1. EAdmin_v383.zip Driver
2. PrintServer Manager ReleaseNote.txt File Contents

PrintServer Manager ReleaseNote.txt Driver File Contents (EAdmin_v383.zip)

PS MANAGER Release Note:
---------------------------------------------------------------------------------------- 
2.4
                    1.WEP
                        HEX mode input added
                        HEX mode key length limit to 10 for 64bits, 26 for 128 bits
                        Disable PassPhrase when ASCII mode
----------------------------------------------------------------------------------------                        
2.41
                PassPhrase for 128-bits ( 4 different Keys) in  Manager
----------------------------------------------------------------------------------------                
2.42
                Fix problem of WPA  ( writing to the value WLAN_MAC_ADDR ) in Manager
----------------------------------------------------------------------------------------                
2.43
                
               Wording Change :
                  Security Mode:WPA => WPA shared key
                  WPA Algorithm list chaned to: TKIP,AES
----------------------------------------------------------------------------------------                  
2.44  
                Change for Hawking model name
----------------------------------------------------------------------------------------                
2.45 
                fix rebooting problem found by landy
----------------------------------------------------------------------------------------                
2.46
                WEP,WPA input text showing with "*"             
----------------------------------------------------------------------------------------                
2.47
                    1.fix the wireless SCAN problem in Manager2.46
                       -after scaning,losing connection with print server
                    2.fix the Summary page of wizard in Manager2.46
                       -Security disabled, Summary page shows WPA
                    3.Change SYSTEM SETTING page - button "Restore" to "Load Default"
                    4.Make notice for upgrade fail
                      -"Upgrade Time Out! Try the upgrade again. NOTICE: DO NOT power off your print server"
----------------------------------------------------------------------------------------                      
2.48
                        1.Site Survery fixed with XP SP2(enabled firewall) #refer to BUG16
                        2.fix WEP KEY typing switch problem (Hello = > elloH)   #refer to BUG20
----------------------------------------------------------------------------------------                        
2.49
		1.Check if PC and Print Server are in the same subnet before upgrade
		2.SDT logo enlarge
----------------------------------------------------------------------------------------                        
2.50
		1.Fixed the IP mode shows different result in TCP/IP settings and Wireless setting.
		2.Check if Static IP and DHCP IP are in the same subnet.
		3.Fixed Encryption Setting display bug(64bit WEP becames 128bit WEP).
		4.Restrict the max length of Print Server Name.(Old version is 16 , other is 48 )
----------------------------------------------------------------------------------------                        
2.51
                1.fix WPA-PSK typing switch problem (Hello = > elloH)   #refer to BUG20
----------------------------------------------------------------------------------------                        
2.52
		1.Check if PC and Print Server are in the same subnet before upgrade(Only for 05 series)
		2.Check if Print Server IP and Gateway are in the same subnet.
		3.Check if DHCP IP and Gateway are in the same subnet.
		4.Fixed Wizard may not get the Wireless information.
		5.RAW Printing Shows from "Not support" to "Enable" on print server status tree for 03 and 06 series.
		
	for pure version
		1.DHCP Server disable on restore default.
		2.Default IP 10.0.0.1 for 03 series.
		3.Default IP 192.168.2.1 for 05 series.
		4.Default IP 192.168.2.2 for 06 series.