   PCI\VEN_1282&DEV_9009&SUBSYS_82126391
%ArchTek.DeviceDesc% = DM9161.ndi,   PCI\VEN_1282&DEV_9009&SUBSYS_000814FE
%DM9009.DeviceDesc%  = DM9009.ndi,   PCI\VEN_1282&DEV_9102
;=============================================================================
;
; WIN9x
;
;=============================================================================
[DM9161.ndi]
AddReg    = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles

[DM9162.ndi]
AddReg    = DM9009.id.reg, DM9102.pci.reg, DM9162.con.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles

[DM9163.ndi]
AddReg    = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles

[DM9009.ndi]
AddReg    = DM9009.id.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.win.reg, DM9102.con.win.reg
CopyFiles = dm9pci.win.CopyFiles

;=============================================================================
;
; WINNT specific entry
;
;=============================================================================
[DM9161.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg
CopyFIles       = DM9PCI.CopyFiles

[DM9161.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog
;----------------------------------------------------------------------------------------------

[DM9162.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9162.con.reg
CopyFIles       = DM9PCI.CopyFiles

[DM9162.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog
;----------------------------------------------------------------------------------------------

[DM9163.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg, DM9102.confe.reg
CopyFIles       = DM9PCI.CopyFiles

[DM9163.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog
;----------------------------------------------------------------------------------------------

[DM9009.ndi.NT]
Characteristics = 0x84
BusType         = 5
AddReg          = DM9009.id.reg, DM9PCI.reg, DM9102.pci.reg, DM9102.con.reg
CopyFIles       = DM9PCI.CopyFiles

[DM9009.ndi.NT.Services]
AddService = DM9102, 2, DM9102.Service, common.EventLog
;----------------------------------------------------------------------------------------------

[DM9PCI.CopyFiles]
DM9eth5.SYS,,,2


;=============================================================================
;
; Win9x id registry sections
; These are not needed by NT
;
;=============================================================================

[DM9009.id.reg]
HKR, Ndi, DeviceID, 0, "PCI\VEN_1282&DEV_9009"
HKR,,AdapterPCIID,0,"90091282"

;=============================================================================
;
; Win9x flags section
; Flags are not needed by NT
;
;=============================================================================
;****************************************************************************
; PCI common parameters
;****************************************************************************

[DM9102.pci.reg]
;params
HKR,                            , AdapterType, 0,"5"
HKR,                            , BusType,     0,"5"            ;; PCI

;StoreAndForward
HKR, Ndi\params\StoreAndForward,     ParamDesc, 0,"Store And Forward"
HKR, Ndi\params\StoreAndForward,       default, 0,"0"
HKR, Ndi\params\StoreAndForward,          type, 0,"enum"
HKR, Ndi\params\StoreAndForward\enum,        0, 0,"Disabled"
HKR, Ndi\params\StoreAndForward\enum,        1, 0,"Enabled"

;Transmit Threshold
HKR, Ndi\params\TransmitThreshold,   ParamDesc,,"Transmit Threshold"
HKR, Ndi\params\TransmitThreshold,     default, 0,"A0"
HKR, Ndi\params\TransmitThreshold,        type, 0,"enum"
HKR, Ndi\params\TransmitThreshold\enum,     48, 0,"  72 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     60, 0,"  96 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     80, 0," 128 bytes"
HKR, Ndi\params\TransmitThreshold\enum,     A0, 0," 160 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    100, 0," 256 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    200, 0," 512 bytes"
HKR, Ndi\params\TransmitThreshold\enum,    400, 0,"1024 bytes"

;ACPI Enable/Disable
HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME"
HKR,Ndi\params\ACPIEnable,default,,"5"
HKR,Ndi\params\ACPIEnable,type,,"enum"
HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled"
HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change" 
HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet"
HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match"
HKR,Ndi\params\ACPIEnable\enum,4,,"ALL"
HKR,Ndi\params\ACPIEnable\enum,5,,"Magic&Match Packet"

;VLAN
;HKR, Ndi\params\VLan,     ParamDesc, 0,"VLAN"
;HKR, Ndi\params\VLan,       default, 0,"0"
;HKR, Ndi\params\VLan,          type, 0,"enum"
;HKR, Ndi\params\VLan\enum,        0, 0,"Disabled"
;HKR, Ndi\params\VLan\enum,        1, 0,"Enabled"
HKR, , VLan,0,"0"

;Tx Flow Control
HKR, Ndi\params\TxFlowCtrl,     ParamDesc, 0,"Transmit Flow Control"
HKR, Ndi\params\TxFlowCtrl,       default, 0,"0"
HKR, Ndi\params\TxFlowCtrl,          type, 0,"enum"
HKR, Ndi\params\TxFlowCtrl\enum,        0, 0,"Disabled"
HKR, Ndi\params\TxFlowCtrl\enum,        1, 0,"Enabled"

;Rx Flow Control
HKR, Ndi\params\RxFlowCtrl,     ParamDesc, 0,"Receive Flow Control"
HKR, Ndi\params\RxFlowCtrl,       default, 0,"0"
HKR, Ndi\params\RxFlowCtrl,          type, 0,"enum"
HKR, Ndi\params\RxFlowCtrl\enum,        0, 0,"Disabled"
HKR, Ndi\params\RxFlowCtrl\enum,        1, 0,"Enabled"

[DM9102.con.reg]
;ConnectionType
HKR, Ndi\params\ConnectionType,      ParamDesc,  0,"Connection Type"
HKR, Ndi\params\ConnectionType,      default,    0,"0"
HKR, Ndi\params\ConnectionType,      type,       0,"enum"
HKR, Ndi\params\ConnectionType\enum, 0,          0,"AutoSense"
HKR, Ndi\params\ConnectionType\enum, 1,          0,"10Mbps"
HKR, Ndi\params\ConnectionType\enum, 3,          0,"10Mbps Full_Duplex"

[DM9102.confe.reg]
HKR, Ndi\params\ConnectionType\enum, 2,          0,"100Mbps"
HKR, Ndi\params\ConnectionType\enum, 4,          0,"100Mbps Full_Duplex"

[DM9162.con.reg]
;ConnectionType
HKR, Ndi\params\ConnectionType,      ParamDesc,  0,"Connection Type"
HKR, Ndi\params\ConnectionType,      default,    0,"0"
HKR, Ndi\params\ConnectionType,      type,       0,"enum"
HKR, Ndi\params\ConnectionType\enum, 0,          0,"AutoSense"
HKR, Ndi\params\ConnectionType\enum, 2,          0,"100Mbps"
HKR, Ndi\params\ConnectionType\enum, 4,          0,"100Mbps Full_Duplex"



[DM9102.con.win.reg]
HKR,NDI\params\ConnectionType,flag,1,20,00,00,00

;=============================================================================
;
; DM9102 NT specific
;
;=============================================================================

[DM9PCI.reg]
HKR, Ndi,                       Service,    0, "DM9102"
; use ndis5 as the upper bound because NT supports it
HKR, Ndi\Interfaces,            DefUpper,   0, "ndis5"
HKR, Ndi\Interfaces,            DefLower,   0, "ethernet"
HKR, Ndi\Interfaces,            UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces,            LowerRange, 0, "ethernet"
;HKR, ,  CoInstallers32, 0x00010000, "DM9Inst.dll, DM9InstProc"

[DM9102.Service]
DisplayName     = %DM9PCI.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\DM9eth5.SYS
LoadOrderGroup  = NDIS

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7

;=============================================================================
;
; DM9102 Win9x specific
;
;=============================================================================
[DM9102.win.reg]
HKR, ,              DevLoader,          0, "*ndis"
HKR, NDIS,          LogDriverName,      0, "DM9PCI"
HKR, NDIS,          MajorNdisVersion,   1, 03
HKR, NDIS,          MinorNdisVersion,   1, 0A

;HKR, ,              EnumPropPages,      0, "netdi.dll,EnumPropPages"
;HKR,Ndi,NdiInstaller,                    , "9009ndi.dll,DM9NdiProc"
HKR, Ndi\Interfaces,DefUpper,           0, "ndis3"
HKR, Ndi\Interfaces,DefLower,           0, "ethernet"
HKR, Ndi\Interfaces,UpperRange,         0, "ndis3"
HKR, Ndi\Interfaces,LowerRange,         0, "ethernet"
HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00
HKR,NDI\params\TransmitThreshold,flag,1,20,00,00,00
HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00

;=============================================================================
;
;Ndis driver selection
;
;=============================================================================
;HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version"
;HKR,Ndi\params\NdisVersion,default,,0
;HKR,Ndi\params\NdisVersion,type,,enum
;HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection"
;HKR,NDI\params\NdisVersion,flag,1,20,00,00,00

;=============================================================================
;
; DestinationDirs
;
;=============================================================================
[dm9pci.win.CopyFiles]
dm9eth5.sys
DM9eth4.SYS
DM9eth3.SYS

[DestinationDirs]
DefaultDestDir       =          12
DM9PCI.CopyFiles     =          12
dm9pci.win.CopyFiles =          11

[SourceDisksNames]
50="DAVICOM PCI Based Network Drivers Disk",,

[SourceDisksFiles]
DM9eth5.sys = 50,,10000
DM9eth4.sys = 50,,10000
DM9eth3.sys = 50,,10000

[Strings]
V_DSI    = "DAVICOM Semiconductor, Inc."
DM9161.DeviceDesc   = "DAVICOM 10/100 Low Power PCI Fast Ethernet Adapter "
DM9162.DeviceDesc   = "DAVICOM Fiber PCI Fast Ethernet Adapter            "
DM9163.DeviceDesc   = "DAVICOM Fiber/TP PCI Fast Ethernet Adapter         "
ArchTek.DeviceDesc  = "10/100 PCI Ethernet Adapter                        "
DM9009.DeviceDesc   = "DAVICOM 9009 PCI Fast Ethernet Adapter             "
DM9PCI.Service.DispName = "DAVICOM PCI Based Network Adapter NT Driver"



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.49