1. cardbus.zip Driver
  2. OEMSETNT.INF File Contents

OEMSETNT.INF Driver File Contents (cardbus.zip)

 DOWNLOAD NOW
OEMSETNT.INF Driver Update Utility 
;===============================================================================
; OEMSETNT.INF 
;                                                                               
; Platform Type : Intel x86
;                                                                        
; History:                                                                     
;                                                                              
;     01-JUN-1999   Rex   R0.0    Pre-release                                  
;                                                                              
;===============================================================================
[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
     PCI

[Options]
    MXIC100

[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

;--- Product information
Manufacturer    = "Macronix"
ProductMajorVersion     = "2"
ProductMinorVersion     = "00"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

;--- Software information
ProductSoftwareName     = "MXCB"
ProductSoftwareTitle    = "32-bit card bus 10/100 Mvps Fast Ethernet PC Card Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\MXCB.sys"
NetRuleSoftwareType     = "MXCBSys ndisDriver MXCBDriver"
NetRuleSoftwareUse        = $(SoftwareType)
NetRuleSoftwareBindForm = """MXCBSys"" yes no container"
NetRuleSoftwareClass    = {"MXCBDriver basic"}
NetRuleSoftwareSWBindable = {"MXCBDriver MXIC100Adapter non exclusive 100"}

;--- Help file information
OptionHelpFile = "MXNIC.hlp"

;--- Hardware information
ProductHardwareName = "MXCB"
ProductHardwareMXIC100Title = "32-bit card bus 10/100 Mvps Fast Ethernet PC Card"
NetRuleHardwareMXIC100Type  = "MXIC100 MXIC100Adapter"
NetRuleHardwareMXIC100Class = {"MXIC100Adapter basic"}
NetRuleHardwareBindForm = " yes yes container"

;--- Product information
;AdapterMXIC100Type = 5   ;; PCI board
AdapterMXIC100Type = 0
HelpMXIC100Id = 10
;DEC21143 MXIC100CFID = 1642513    ;; 0x00191011
MXIC100CFID = 87101658    ;; 0x53210d9 MX98723/MX98727

DirectEnable = 1

;--- Registry Key
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from        = ""
to          = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull           = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct        = ""
KeyParameters     = ""
TRUE              = 1
FALSE             = 0
NoTitle           = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath        = $(!STF_NTPATH)\drivers


[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media        = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status         = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)

        ifstr(i) $($1) == ""
           goto returnoptions
        endif

        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]


    ;--- set default value
    set Status   = STATUS_FAILED

    ;--- get parameters

    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    ;--- Checked Language supported
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

;   set NetRuleSoftwareBindable = $($R1)

    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif

    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(Function$(Option)Title)

    set to   = Begin
    set from = Begin

    set CommonStatus = STATUS_SUCCESSFUL
    EndWait


Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
                 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
                 ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
                 endif
                 set Error = $($R0)
                 set from = end
                 set to = end
                 goto nonfatalinfo
          else
                 set StartLabel = configureadapter
          endif
    else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif

    ;--- set parameters default value

    set ConnectionValue = *($(ConnectionList), 1)
    set IoBaseAddressValue = *($(IoBaseAddressList), 5)
    set MemoryBaseAddressValue = *($(MemoryBaseAddressList), 9)
    set IrqNumberValue = *($(IrqNumberList), 9)


    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +

    Set Source_Directory = ""

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
                 $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
                 set CommonStatus = STATUS_USERCANCEL
                 goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif

;     ifstr(i) $(DoCopy) == "YES"
;    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
            endif
            set Error = $($R0)
                 Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                 Goto successful
        Endif
        Set SrcDir = $($R1)
        install "Install-Hlp"
;     endif
    Goto installproduct

configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)

        ;
        Ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "IoBaseAddress"
            set IoBaseAddressIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
            set MemoryBaseAddressIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "InterruptNumber"
            set IrqNumberIndex = $(ValueData)
        endif
    EndForListDo

    ;
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 2)
    endif

    set IoBaseAddressValue = *($(IoBaseAddressList), ~($(IoBaseAddressValues),$(IoBaseAddressIndex)))
    ifstr(i) $(IoBaseAddressValue) == ""
        set IoBaseAddressValue = *($(IoBaseAddressList), 5)
    endif


    set MemoryBaseAddressValue = *($(MemoryBaseAddressList), ~($(MemoryBaseAddressValues),$(MemoryBaseAddressIndex)))
    ifstr(i) $(MemoryBaseAddressValue) == ""
        set MemoryBaseAddressValue = *($(MemoryBaseAddressList), 9)
    endif

    set IrqNumberValue = *($(IrqNumberList), ~($(IrqNumberValues),$(IrqNumberIndex)))
    ifstr(i) $(IrqNumberValue) == ""
        set IrqNumberValue = *($(IrqNumberList), 9)
    endif

adapteroptions = +
    set from = adapteroptions

    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"  $(hLib)

    ifstr(i) $(DLGEVENT) == "CONTINUE"
       set ConnectionIndex = $(Combo1Out)
       set IoBaseAddressIndex = $(Combo2Out)
       set MemoryBaseAddressIndex = $(Combo3Out)
       set IrqNumberIndex = $(Combo4Out)

       ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
       set CommonStatus = STATUS_USERCANCEL
       ui pop 1
       goto end
    else
       ui pop 1
       goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set IoBaseAddressValue = *($(IoBaseAddressValues), ~($(IoBaseAddressList),$(IoBaseAddressIndex)))
    set MemoryBaseAddressValue = *($(MemoryBaseAddressValues), ~($(MemoryBaseAddressList),$(MemoryBaseAddressIndex)))
    set IrqNumberValue = *($(IrqNumberValues), ~($(IrqNumberList),$(IrqNumberIndex)))

    ifstr(i) $(!NTN_InstallMode) == configure
       goto updateparameters
    endif

installproduct =+

    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"  $(hLib)


    ifstr(i) $(DLGEVENT) == "CONTINUE"
         set ConnectionIndex = $(Combo1Out)
         set IoBaseAddressIndex = $(Combo2Out)
         set MemoryBaseAddressIndex = $(Combo3Out)
         set IrqNumberIndex = $(Combo4Out)

         ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
         set CommonStatus = STATUS_USERCANCEL
         ui pop 1
         goto end
    else
         ui pop 1
         goto end
    endif


    StartWait

    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
                 Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                 ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
                 endif
                 set Error = $($R0)
                 Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
                 Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey        = $($R1)
        Set SoftNetRuleKey        = $($R2)
        Set SoftServiceKey        = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey        = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif

    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    ifint $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
         EndWait
         CloseRegKey $($R1)
         CloseRegKey $($R2)
         CloseRegKey $($R3)
         goto fatalregistry
    endif

    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set IoBaseAddressValue = *($(IoBaseAddressValues), ~($(IoBaseAddressList),$(IoBaseAddressIndex)))
    set MemoryBaseAddressValue = *($(MemoryBaseAddressValues), ~($(MemoryBaseAddressList),$(MemoryBaseAddressIndex)))
    set IrqNumberValue = *($(IrqNumberValues), ~($(IrqNumberList),$(IrqNumberIndex)))


    Set HardNetCardKey        = $($R1)
    Set HardNetRuleKey        = $($R2)
    Set HardParameterKey    = $($R3)
    set AdapterNumber = $($R4)
    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                        {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                        {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                        {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                        {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                        {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
         goto ShellCodeError
    endif

    set BusTypeNum = 5

    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                        {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                        {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                        {BusNumber,$(NoTitle),$(!REG_VT_DWORD),0}}

    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifint $($(Option)CFID) == $(MXIC100CFID)
        set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
        Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
    endif
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}, +
                        {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddressValue)}, +
                        {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryBaseAddressValue)}, +
                        {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IrqNumberValue)}, +
                        {DirectEnable,$(NoTitle),$(!REG_VT_DWORD),1}}


    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(HardNetCardKey)
    CloseRegKey $(HardNetRuleKey)
    CloseRegKey $(HardParameterKey)

    ; Disable PCMCIA.SYS
    ;-------------------
    set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
    OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
    SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD), 4}
    CloseRegKey $(PCMCIAKey)

    EndWait
    goto successful

updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}, +
                        {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddressValue)}, +
                        {MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryBaseAddressValue)}, +
                        {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IrqNumberValue)}, +
                        {DirectEnable,$(NoTitle),$(!REG_VT_DWORD),1}}

    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif

    ;Enable PCMCIA.SYS
    ;----------------------
    set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
    OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
    SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0}
    CloseRegKey $(PCMCIAKey)

    goto end

UpgradeSoftware = +
     Set Source_Directory = ""

     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 Debug-Output "ShellCode error"
                 goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                 goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end

successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end

warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif

nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg

nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg

nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif

fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal

fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed

ShellCodeError = +
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
         set !STF_NCPA_FLUSH_COPYLIST = TRUE
         CopyFilesInCopyList
    endif

    Exit


[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit

[Install-Update]
    set STF_VITAL          = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
;    AddSectionFilesToCopyList Files-Dll $(SrcDir)$(Dll_Directory) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Source Media Descriptions]
    1  = "Macronix CardBus Lan Card Driver Disk"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1, OEMSETNT.INF,    SIZE=1000,     RENAME=$(!UG_Filename)

[Files-MXIC100]
1,MXCB.SYS , SIZE=999 

[Files-Hlp]
1,MXNIC.HLP , SIZE=999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    MXIC100  = "32-bit card bus 10/100 Mvps Fast Ethernet PC Card"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "Macronix NDIS 3 driver"

FunctionMXIC100Title = "Macronix CardBus LAN Card Setup"
ProductHardwareMXIC100Description = "32-bit card bus 10/100 Mvps Fast Ethernet PC Card"

ConnectionList  = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
IoBaseAddressList  = ^(IoBaseAddressChoices, 1)
IoBaseAddressValues = ^(IoBaseAddressChoices, 2)
MemoryBaseAddressList  = ^(MemoryBaseAddressChoices, 1)
MemoryBaseAddressValues = ^(MemoryBaseAddressChoices, 2)
IrqNumberList  = ^(IrqNumberChoices, 1)
IrqNumberValues = ^(IrqNumberChoices, 2)

NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText        = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"

[DialogConstantsENG]
Help          = "&Help"
Exit          = "Cancel"
OK            = "OK"
HelpContext   = ""
Continue      = "Continue"
Cancel        = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the working parameters for the network adapter.  "

DlgTemplate = "EE_16"
DlgType = "Combination"
Caption = $(Function$(Option)Title)

Combo1Label = "Connection Type:"
Combo2Label = "I/O Port:"
Combo3Label = "Memory Base Address:"
Combo4Label = "Interrupt Number:"
;Combo5Label = "Socket Number:"
;Combo6Label = "Interrupt Style:"
;Combo7Label = "Interrupt Routing:"
;Combo8Label = "Store And Forward:"

Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
Combo2List = $(IoBaseAddressList)
Combo2Out  = $(IoBaseAddressValue)
Combo3List = $(MemoryBaseAddressList)
Combo3Out  = $(MemoryBaseAddressValue)
Combo4List = $(IrqNumberList)
Combo4Out  = $(IrqNumberValue)

ComboListItemsIn  = {Combo1List,Combo2List,Combo3List, Combo4List} 
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out} 

EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1050
NotifyFields = {NO, NO, NO, NO} 
HelpContext = $(Help$(Option)Id)

[ConnectionChoices]
    Connect_0 = "Speed AutoDetect",  0
    Connect_1 = "100Mb Full Duplex", 1
    Connect_2 = "100Mb Half Duplex", 2
    Connect_3 = "10Mb  Full Duplex", 3
    Connect_4 = "10Mb  Half Duplex", 4

[IoBaseAddressChoices]
    IoBase_0  = "D000", 53248
    IoBase_1  = "D400", 54272
    IoBase_2  = "D800", 55296
    IoBase_3  = "DC00", 56320
    IoBase_4  = "E000", 57344
    IoBase_5  = "E400", 58368
    IoBase_6  = "E800", 59392
    IoBase_7  = "EC00", 60416

[IrqNumberChoices]
    Irq_0 = "IRQ 3", 3
    Irq_1 = "IRQ 4", 4
    Irq_2 = "IRQ 5", 5
    Irq_3 = "IRQ 9", 9
    Irq_4 = "IRQ 10", 10
    Irq_5 = "IRQ 11", 11
    Irq_6 = "IRQ 12", 12
    Irq_7 = "IRQ 15", 15
    Irq_8 = "Default", 255

[MemoryBaseAddressChoices]
    MemBase_0  = "C8000", 819200
    MemBase_1  = "C9000", 823296
    MemBase_2  = "CA000", 827392
    MemBase_3  = "CB000", 831488
    MemBase_4  = "CC000", 835584
    MemBase_5  = "CD000", 839680
    MemBase_6  = "CE000", 843776
    MemBase_7  = "CF000", 847872
    MemBase_8  = "D0000", 851968
    MemBase_9  = "D1000", 856064
    MemBase_10 = "D2000", 860160
    MemBase_11 = "D3000", 864256
    MemBase_12 = "D4000", 868352
    MemBase_13 = "D5000", 872448
    MemBase_14 = "D6000", 876544
    MemBase_15 = "D7000", 880640
    MemBase_16 = "D8000", 884736
    MemBase_17 = "D9000", 888832
    MemBase_18 = "DA000", 892928
    MemBase_19 = "DB000", 897024
    MemBase_20 = "DC000", 901120
    MemBase_21 = "DD000", 905216
    MemBase_22 = "DE000", 909312
    MemBase_23 = "DF000", 913408
    MemBase_24 = "E0000", 917504
    MemBase_25 = "E1000", 921600
    MemBase_26 = "E2000", 925696
    MemBase_27 = "E3000", 929792
    MemBase_28 = "E4000", 933888
    MemBase_29 = "E5000", 937984
    MemBase_31 = "E6000", 942080
    MemBase_32 = "E7000", 946176
    MemBase_33 = "E8000", 950272
    MemBase_34 = "E9000", 954368
    MemBase_35 = "EA000", 958464
    MemBase_36 = "EB000", 962560
    MemBase_37 = "EC000", 966656
    MemBase_38 = "ED000", 970752
    MemBase_39 = "EE000", 974848
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 4.80