Packet Driver
Introduction:
-------------
This document describes the procedure to setup the Packet driver for
the PCMCIA Ethernet card.
You must run Socket/Card services device driver and/or Enable program
before you invoke any Ethernet driver. For the detailed information on
how to insatll PCMCIA driver, please refer to the User's Manual or the
"About PCMCIA" section in README file.
Location of Driver: \PKTDRV\AX8190PD.COM
------------------
Sample Configuration Files:
---------------------------
AUTOEXEC.BAT
AX8190PD 0x60
Notes:
------
1. Load the packet driver using the software interrupt and any
optional switches if required.
Usage: AX8190PD [options] <packet_int_no> <int_level> <io_addr>
Example: AX8190PD 0x7e 0x5 0x300
The only required parameter is the software interrupt. A packet
driver needs to have a software interrupt assigned to it for other
programs to access it. The recommended interrupt is 0x7e. If you
need any of the options listed below, place them ahead of the
software interrupt on the command line.
-i -- Force driver to report itself as IEEE 802.3 instead of
Ethernet II.
-d -- Delayed initialization. Used for diskless booting
-n -- NetWare conversion. Converts 802.3 packets into 8137
packets
-w -- Windows hack, obsoleted by winpkt
-p -- Promiscuous mode disable
-a -- Auto-Negotiation Mode
-1 -- Line Speed 10M, Half Duplex Mode
-2 -- Line Speed 10M, Full Duplex Mode
-3 -- Line Speed 100M, Half Duplex Mode
-4 -- Line Speed 100M, Full Duplex Mode
-u -- Uninstall
3. Run AX8190PD.COM, the screen will appear following message:
TCP/IP Packet driver for 16-bit Ethernet card Rev. 1.0.0
Copyright All rights reserved.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.